| Pos | standard Number | publication date | Language | Description |
| 1 | SAE AS3240B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A |
| 2 | SAE AS3239B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A |
| 3 | SAE AS3249B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A |
| 4 | SAE AS3248B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A |
| 5 | SAE AS3247B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A |
| 6 | SAE AS3246B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A |
| 7 | SAE AS3251B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CRES, UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A |
| 8 | SAE AS3252B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CRES, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A |
| 9 | SAE AS3236B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A |
| 10 | SAE AS3245B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A |
| 11 | SAE AS3244B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A |
| 12 | SAE AS3243B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A |
| 13 | SAE AS3242B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A |
| 14 | SAE J2583-2002 | 2002-06-01(R 2007) | English | Directional Drilling Planning and Mapping Nomenclature |
| 15 | SAE AS27641B-2002 | 2002-06-01 | English | (R) Bearing, Ball, Airframe, Anti-Friction, Intermediate Duty
DoD Adopted |
| 16 | SAE ARP711A-2002 | 2002-06-01 | English | Illuminated Signs |
| 17 | SAE AS27649B-2002 | 2002-06-01 | English | (R) Bearing, Ball, Airframe, Antifriction, Intermediate Duty
DoD Adopted |
| 18 | SAE AS27648B-2002 | 2002-06-01 | English | (R) Bearing, Ball, Airframe, Anti-Friction, External Self Aligning, Extra Light Duty
DoD Adopted |
| 19 | SAE AS27647B-2002 | 2002-06-01 | English | (R) Bearing, Ball, Airframe, Anti-Friction, Extra Wide, Double Row, Intermediate Duty
DoD Adopted |
| 20 | SAE AS27646B-2002 | 2002-06-01 | English | (R) Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty
DoD Adopted |
| 21 | SAE AIR5113-2002 | 2002-06-01 | English | Legal Issues Associated with the Use of Probabilistic Design Methods |
| 22 | SAE AS27644B-2002 | 2002-06-01 | English | (R) Bearing, Ball, Airframe, Anti-Friction, Double Row, Heavy Duty
DoD Adopted |
| 23 | SAE AS27643B-2002 | 2002-06-01 | English | (R) Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Double Row, Heavy Duty
DoD Adopted |
| 24 | SAE AS27642B-2002 | 2002-06-01 | English | (R) Bearing, Ball, Airframe, Extra Light Duty
DoD Adopted |
| 25 | SAE ARP5448/4-2002 | 2002-06-01 | English | Plain Bearing Bond Integrity - Peelable Woven Fabric PTFE Liners |
| 26 | SAE J1858-2002 | 2002-06-01 | English | Full Flow Lubricating Oil Filters Multipass Method for Evaluating Filtration Performance, Standard |
| 27 | SAE AS5072C-2002 | 2002-05-01(R 2013) | English | Coupling Assemblies, Non-Locking Probe Style, Miniature Self-Aligning, Self-Sealing Disconnects |
| 28 | SAE AS5072/1A-2002 | 2002-05-01(R 2013) | English | COUPLING ASSEMBLY, .375 DIAMETER, NON-LOCKING PROBE STYLE, MINIATURE SELF-SEALING-ALIGNING, SELF-SEALING DISCONNECT FOR ETHYLENE/GLYCOL/WATER |
| 29 | SAE AS5072/3A-2002 | 2002-05-01(R 2013) | English | COUPLING ASSEMBLY, .420 DIAMETER, NON-LOCKING PROBE STYLE, MINIATURE SELF-SEALING-ALIGNING, SELF-SEALING DISCONNECT FOR ETHYLENE/GLYCOL/WATER |
| 30 | SAE AS5072/2A-2002 | 2002-05-01(R 2013) | English | COUPLING ASSEMBLY, .375 DIAMETER, NON-LOCKING PROBE STYLE, MINIATURE SELF-SEALING-ALIGNING, SELF-SEALING DISCONNECT FOR POLYALPHAOLEFIN FLUID |
| 31 | SAE AIR4777A-2002 | 2002-05-01(R 2012) | English | Nondestructive Inspection (NDI) Methods Used During Production and Operation of Aircraft Wheels and Brakes |
| 32 | SAE ARP5448/6-2002 | 2002-05-01(R 2010) | English | Plain Spherical Bearing Conformity Examination |
| 33 | SAE J2224-2002 | 2002-05-01(R 2008) | English | Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging |
| 34 | SAE AS5072C-2002 | 2002-05-01(R 2007) | English | Coupling Assemblies, Non-Locking Probe Style, Miniature Self-Aligning, Self-Sealing Disconnects |
| 35 | SAE AIR4777A-2002 | 2002-05-01(R 2007) | English | Nondestructive Inspection (NDI) Methods Used During Production and Operation of Aircraft Wheels and Brakes |
| 36 | SAE AS5072/3A-2002 | 2002-05-01(R 2007) | English | Coupling Assembly, .420 Diameter, Non-Locking Probe Style, Miniature Self-Sealing-Aligning, Self-Sealing Disconnect for Ethylene/Glycol/Water |
| 37 | SAE AS5072/2A-2002 | 2002-05-01(R 2007) | English | Coupling Assembly, .375 Diameter, Non-Locking Probe Style, Miniature Self-Sealing-Aligning, Self-Sealing Disconnect for Ethylene/Glycol/Water |
| 38 | SAE AS5072/1A-2002 | 2002-05-01(R 2007) | English | Coupling Assembly, .375 Diameter, Non-Locking Probe Style, Miniature Self-Sealing-Aligning, Self-Sealing Disconnect for Ethylene/Glycol/ Water |
| 39 | SAE AS5902-2002 | 2002-05-01(R 2007) | English | Installation of Externally Swaged Fittings |
| 40 | SAE AS1708D-2002 | 2002-05-01(R 2007) | English | Fitting End, Internal Flare Design Standard
DoD Adopted |
| 41 | SAE AS85075/2-2002 | 2002-05-01 | English | Tie Down Assembly, Helicopter Blade CH-53 Helicopter |
| 42 | SAE J1940-2002 | 2002-05-01 | English | (R) Small Engine Power and Torque Rating Procedure |
| 43 | SAE AS5902-2002 | 2002-05-01 | English | Installation of Externally Swaged Fittings |
| 44 | SAE AS85075/1-2002 | 2002-05-01 | English | Tie Down Assembly, Helicopter Blade CH-46 Helicopter |
| 45 | SAE AS85075/2-2002 | 2002-05-01 | English | Tie Down Assembly, Helicopter Blade CH-53 Helicopter |
| 46 | SAE J1652-2002 | 2002-05-01 | English | Dynamometer Effectiveness Characterization Test for Passenger Car and Light Truck Caliper Disc Brake Friction Materials, Recommended Practice |
| 47 | SAE J2365-2002 | 2002-05-01 | English | Calculation of the Time to Complete In-Vehicle Navigation and Route Guidance Tasks |
| 48 | SAE AS85896-2002 | 2002-05-01 | English | Ladder, Aircraft Maintenance, Aluminum, Three-Way Combination (Step, Straight and Extension), General Specification for |
| 49 | SAE AIR4978B-2002 | 2002-05-01 | English | Temporary Methods for Assessing the Load Carrying Capacity of Aircraft Propulsion System Lubricating Oils |
| 50 | SAE AIR1673A-2002 | 2002-04-01(R 2013) | English | Aircraft Cargo Door Opening/Sill Details for Ground Support Equipment Interface |
| 51 | SAE ARP5311-2002 | 2002-04-01(R 2009) | English | Aerospace-Interface Definition for Mechanical Actuation Subsystems |
| 52 | SAE AMS2423D-2002 | 2002-04-01(R 2009) | English | (R) Plating, Nickel Hard Deposit |
| 53 | SAE AIR1673A-2002 | 2002-04-01(R 2008) | English | Aircraft Cargo Door Opening/Sill Details for Ground Support Equipment Interface |
| 54 | SAE AIR1608A-2002 | 2002-04-01(R 2008) | English | Estimation of Total Error in Altimetry |
| 55 | SAE AIR1093A-2002 | 2002-04-01(R 2008) | English | Numeral, Letter and Symbol Dimensions for Aircraft Instrument Displays |
| 56 | SAE ARP5415A-2002 | 2002-04-01(R 2008) | English | User聮s Manual for Certification of Aircraft Electrical/Electronic Systems for the Indirect Effects of Lightning |
| 57 | SAE ARP1757A-2002 | 2002-04-01(R 2007) | English | Symbology for Standardization of Cargo Handling Systems |
| 58 | SAE AMS2413E-2002 | 2002-04-01(R 2007) | English | Plating, Silver-Rhodium
DoD Adopted |
| 59 | SAE AMS2675G-2002 | 2002-04-01(R 2006) | English | Brazing, Nickel Alloy Filler Metal |
| 60 | SAE J2610-2002 | 2002-04-01 | English | Serial Data Communication Interface |
| 61 | SAE J2623-2002 | 2002-04-01 | English | Standard Rainflow File Format |
| 62 | SAE J2576-2002 | 2002-04-01 | English | Blade Fuses - 42 V System |
| 63 | SAE ARP5311-2002 | 2002-04-01 | English | Aerospace-Interface Definition for Mechanical Actuation Subsystems |
| 64 | SAE ARP5311-2002 | 2002-04-01 | English | Aerospace-Interface Definition for Mechanical Actuation Subsystems |
| 65 | SAE AS5370-2002 | 2002-04-01 | English | Multi-Transmitter Bidirectional Fiber-Optic Data Bus for Distributed Aircraft Control Systems |
| 66 | SAE J1962-2002 | 2002-04-01 | English | (R) Diagnostic Connector Equivalent to ISO/DIS 15031-3:December 14, 2001
ANSI Approved |
| 67 | SAE J1978-2002 | 2002-04-01 | English | OBD II Scan Tool Equivalent to ISO/DIS 15031-4:December 14, 2001
ANSI Approved |
| 68 | SAE AS9101A-2002 | 2002-04-01 | English | Quality System Assessment - Remains Current |
| 69 | SAE J2366-7-2002 | 2002-04-01 | English | ITS Data BusApplication Message Layer |
| 70 | SAE J866-2002 | 2002-04-01 | English | Friction Coefficient Identification System for Brake Linings |
| 71 | SAE AMS2262G-2002 | 2002-03-01(R 2013) | English | Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate(DoD Adopted) |
| 72 | SAE J1783-2002 | 2002-03-01(R 2013) | English | Ship Systems and Equipment - Selection of Hydraulic Directional Control Valves |
| 73 | SAE MA4038B-2002 | 2002-03-01(R 2012) | English | WASHER, KEY - 180° LOCKING, CRES, UNS S32100, METRIC |
| 74 | SAE AS9467A-2002 | 2002-03-01(R 2012) | English | PIN, STRAIGHT, HEADED, .436 DIAMETER, CRES, UNS S66286 |
| 75 | SAE AS9466A-2002 | 2002-03-01(R 2012) | English | PIN, STRAIGHT, HEADED, .373 DIAMETER, CRES, UNS S66286 |
| 76 | SAE AS9465A-2002 | 2002-03-01(R 2012) | English | PIN, STRAIGHT, HEADED, .311 DIAMETER, CRES, UNS S66286 |
| 77 | SAE AS9463A-2002 | 2002-03-01(R 2012) | English | PIN, STRAIGHT, HEADED, .186 DIAMETER, CRES, UNS S66286 |
| 78 | SAE AS9462A-2002 | 2002-03-01(R 2012) | English | PIN, STRAIGHT, HEADED, .124 DIAMETER, CRES, UNS S66286 |
| 79 | SAE ARP5584-2002 | 2002-03-01(R 2011) | English | Document for Electric Power Management
DoD Adopted |
| 80 | SAE AMS1630C-2002 | 2002-03-01(R 2008) | English | Cleaner, Carpet Shampoo Type |
| 81 | SAE AIR5784-2002 | 2002-03-01(R 2008) | English | A Review of Literature on the Relationship Between Gas Turbine Engine Lubricants and Aircraft Cabin Air Quality |
| 82 | SAE AS9462A-2002 | 2002-03-01(R 2007) | English | (R) PIN, STRAIGHT, HEADED, .124 DIAMETER, CRES, UNS S66286
DoD Adopted |
| 83 | SAE AS9583A-2002 | 2002-03-01(R 2007) | English | (R) Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi Min, .1900-32 UNJF-3A
DoD Adopted |
| 84 | SAE AS9584A-2002 | 2002-03-01(R 2007) | English | (R) Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi Min, .2500-28 UNJF-3A
DoD Adopted |
| 85 | SAE AS9585A-2002 | 2002-03-01(R 2007) | English | (R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A
DoD Adopted |
| 86 | SAE AS9587A-2002 | 2002-03-01(R 2007) | English | (R) Bolt, Machine-Hexagon Head, Drilled 6 Holes, Full Shank, UNS S66286, 130 ksi Min, .4375-20 UNJF-3A
DoD Adopted |
| 87 | SAE AS9466A-2002 | 2002-03-01(R 2007) | English | (R) Pin, Straight, Headed, .373 Diameter, Cres, UNS S66286
DoD Adopted |
| 88 | SAE AS9467A-2002 | 2002-03-01(R 2007) | English | (R) Pin, Straight, Headed, .436 Diameter, Cres, UNS S66286
DoD Adopted |
| 89 | SAE AS3482C-2002 | 2002-03-01(R 2007) | English | NUT, SELF-LOCKING, PLATE, SIDE BY SIDE, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 掳F
DoD Adopted |
| 90 | SAE AS3481E-2002 | 2002-03-01(R 2007) | English | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 掳F
DoD Adopted |
| 91 | SAE AS9574A-2002 | 2002-03-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A
DoD Adopted |
| 92 | SAE AS9573A-2002 | 2002-03-01(R 2007) | English | (R) Screw, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 Ksi Min, .1640-36 UNJF-3A
DoD Adopted |
| 93 | SAE AS9572A-2002 | 2002-03-01(R 2007) | English | (R) Screw, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 KSI Min, .1380-40 UNJF-3A
DoD Adopted |
| 94 | SAE AS9588A-2002 | 2002-03-01(R 2007) | English | (R) Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi Min, .5000-20 UNJF-3A
DoD Adopted |
| 95 | SAE AS9579A-2002 | 2002-03-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A
DoD Adopted |
| 96 | SAE AS9463A-2002 | 2002-03-01(R 2007) | English | (R) Pin, Straight, Headed, .186 Diameter, CRES, UNS S66286
DoD Adopted |
| 97 | SAE AS9465A-2002 | 2002-03-01(R 2007) | English | (R) Pin, Straight, Headed, .311 Diameter, Cres, UNS S66286
DoD Adopted |
| 98 | SAE AS9397A-2002 | 2002-03-01(R 2007) | English | (R) Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 KSI MIN, Chamfered, .1900-32 UNJF-3A
DoD Adopted |
| 99 | SAE MA4038B-2002 | 2002-03-01(R 2007) | English | WASHER, KEY - 180掳 LOCKING, CRES, UNS S32100, METRIC
DoD Adopted |
| 100 | SAE AS3478C-2002 | 2002-03-01(R 2007) | English | NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 掳F |
| 101 | SAE AS3480C-2002 | 2002-03-01(R 2007) | English | Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F
DoD Adopted |
| 102 | SAE AS85421/2A-2002 | 2002-03-01(R 2007) | English | Fitting End, Standard Dimensions for Bulkhead, Dynamic Beam Seal, Male
DoD Adopted |
| 103 | SAE AMS5507F-2002 | 2002-03-01(R 2006) | English | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 13Ni - 2.5Mo (SAE 30316L) Solution Heat Treated - UNS S31603
DoD Adopted |
| 104 | SAE AMS5582E-2002 | 2002-03-01(R 2006) | English | Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable to 155 ksi (1069 MPa) Tensile Strength - UNS N07750
DoD Adopted |
| 105 | SAE AMS6419F-2002 | 2002-03-01(R 2006) | English | Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.45C) Consumable Electrode Vacuum Remelted - UNS K44220
DoD Adopted |
| 106 | SAE AMS5583D-2002 | 2002-03-01(R 2006) | English | Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Vacuum Melted Solution Heat Treated, Precipitation Hardenable to 170 ksi (1172 MPa) Tensile Strength - UNS N07750
DoD Adopted |
| 107 | SAE AMS2262G-2002 | 2002-03-01(R 2006) | English | Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate
DoD Adopted |
| 108 | SAE J1783-2002 | 2002-03-01 | English | (R) Ship Systems and EquipmentSelection of Hydraulic Directional Control Valves
DoD Adopted |
| 109 | SAE J1664-2002 | 2002-03-01 | English | Passenger Car and Light Truck Fuel Containment, Information Report |
| 110 | SAE J1961-2002 | 2002-03-01 | English | (R) Accelerated Exposure of Automotive Exterior Materials Using A Solar Fresnel Reflector Apparatus |
| 111 | SAE J1976-2002 | 2002-03-01 | English | (R) Outdoor Weathering of Exterior Materials |
| 112 | SAE J2284-1-2002 | 2002-03-01 | English | High Speed CAN (HSC) for Vehicle Applications at 125 Kbps |
| 113 | SAE J2284-2-2002 | 2002-03-01 | English | High Speed CAN (HSC) for Vehicle Applications at 250 Kbps |
| 114 | SAE AIR5784-2002 | 2002-03-01 | English | A Review of Literature on the Relationship Between Gas Turbine Engine Lubricants and Aircraft Cabin Air Quality |
| 115 | SAE AS5127A-2002 | 2002-03-01 | English | Methods for Testing Aerospace Sealants |
| 116 | SAE J2574-2002 | 2002-03-01 | English | Fuel Cell Vehicle Terminology |
| 117 | SAE AS85188-2002 | 2002-03-01 | English | Riveter, Power, Pneumatic-Hydraulic Blind Rivet Installation |
| 118 | SAE ARP5584-2002 | 2002-03-01 | English | Document for Electric Power Management
DoD Adopted |
| 119 | SAE AS85848-2002 | 2002-03-01 | English | Sleeving, for Identification Marking, Heat Shrinkable, General Specification for
DoD Adopted |
| 120 | SAE J2366-4-2002 | 2002-03-01 | English | ITS Data BusThin Transport Layer |
| 121 | SAE J2388-2002 | 2002-03-01 | English | Secondary Control Modifications |
| 122 | SAE J2406-2002 | 2002-03-01 | English | Recommended Practices for CNG Powered Medium and Heavy-Duty Trucks |
| 123 | SAE AS1131C-2002 | 2002-02-01(R 2018) | English | Air and Air/Surface (Platform) Cargo Pallet Nets |
| 124 | SAE ARP5486-2002 | 2002-02-01(R 2013) | English | Air Cargo Pallets - Utilization Guidelines |
| 125 | SAE ARP688A-2002 | 2002-02-01(R 2012) | English | Reusable Lock for Spanner Nuts |
| 126 | SAE AS1066B-2002 | 2002-02-01(R 2012) | English | (R) Minimum Standards for Valve, High Pressure Oxygen, Cylinder Shut Off, Manually Operated |
| 127 | SAE AIR1389A-2002 | 2002-02-01(R 2012) | English | (R) Regulatory Requirements Covering the Use of Breathing Oxygen in Aircraft |
| 128 | SAE AS1131C-2002 | 2002-02-01(R 2012) | English | Air and Air/Surface (Platform) Cargo Pallet Nets |
| 129 | SAE AIR5109-2002 | 2002-02-01(R 2012) | English | Applications of Probabilistic Methods |
| 130 | SAE ARP1420B-2002 | 2002-02-01(R 2011) | English | Gas Turbine Engine Inlet Flow Distortion Guidelines
DoD Adopted |
| 131 | SAE ARP1876B-2002 | 2002-02-01(R 2011) | English | Weldability Test for Weld Filler Metal Wire |
| 132 | SAE AS85352-2002 | 2002-02-01(R 2011) | English | Inflator Assembly and Gage Elements, Pneumatic Pressure, Remote Control, Direct Reading |
| 133 | SAE AS25438-2002 | 2002-02-01(R 2009) | English | TERMINAL-LUG, CRIMP STYLE, RIGHT ANGLE TYPE, FOR ALUMINUM AIRCRAFT WIRE, CLASS 1 |
| 134 | SAE AS25472-2002 | 2002-02-01(R 2009) | English | GAGE, IN-SERVICE-INSPECTION, FOR USE WITH MS25442 CRIMPING DIES (FOR USE WITH ALUMINUM WIRE TERMINALS) |
| 135 | SAE AS25442-2002 | 2002-02-01(R 2009) | English | DIES, FOR MS25441, HYDRAULIC CRIMPING, TOOL (FOR USE WITH ALUMINUM WIRE TERMINALS) |
| 136 | SAE AS17845-2002 | 2002-02-01(R 2009) | English | SHIELD FOR USE WITH MS90362 EXTERNAL POWER RECEPTACLES
DoD Adopted |
| 137 | SAE AS5394-2002 | 2002-02-01(R 2008) | English | Health and Usage Monitoring System Advanced Multipoint Interface Specification |
| 138 | SAE AIR4174-2002 | 2002-02-01(R 2008) | English | A Guide to Aircraft Power Train Monitoring |
| 139 | SAE AMS1535C-2002 | 2002-02-01(R 2008) | English | Cleaner, Transparent Plastic
DoD Adopted |
| 140 | SAE AS8039A-2002 | 2002-02-01(R 2008) | English | Minimum Performance Standard General Aviation Flight Recorder |
| 141 | SAE AS6370-2002 | 2002-02-01(R 2008) | English | Wire, Electrical, Insulated, Antenna
DoD Adopted |
| 142 | SAE ARP5486-2002 | 2002-02-01(R 2008) | English | Air Cargo Pallets - Utilization Guidelines |
| 143 | SAE AS85352/2-2002 | 2002-02-01(R 2007) | English | INFLATOR ASSEMBLY REMOTE CONTROLLER ASSEMBLY |
| 144 | SAE AS85352/3-2002 | 2002-02-01(R 2007) | English | INFLATOR ASSEMBLY GAGE ELEMENTS |
| 145 | SAE AS85376-2002 | 2002-02-01(R 2007) | English | Stand, Shipboard, Helicopter Maintenance |
| 146 | SAE AS85352/4-2002 | 2002-02-01(R 2007) | English | INFLATOR ASSEMBLY DUAL CHUCK STEM GAGE KIT |
| 147 | SAE AS85421/1-2002 | 2002-02-01(R 2007) | English | FITTING END, STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL, MALE
DoD Adopted |
| 148 | SAE AS85352/1-2002 | 2002-02-01(R 2007) | English | INFLATOR ASSEMBLY KIT |
| 149 | SAE ARP688A-2002 | 2002-02-01(R 2007) | English | Reusable Lock for Spanner Nuts |
| 150 | SAE AS1130F-2002 | 2002-02-01(R 2007) | English | Air and Air/Surface (Platform) Cargo Pallets |
| 151 | SAE AS1131C-2002 | 2002-02-01(R 2007) | English | Air and Air/Surface (Platform) Cargo Pallet Nets |
| 152 | SAE AS1066B-2002 | 2002-02-01(R 2007) | English | (R) Minimum Standards for Valve, High Pressure Oxygen, Cylinder Shut Off, Manually Operated |
| 153 | SAE ARP1876B-2002 | 2002-02-01(R 2006) | English | Weldability Test for Weld Filler Metal Wire |
| 154 | SAE AIR1389A-2002 | 2002-02-01(R 2006) | English | (R) Regulatory Requirements Covering the Use of Breathing Oxygen in Aircraft |
| 155 | SAE AS28937-2002 | 2002-02-01 | English | FUSE, LIMITER TYPE, ENCLOSED LINK,5-60 AMP, AIRCRAFT |
| 156 | SAE AS1066B-2002 | 2002-02-01 | English | (R) Minimum Standards for Valve, High Pressure Oxygen, Cylinder Shut Off, Manually Operated |
| 157 | SAE ARP5486-2002 | 2002-02-01 | English | Air Cargo Pallets - Utilization Guidelines |
| 158 | SAE ARP1308C-2002 | 2002-02-01 | English | Preferred Electrical Connectors for Aerospace Vehicles and Associated Equipment |
| 159 | SAE AS33698-2002 | 2002-02-01 | English | Insert Arrangements, Electric Connector, Shell Size 3
DoD Adopted |
| 160 | SAE J2546-2002 | 2002-02-01 | English | Model Specification Process Standard |
| 161 | SAE J1371-2002 | 2002-02-01 | English | (R) Hydraulic Excavator Swing Minimum Performance and Rating Procedure, Standard
ANSI Approved |
| 162 | SAE AS21440-2002 | 2002-02-01 | English | BEARING, ROLLER, NEEDLE, TRACK ROLLER,INTEGRAL STUD, SEALED, TYPE VIII,ANTIFRICTION, INCH
DoD Adopted |
| 163 | SAE J2539-2002 | 2002-02-01 | English | Comparison of GATS Messages to SAE ATIS Standards |
| 164 | SAE AS210041-2002 | 2002-02-01 | English | Canister, Lithium Hydroxide, Screened Ends, Friction Type Covers |
| 165 | SAE AS85421/1-2002 | 2002-02-01 | English | FITTING END, STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL, MALE |
| 166 | SAE ARP862B-2002 | 2002-02-01 | English | Skid Control Performance |
| 167 | SAE AS1066B-2002 | 2002-02-01 | English | (R) Minimum Standards for Valve, High Pressure Oxygen, Cylinder Shut Off, Manually Operated |
| 168 | SAE AS85376-2002 | 2002-02-01 | English | Stand, Shipboard, Helicopter Maintenance |
| 169 | SAE AS28938-2002 | 2002-02-01 | English | FUSE, LIMITER TYPE, ENCLOSED LINK, INTERMEDIATE RATING, AIRCRAFT |
| 170 | SAE J749-2002 | 2002-02-01 | English | (R) Drawbars-Crawler Tractor, Standard
ANSI Approved |
| 171 | SAE J733-2002 | 2002-02-01 | English | Nomenclature-Rippers and Scarifiers, Standard
ANSI Approved |
| 172 | SAE AS85848/1-2002 | 2002-02-01 | English | Sleeving, for Identification Marking, Heat Shrinkable, Polyolefin, Flexible
DoD Adopted |
| 173 | SAE AS81765/6-2002 | 2002-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable Fluoropolymer, Semi-Rigid, Crosslinked
DoD Adopted |
| 174 | SAE AS81765/4-2002 | 2002-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable Fluoroelastomer, Flexible, Crosslinked
DoD Adopted |
| 175 | SAE GEIA-OP-0002-2002 | 2002-02-01 | English | Style Manual for Standards and Other Publications of GEIA - Formerly TechAmerica GEIA-OP-0002 |
| 176 | SAE AS81765/7-2002 | 2002-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable Fluoropolymer Composite, Semi-Rigid, Crosslinked
DoD Adopted |
| 177 | SAE AMS-P-83461/1A-2002 | 2002-02-01 | English | Packing, Preformed, Petroleum Hydraulic Fluid Resistant Improved Performance at 275掳F (135掳C) Sizes and Tolerances
DoD Adopted |
| 178 | SAE ARP914B-2002 | 2002-02-01 | English | Glossary of Electrical Connection Terms |
| 179 | SAE AS81765/3-2002 | 2002-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable Silicone Rubber, Flexible, Crosslinked
DoD Adopted |
| 180 | SAE ARP1420B-2002 | 2002-02-01 | English | Gas Turbine Engine Inlet Flow Distortion Guidelines
DoD Adopted |
| 181 | SAE AS81765/2-2002 | 2002-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable Polychloroprene, Flexible, Crosslinked
DoD Adopted |
| 182 | SAE J2395-2002 | 2002-02-01 | English | ITS In-Vehicle Message Priority |
| 183 | SAE AS85848/2-2002 | 2002-02-01 | English | Sleeving, for Identification Marking, Heat Shrinkable, Polyvinylidene Fluoride, Flexible
DoD Adopted |
| 184 | SAE J1329-2002 | 2002-02-01 | English | Minimum Performance Criteria for Braking Systems for Specialized Rubber-Tired, Self- Propelled Underground Mining Machines, Recommended Practice;
ANSI Approved |
| 185 | SAE AS81765/1-2002 | 2002-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable Polyolefin, Crosslinked Semi-Rigid and Flexible
DoD Adopted |
| 186 | SAE J667-2002 | 2002-02-01 | English | Brake Test Code - Inertia Dynamometer, Recommended Practice |
| 187 | SAE AS81765-2002 | 2002-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable, General Specification For
DoD Adopted |
| 188 | SAE AS81366A-2002 | 2002-02-01 | English | Boundary Layer Control System; Pressure |
| 189 | SAE AS21004-2002 | 2002-02-01 | English | 400 Commonwealth Drive, Warrendale, PA 15096-0001 SHEET 1 OF 3 AS21004 TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1 FOR 175掳C TOTAL CONDUCTOR TEMPERATURE
DoD Adopted |
| 190 | SAE AMS4999-2002 | 2002-02-01 | English | Titanium Alloy Laser Deposited Products 6Al - 4V Annealed |
| 191 | SAE AIR5109-2002 | 2002-02-01 | English | Applications of Probabilistic Methods |
| 192 | SAE AMS5877B-2002 | 2002-01-01(R 2018) | English | Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05La - 0.20N Solution Heat Treated - UNS R30556 |
| 193 | SAE AMS5961A-2002 | 2002-01-01(R 2018) | English | Nickel Alloy, Corrosion and Heat-Resistant, Wire 74Ni - 15.5Cr - 8.0Fe Cold Reduced, Spring Temper - UNS N06600 |
| 194 | SAE AMS5642K-2002 | 2002-01-01(R 2013) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 10.5Ni - 0.60Cb Free-Machining, Solution Heat Treated - UNS S34720 Type 1; UNS S34723 Type 2(DoD Adopted) |
| 195 | SAE AMS5500E-2002 | 2002-01-01(R 2012) | English | Steel, Corrosion-Resistant, Laminated, Sheet Surface Bonded - UNS S30200 |
| 196 | SAE AMS5537H-2002 | 2002-01-01(R 2012) | English | Cobalt Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 52Co - 20Cr - 10Ni - 15W Solution Heat Treated - UNS R30605 |
| 197 | SAE AMS5797D-2002 | 2002-01-01(R 2012) | English | Cobalt Alloy, Corrosion and Heat-Resistant, Covered Welding Electrodes 51.5Co - 20Cr - 10Ni - 15W - UNS W73605 |
| 198 | SAE AMS5768K-2002 | 2002-01-01(R 2012) | English | Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N - 31Fe Solution and Precipitation Heat Treated - UNS R30155 |
| 199 | SAE AMS5875C-2002 | 2002-01-01(R 2012) | English | Cobalt Alloy, Corrosion and Heat-Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated, Cold Rolled, and Aged Vacuum Induction Plus Vacuum Consumable Electrode Melted - UNS S30003 |
| 200 | SAE AMS5504M-2002 | 2002-01-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 12.5Cr (SAE 51410) Annealed - UNS S41000
DoD Adopted |
| 201 | SAE AMS5687M-2002 | 2002-01-01(R 2012) | English | Nickel Alloy, Corrosion and Heat-Resistant, Wire 74Ni - 15.5Cr - 8.0Fe Annealed - UNS N06600
DoD Adopted |
| 202 | SAE AMS5697F-2002 | 2002-01-01(R 2012) | English | Steel, Corrosion-Resistant, Wire 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated - UNS S30400
DoD Adopted |
| 203 | SAE AMS5961A-2002 | 2002-01-01(R 2012) | English | Nickel Alloy, Corrosion and Heat-Resistant, Wire 74Ni - 15.5Cr - 8.0Fe Cold Reduced, Spring Temper - UNS N06600 |
| 204 | SAE AMS3117-2002 | 2002-01-01(R 2011) | English | Primer Zinc Molybdate |
| 205 | SAE ARP1923A-2002 | 2002-01-01(R 2011) | English | Qualification and Certification of Etch Inspectors
DoD Adopted |
| 206 | SAE AMS4195C-2002 | 2002-01-01(R 2010) | English | Aluminum Alloy Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-T861 Flat Sheet; 1-1/2% Alclad 2024-T861 Plate) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
| 207 | SAE J374-2002 | 2002-01-01(R 2009) | English | Vehicle Roof Strength Test Procedure |
| 208 | SAE AS1677C-2002 | 2002-01-01(R 2008) | English | General Requirements for Noncertified Cargo/Baggage Containers |
| 209 | SAE J1119-2002 | 2002-01-01(R 2008) | English | Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) |
| 210 | SAE AMS5642K-2002 | 2002-01-01(R 2006) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 10.5Ni - 0.60Cb Free-Machining, Solution Heat Treated - UNS S34720 Type 1; UNS S34723 Type 2
DoD Adopted |
| 211 | SAE ARP1923A-2002 | 2002-01-01(R 2006) | English | Qualification and Certification of Etch Inspectors
DoD Adopted |
| 212 | SAE AMS5537H-2002 | 2002-01-01(R 2006) | English | Cobalt Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 52Co - 20Cr - 10Ni - 15W Solution Heat Treated - UNS R30605
DoD Adopted |
| 213 | SAE AMS5797D-2002 | 2002-01-01(R 2006) | English | Cobalt Alloy, Corrosion and Heat-Resistant, Covered Welding Electrodes 51.5Co - 20Cr - 10Ni - 15W - UNS W73605 |
| 214 | SAE AMS4778H-2002 | 2002-01-01(R 2006) | English | Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 掳F Solidus-Liquidus Range - UNS N99630
DoD Adopted |
| 215 | SAE AMS5500E-2002 | 2002-01-01(R 2006) | English | Steel, Corrosion-Resistant, Laminated, Sheet Surface Bonded - UNS S30200 |
| 216 | SAE AMS5592E-2002 | 2002-01-01(R 2006) | English | Iron-Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 44Fe - 18.5Cr - 35Ni - 1.15Si Solution Heat Treated - UNS N08330
DoD Adopted |
| 217 | SAE AMS5504M-2002 | 2002-01-01(R 2006) | English | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 12.5Cr (SAE 51410) Annealed - UNS S41000
DoD Adopted |
| 218 | SAE AMS5607E-2002 | 2002-01-01(R 2006) | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 73Ni - 7.0Cr - 16.5Mo Solution Heat Treated - UNS N10003 |
| 219 | SAE AMS5687M-2002 | 2002-01-01(R 2006) | English | Nickel Alloy, Corrosion and Heat-Resistant, Wire 74Ni - 15.5Cr - 8.0Fe Annealed - UNS N06600
DoD Adopted |
| 220 | SAE AMS5223F-2002 | 2002-01-01(R 2006) | English | Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 10% Reduction - UNS N09902
DoD Adopted |
| 221 | SAE AMS6425B-2002 | 2002-01-01(R 2006) | English | Steel, Bars, Forgings, and Tubing 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C) Consumable Electrode Vacuum Melted - UNS K32550
DoD Adopted |
| 222 | SAE AMS6417F-2002 | 2002-01-01(R 2006) | English | Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C) Consumable Electrode Vacuum Remelted
DoD Adopted |
| 223 | SAE AMS2762B-2002 | 2002-01-01(R 2006) | English | Carburizing Carbon and Low-Alloy Steel Parts
DoD Adopted |
| 224 | SAE AMS5629E-2002 | 2002-01-01(R 2006) | English | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable - UNS S13800
DoD Adopted |
| 225 | SAE AMS5628F-2002 | 2002-01-01(R 2006) | English | Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Tubing 16Cr - 2.5Ni (SAE 51431) - UNS S43100 |
| 226 | SAE AMS5961A-2002 | 2002-01-01(R 2006) | English | Nickel Alloy, Corrosion and Heat-Resistant, Wire 74Ni - 15.5Cr - 8.0Fe Cold Reduced, Spring Temper - UNS N06600 |
| 227 | SAE AMS5697F-2002 | 2002-01-01(R 2006) | English | Steel, Corrosion-Resistant, Wire 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated - UNS S30400
DoD Adopted |
| 228 | SAE AMS5768K-2002 | 2002-01-01(R 2006) | English | Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N - 31Fe Solution and Precipitation Heat Treated - UNS R30155
DoD Adopted |
| 229 | SAE AMS5875C-2002 | 2002-01-01(R 2006) | English | Cobalt Alloy, Corrosion and Heat-Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated, Cold Rolled, and Aged Vacuum Induction Plus Vacuum Consumable Electrode Melted - UNS S30003 |
| 230 | SAE AMS3117-2002 | 2002-01-01(R 2006) | English | Primer Zinc Molybdate |
| 231 | SAE AMS5877B-2002 | 2002-01-01(R 2006) | English | Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05La - 0.20N Solution Heat Treated - UNS R30556 |
| 232 | SAE MAM2201A-2002 | 2002-01-01(R 1994) | English | Tolerances, Metric Aluminum and Aluminum Alloy Bar, Rod, Wire, and Forging Stock Rolled, Drawn, or Cold Finished |
| 233 | SAE AMS5331G-2002 | 2002-01-01 | English | Steel, Sand, Castings, 0.82Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340) Normalized and Tempered - UNS J24060
DoD Adopted |
| 234 | SAE J1707-2002 | 2002-01-01 | English | Service Maintenance of SAE J1703 and J1704 Brake Fluids in Motor Vehicle Brake Systems |
| 235 | SAE AMS-S-18729A-2002 | 2002-01-01 | English | Steel Plate, Sheet, and Strip, Alloy 4130, Aircraft Quality |
| 236 | SAE AMS1452B-2002 | 2002-01-01 | English | Disinfectant, Aircraft, General Purpose |
| 237 | SAE AMS-S-5626A-2002 | 2002-01-01 | English | Steel: Chrome-Molybdenum (4140) Bars, Rods, and Forging Stock (For Aircraft Applications) |
| 238 | SAE AMS6256C-2002 | 2002-01-01 | English | Steel Bars, Forgings, and Tubing 1.0Cr - 3.0Ni - 4.5Mo - 0.08Al - 0.38V (0.10 - 0.16C) Premium Aircraft-Quality, Double Vacuum Melted ) |
| 239 | SAE J1918-2002 | 2002-01-01 | English | (R) Method for the Determination of Expansion and Water Absorption of Automotive Sealers |
| 240 | SAE AMS5877B-2002 | 2002-01-01 | English | Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05La - 0.20N Solution Heat Treated - UNS R30556 |
| 241 | SAE HS-1738-2002 | 2002-01-01 | English | SAE Electrical Standard for Industrial Machinery - Supplement to NFPA 79 - ***To Purchase: Contact IHS at 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide*** |
| 242 | SAE J180-2002 | 2002-01-01 | English | (R) Electrical Charging Systems for Off Highway Work Machines
DoD Adopted |
| 243 | SAE J2540-3-2002 | 2002-01-01 | English | National Names Phrase List |
| 244 | SAE MS1011-2002 | 2002-01-01 | English | Lubricants, Industrial Oils and Related Products - Type X (Greases) - Specification |
| 245 | SAE AMS5628F-2002 | 2002-01-01 | English | Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Tubing 16Cr - 2.5Ni (SAE 51431) - UNS S43100 |
| 246 | SAE AMS5607E-2002 | 2002-01-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 73Ni - 7.0Cr - 16.5Mo Solution Heat Treated - UNS N10003 |
| 247 | SAE JA1012-2002 | 2002-01-01 | English | A Guide to the Reliability-Centered Maintenance (RCM) Standard |
| 248 | SAE ARP1201C-2001 | 2001-12-01(R 2013) | English | Tolerances, Hexagon Bar, Machined Flat and Forged Wrenching Flat Sizes for Fluid Fittings |
| 249 | SAE ARP5824-2001 | 2001-12-01(R 2013) | English | Recommended Solid Film Lubricants for Fluid System Components |
| 250 | SAE AIR1904B-2001 | 2001-12-01(R 2012) | English | Tire Spray Suppression - Airplane Design and Consideration for |
| 251 | SAE AIR825/1-2001 | 2001-12-01(R 2011) | English | Introduction to Oxygen Equipment for Aircraft |
| 252 | SAE AS7413-2001 | 2001-12-01(R 2011) | English | Coupling Assemblies, Quick Disconnect, Automatic Shutoff
DoD Adopted |
| 253 | SAE ARP4256A-2001 | 2001-12-01(R 2008) | English | Design Objectives for Liquid Crystal Displays for Part 25 (Transport) Aircraft |
| 254 | SAE AS5134A-2001 | 2001-12-01(R 2007) | English | Aviation Distress Signal |
| 255 | SAE ARP5824-2001 | 2001-12-01(R 2007) | English | Recommended Solid Film Lubricants for Fluid System Components |
| 256 | SAE ARP147E-2001 | 2001-12-01(R 2007) | English | (R) Environmental Control Systems Terminology |
| 257 | SAE AIR5273-2001 | 2001-12-01(R 2007) | English | Actuation System Failure Detection Methods |
| 258 | SAE AS6055-2001 | 2001-12-01(R 2006) | English | Drum, Metal Reusable, Shipping and Storage (Cap. from 88 to 510 Cubic Inches) |
| 259 | SAE AS24347-2001 | 2001-12-01(R 2006) | English | Drums, Metal, Reusable Shipping and Storage |
| 260 | SAE AS9450A-2001 | 2001-12-01(R 2006) | English | R) SCREW, MACHINE - STEEL, DIFFUSED NICKELCADMIUM PLATED, HEXAGON HEAD, DRILLED, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A
DoD Adopted |
| 261 | SAE AIR1904B-2001 | 2001-12-01(R 2006) | English | Tire Spray Suppression - Airplane Design and Consideration for |
| 262 | SAE J858-2001 | 2001-12-01(R 2006) | English | Electrical Terminals Blade Type
DoD Adopted |
| 263 | SAE AS9516A-2001 | 2001-12-01(R 2006) | English | (R) SCREW, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1380-40 UNJF-3A
DoD Adopted |
| 264 | SAE AS9882A-2001 | 2001-12-01(R 2006) | English | R) NUT, PLAIN, HEXAGON - DRILLED, CADMIUM PLATED - UNS G87400, 125 KSI MIN
DoD Adopted |
| 265 | SAE AS9517A-2001 | 2001-12-01(R 2006) | English | (R) SCREW, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1640-36 UNJF-3A - FSC 5305
DoD Adopted |
| 266 | SAE AS9881A-2001 | 2001-12-01(R 2006) | English | (R) NUT, PLAIN, HEXAGON, CADMIUM PLATED, UNS G87400, 125 KSI MIN
DoD Adopted |
| 267 | SAE AMS4784F-2001 | 2001-12-01(R 2006) | English | Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 50Au - 25Pd - 25Ni 2015 to 2050 掳F (1102 to 1121 掳C) Solidus-Liquidus Range - UNS P00500
DoD Adopted |
| 268 | SAE AS7413-2001 | 2001-12-01(R 2005) | English | Coupling Assemblies, Quick Disconnect, Automatic Shutoff
DoD Adopted |
| 269 | SAE ARP1201C-2001 | 2001-12-01(R 2005) | English | (R) Tolerances, Hexagon Bar, Machined Flat and Forged Wrenching Flat Sizes for Fluid Fittings |
| 270 | SAE T-103-2001 | 2001-12-01 | English | Electric steering A revolution in steering technology - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 271 | SAE AIR1174B-2001 | 2001-12-01 | English | Index of Starting System Specifications and Standards |
| 272 | SAE AIR825/1-2001 | 2001-12-01 | English | Introduction to Oxygen Equipment for Aircraft |
| 273 | SAE J1760-2001 | 2001-12-01 | English | Data Security Services |
| 274 | SAE J2590-2001 | 2001-12-01 | English | PMODE for In-Vehicle Networks |
| 275 | SAE R-415-2001 | 2001-12-01 | English | Plastics Application Technology for Safe and Lightweight Automobiles - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 276 | SAE ARP147E-2001 | 2001-12-01 | English | (R) Environmental Control Systems Terminology |
| 277 | SAE J2014-2001 | 2001-12-01 | English | (R) Pneumatic Tires for Military Tactical Wheeled Vehicles
DoD Adopted | ANSI Approved |
| 278 | SAE J2031-2001 | 2001-12-01 | English | High Tension Ignition Cable |
| 279 | SAE AS9881B-2001 | 2001-12-01 | English | (R) NUT, PLAIN, HEXAGON, CADMIUM PLATED, UNS G87400, 125 KSI MIN(DoD Adopted) |
| 280 | SAE ARP147E-2001 | 2001-12-01 | English | (R) Environmental Control Systems Terminology |
| 281 | SAE J1494-2001 | 2001-12-01 | English | (R) Battery Booster Cables
ANSI Approved |
| 282 | SAE AIR1904B-2001 | 2001-12-01 | English | Tire Spray Suppression - Airplane Design and Consideration for |
| 283 | SAE AIR825/1-2001 | 2001-12-01 | English | Introduction to Oxygen Equipment for Aircraft |
| 284 | SAE AS24347-2001 | 2001-12-01 | English | DRUMS, METAL, REUSABLE SHIPPING AND STORAGE |
| 285 | SAE AS6055-2001 | 2001-12-01 | English | Drum, Metal Reusable, Shipping and Storage (Cap. from 88 to 510 Cubic Inches) |
| 286 | SAE J2561-2001 | 2001-12-01 | English | Bluetooth Wireless Protocol for Automotive Applications |
| 287 | SAE AIR825/1-2001 | 2001-12-01 | English | Introduction to Oxygen Equipment for Aircraft |
| 288 | SAE AMS5828G-2001 | 2001-11-01(R 2018) | English | Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.1Ti - 1.4Al - 0.006B Vacuum Induction Melted, Solution Heat Treated - UNS N07001 |
| 289 | SAE AMS4289-2001 | 2001-11-01(R 2013) | English | Aluminum Alloy Castings 7.0Si - 0.55Mg - 0.12Ti (F357.0-T6) Solution and Precipitation Heat Treated |
| 290 | SAE ARP868C-2001 | 2001-11-01(R 2013) | English | Method-Pressure Drop Tests for Fuel System Components |
| 291 | SAE AMS5613R-2001 | 2001-11-01(R 2013) | English | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 12.5Cr (SAE 51410) Annealed - UNS S41000 |
| 292 | SAE AMS5614E-2001 | 2001-11-01(R 2013) | English | Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings 12Cr - 0.50Mo Annealed - UNS S41025 |
| 293 | SAE AMS5914A-2001 | 2001-11-01(R 2012) | English | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted Precision Cold Rolled, Solution Heat Treated - UNS N07719 |
| 294 | SAE AMS5505E-2001 | 2001-11-01(R 2012) | English | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 12Cr (SAE 51410 Modified) Ferrite Controlled, Annealed - UNS S41000
DoD Adopted |
| 295 | SAE AS9358A-2001 | 2001-11-01(R 2012) | English | NUT, PLAIN, CASTELLATED, HEXAGON - UNS S66286, 130 KSI MIN |
| 296 | SAE AMS5674E-2001 | 2001-11-01(R 2012) | English | Steel, Corrosion and Heat Resistant, Wire 18Cr - 11.5Ni - 0.70Cb (SAE 30347) Solution Heat Treated - UNS S34700
DoD Adopted |
| 297 | SAE AMS5689F-2001 | 2001-11-01(R 2012) | English | Steel, Corrosion and Heat Resistant, Wire 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated - UNS S32100
DoD Adopted |
| 298 | SAE AMS5506F-2001 | 2001-11-01(R 2012) | English | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 13Cr (0.30 - 0.40C) (SAE 51420) Annealed - UNS S42000
DoD Adopted |
| 299 | SAE ARP1234B-2001 | 2001-11-01(R 2012) | English | Gland Design, Elastomeric O-Ring Seals, Static Axial, Without Back-Up Rings |
| 300 | SAE AMS5859D-2001 | 2001-11-01(R 2012) | English | Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr - 6.5Ni - 0.75Mo - 0.30Cb - 1.5Cu Consumable Electrode Melted, Solution Heat Treated Precipitation Hardenable - UNS S45000 |
| 301 | SAE AMS5819A-2001 | 2001-11-01(R 2012) | English | Cobalt Alloy, Corrosion and Heat Resistant, Hardfacing Rod and Wire 62Co - 27Cr - 2.9Ni - 5.5Mo - UNS R30021 |
| 302 | SAE AMS6342J-2001 | 2001-11-01(R 2011) | English | Steel Bars, Forgings, and Tubing 0.80Cr - 1.0Ni - 0.25Mo (0.38 - 0.43C) (SAE 9840) - G98400 |
| 303 | SAE AMS7304E-2001 | 2001-11-01(R 2011) | English | Springs, Steel 0.85 - 1.05C Hardened and Tempered After Forming - UNS G10950 |
| 304 | SAE AMS7719D-2001 | 2001-11-01(R 2011) | English | Nickel-Iron Alloy, Magnetic, Sheet and Strip 50Ni - 50Fe Stamping Quality, Half-Hard Temper - UNS K95000
DoD Adopted |
| 305 | SAE AMS4507H-2001 | 2001-11-01(R 2010) | English | Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30Zn Half Hard (H02) - UNS C26000
DoD Adopted |
| 306 | SAE AMS4288-2001 | 2001-11-01(R 2010) | English | Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti (E357.0-T6) Solution and Precipitation Heat Treated |
| 307 | SAE AMS5655E-2001 | 2001-11-01(R 2010) | English | Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V (0.20-0.25C) Hardened and Tempered - UNS S42200
DoD Adopted |
| 308 | SAE J20-2-2001 | 2001-11-01(R 2009) | English | Coolant Hose鈥擭ormal Service Type Convoluted, Wire Support Hose
DoD Adopted |
| 309 | SAE AMS5914A-2001 | 2001-11-01(R 2007) | English | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted Precision Cold Rolled, Solution Heat Treated - Composition similar to UNS N07719
DoD Adopted |
| 310 | SAE ARP868C-2001 | 2001-11-01(R 2007) | English | Method-Pressure Drop Tests for Fuel System Components
DoD Adopted |
| 311 | SAE ARP4102/9A-2001 | 2001-11-01(R 2007) | English | Flight Management System (FMS) |
| 312 | SAE AMS5614E-2001 | 2001-11-01(R 2006) | English | Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings 12Cr - 0.50Mo Annealed - UNS S41025
DoD Adopted |
| 313 | SAE AS92001A-2001 | 2001-11-01(R 2006) | English | (R) Nut, Hexagon, Drilled, Boss Connection, Aluminum - UNS A92014 - FSC 5310; UNS A92014
DoD Adopted |
| 314 | SAE AMS5859D-2001 | 2001-11-01(R 2006) | English | Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr - 6.5Ni - 0.75Mo - 0.30Cb - 1.5Cu Consumable Electrode Melted, Solution Heat Treated Precipitation Hardenable - UNS S45000 |
| 315 | SAE AMS5613R-2001 | 2001-11-01(R 2006) | English | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 12.5Cr (SAE 51410) Annealed - UNS S41000
DoD Adopted |
| 316 | SAE AMS7304E-2001 | 2001-11-01(R 2006) | English | Springs, Steel 0.85 - 1.05C Hardened and Tempered After Forming - UNS G10950 |
| 317 | SAE AMS5505E-2001 | 2001-11-01(R 2006) | English | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 12Cr (SAE 51410 Modified) Ferrite Controlled, Annealed - UNS S41000
DoD Adopted |
| 318 | SAE AMS5811C-2001 | 2001-11-01(R 2006) | English | Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 30Ni - 1.2Mo - 2.2Ti - 0.25Al - 0.001B - 0.030V (0.01 - 0.03C) Vacuum Induction Melted, Environment Controlled Packaging |
| 319 | SAE AMS5805G-2001 | 2001-11-01(R 2006) | English | Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V Vacuum Induction Melted, Environment Controlled Packaging - UNS S66286
DoD Adopted |
| 320 | SAE AMS6342J-2001 | 2001-11-01(R 2006) | English | Steel Bars, Forgings, and Tubing 0.80Cr - 1.0Ni - 0.25Mo (0.38 - 0.43C) (SAE 9840) - G98400 |
| 321 | SAE AS9358A-2001 | 2001-11-01(R 2006) | English | (R) Nut, Plain, Castellated, Hexagon - UNS S66286, 130 ksi min - UNS S66286
DoD Adopted |
| 322 | SAE AMS5689F-2001 | 2001-11-01(R 2006) | English | Steel, Corrosion and Heat Resistant, Wire 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated - UNS S32100
DoD Adopted |
| 323 | SAE AMS7719D-2001 | 2001-11-01(R 2006) | English | Nickel-Iron Alloy, Magnetic, Sheet and Strip 50Ni - 50Fe Stamping Quality - UNS K95000
DoD Adopted |
| 324 | SAE AMS5674E-2001 | 2001-11-01(R 2006) | English | Steel, Corrosion and Heat Resistant, Wire 18Cr - 11.5Ni - 0.70Cb (SAE 30347) Solution Heat Treated - UNS S34700
DoD Adopted |
| 325 | SAE AMS5604E-2001 | 2001-11-01(R 2006) | English | Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution Heat Treated, Precipitation Hardenable - UNS S17400
DoD Adopted |
| 326 | SAE AMS5506F-2001 | 2001-11-01(R 2006) | English | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 13Cr (0.30 - 0.40C) (SAE 51420) Annealed - UNS S42000
DoD Adopted |
| 327 | SAE AMS5828G-2001 | 2001-11-01(R 2006) | English | Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.1Ti - 1.4Al - 0.006B Vacuum Induction Melted, Solution Heat Treated - UNS N07001
DoD Adopted |
| 328 | SAE AMS5823E-2001 | 2001-11-01(R 2006) | English | Steel, Corrosion and Heat Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V - UNS S41780
DoD Adopted |
| 329 | SAE AMS5819A-2001 | 2001-11-01(R 2006) | English | Cobalt Alloy, Corrosion and Heat Resistant, Hardfacing Rod and Wire 62Co - 27Cr - 2.9Ni - 5.5Mo - UNS R30021
DoD Adopted |
| 330 | SAE AMS5818A-2001 | 2001-11-01(R 2006) | English | Steel, Corrosion and Heat Resistant, Welding Wire 9.0Mn - 20Cr - 6.2Ni - 0.20N |
| 331 | SAE AMS2429C-2001 | 2001-11-01(R 2006) | English | Plating, Bronze Nitriding Stop-Off 90Cu - 10Sn |
| 332 | SAE AMS5553F-2001 | 2001-11-01(R 2006) | English | Nickel, Sheet and Strip Low (0.02 Max) Carbon Annealed - UNS N02201
DoD Adopted |
| 333 | SAE AMS4289-2001 | 2001-11-01(R 2006) | English | Aluminum Alloy Castings 7.0Si - 0.55Mg - 0.12Ti (F357.0-T6) and Precipitation Heat Treated |
| 334 | SAE ARP1234B-2001 | 2001-11-01(R 2006) | English | Gland Design, Elastomeric O-Ring Seals, Static Axial, Without Back-Up Rings |
| 335 | SAE AS5389-2001 | 2001-11-01(R 2005) | English | Pallet Lift Truck and Container Fork Pocket Interface |
| 336 | SAE AS5389-2001 | 2001-11-01 | English | Pallet Lift Truck and Container Fork Pocket Interface |
| 337 | SAE AMS5819A-2001 | 2001-11-01 | English | Cobalt Alloy, Corrosion and Heat Resistant, Hardfacing Rod and Wire 62Co - 27 Cr - 2.9Ni - 5.5Mo - UNS R30021 |
| 338 | SAE AMS2625E-2001 | 2001-11-01 | English | Pressure Testing, Hydraulic 2500 psi |
| 339 | SAE AMS4288-2001 | 2001-11-01 | English | Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti (E357.0-T6) Solution and Precipitation Heat Treated |
| 340 | SAE AMS2620E-2001 | 2001-11-01 | English | Pressure Testing, Hydraulic 1000 psi |
| 341 | SAE AMS4507H-2001 | 2001-11-01 | English | Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30Zn Half Hard (H02) - UNS C26000 |
| 342 | SAE AMS2616E-2001 | 2001-11-01 | English | Pressure Testing, Hydraulic 200 psi |
| 343 | SAE MAM2625C-2001 | 2001-11-01 | English | Pressure Testing, Hydraulic 17.5 MPa |
| 344 | SAE AMS5823E-2001 | 2001-11-01 | English | Steel, Corrosion and Heat Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V - UNS S41780 |
| 345 | SAE AMS4176C-2001 | 2001-11-01 | English | Honeycomb Core, Aluminum Alloy for Sandwich Construction 5056, 350 (175) |
| 346 | SAE AMS4175C-2001 | 2001-11-01 | English | Honeycomb Core, Aluminum Alloy for Sandwich Construction 5052, 350 (175) |
| 347 | SAE AMS5828G-2001 | 2001-11-01 | English | Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.1Ti - 1.4Al - 0.006B Vacuum Induction Melted, Solution Heat Treated - UNS N07001 |
| 348 | SAE MAM2620C-2001 | 2001-11-01 | English | Pressure Testing, Hydraulic 6895 kPa |
| 349 | SAE MAM2615B-2001 | 2001-11-01 | English | Pressure Testing, Hydraulic Pressure as Specified, Metric |
| 350 | SAE AMS3168-2001 | 2001-11-01 | English | Aqueous Cleaners for Cleaning Prior to Application of Sealing Compounds |
| 351 | SAE J2366-2-2001 | 2001-11-01 | English | Link Layer |
| 352 | SAE AMS4102G-2001 | 2001-11-01 | English | Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold-Finished 99.0Al (1100-F) as Fabricated - UNS A91100 |
| 353 | SAE J2366-1-2001 | 2001-11-01 | English | ITS Data Bus - IDB-C Physical Layer |
| 354 | SAE MAM2616C-2001 | 2001-11-01 | English | Pressure Testing, Hydraulic 1380 kPa |
| 355 | SAE J2366-1L-2001 | 2001-11-01 | English | ITS Data Bus - Low Impedance Stereo Audio (LISA) |
| 356 | SAE MAP1753A-2001 | 2001-10-01(R 2012) | English | Hole Sizes, Recommended for Metric Fasteners on Propulsion Equipment |
| 357 | SAE MA1520A-2001 | 2001-10-01(R 2012) | English | Areas for Calculating Stress or Load Values for Metric MJ Externally Threaded Fasteners |
| 358 | SAE ARP843A-2001 | 2001-10-01(R 2012) | English | Chip Detector, Electrical Connection, Remote Indicating |
| 359 | SAE ARP573D-2001 | 2001-10-01(R 2012) | English | Silver, Copper and Nickel Alloy Brazed Joints for Aerospace Propulsion Systems |
| 360 | SAE ARP510A-2001 | 2001-10-01(R 2012) | English | Moment Weight of Turbine and Compressor Rotor Blades |
| 361 | SAE ARP246C-2001 | 2001-10-01(R 2012) | English | Orientation of Engine Axis, Coordinate and Numbering Systems for Aircraft Gas Turbine Engines |
| 362 | SAE ARP1232B-2001 | 2001-10-01(R 2012) | English | Gland Design, Elastomeric O-Ring Seals, Static Radial |
| 363 | SAE AS176C-2001 | 2001-10-01(R 2012) | English | Limits, Table of Limits and Lubrication Charts |
| 364 | SAE ARP1231A-2001 | 2001-10-01(R 2012) | English | Gland Design, Elastomeric O-Ring Seals, General Considerations |
| 365 | SAE AS177B-2001 | 2001-10-01(R 2012) | English | Operating Instructions for Aircraft Engines (Preparation of) |
| 366 | SAE ARP1107B-2001 | 2001-10-01(R 2012) | English | Tail Bumpers for Piloted Aircraft |
| 367 | SAE AIR1069A-2001 | 2001-10-01(R 2012) | English | Crew Oxygen Requirements Up to a Maximum Altitude of 45,000 Ft |
| 368 | SAE AIR1754A-2001 | 2001-10-01(R 2012) | English | Washer, Thermal Compensating, Metric Series |
| 369 | SAE ARP1233A-2001 | 2001-10-01(R 2012) | English | Gland Design, Elastomeric O-Ring Seals, Dynamic Radial, 1500 psi Max |
| 370 | SAE AS686B-2001 | 2001-10-01(R 2012) | English | Piloted Ring Seal Tube Swivel Connection Assembly |
| 371 | SAE ARP1515A-2001 | 2001-10-01(R 2012) | English | Threaded Fastener Protrusion Through Self-Locking Nuts |
| 372 | SAE MA1696A-2001 | 2001-10-01(R 2012) | English | Screw Threads, Metric Buttress - MJB Profile |
| 373 | SAE AS871B-2001 | 2001-10-01(R 2012) | English | Manufacturing and Inspection Standards for Preformed Packings (O-Rings) |
| 374 | SAE AIR809A-2001 | 2001-10-01(R 2012) | English | Metal Dimensional Change with Temperature |
| 375 | SAE ARP1902A-2001 | 2001-10-01(R 2012) | English | Bolt, Tee Head, Interface Surface, Dimensions for |
| 376 | SAE AMS7717D-2001 | 2001-10-01(R 2011) | English | Nickel-Iron Alloy, Magnetic, Sheet and Strip 50Ni - 50Fe Annealed, Forming Grade - UNS K95000 |
| 377 | SAE AS264E-2001 | 2001-10-01(R 2011) | English | Instrument and Cockpit Lighting for Commercial Transport Aircraft |
| 378 | SAE AMS4335-2001 | 2001-10-01(R 2011) | English | Forgings, Aluminum Alloys 2xxx and 7xxx, Heat-Treated, Finished-Part Properties: Short-Transverse Tensile Properties and Fracture Toughness |
| 379 | SAE ARP493A-2001 | 2001-10-01(R 2011) | English | Knobs, Control Aircraft, Recommended Design |
| 380 | SAE AMS5080J-2001 | 2001-10-01(R 2011) | English | Steel, Bars, Forgings, and Tubing 0.31 - 0.38C (SAE 1035) - UNS G10350
DoD Adopted |
| 381 | SAE AMS7312G-2001 | 2001-10-01(R 2011) | English | Piston Rings, Centrifugally-Cast Iron |
| 382 | SAE AMS5075F-2001 | 2001-10-01(R 2011) | English | Steel Tubing, Seamless 0.22 - 0.28C (SAE 1025) Cold Drawn and Stress Relieved - UNS G10250
DoD Adopted |
| 383 | SAE AMS6378F-2001 | 2001-10-01(R 2010) | English | Steel Bars 1.0Cr - 0.20Mo - 0.45Se (0.39 - 0.48C) (4142H Modified) Die-Drawn, 130 ksi (896 MPa) Yield Strength Free Machining - UNS K11542
DoD Adopted |
| 384 | SAE AMS5835C-2001 | 2001-10-01(R 2010) | English | Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 72Ni - 3.2Mn - 20Cr - 2.5Cb - 0.48Ti Vacuum Induction Melted, Environment Controlled Packaging - UNS N06082 |
| 385 | SAE AMS5593F-2001 | 2001-10-01(R 2010) | English | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe Solution Heat Treated - UNS N06333
DoD Adopted |
| 386 | SAE AMS6365J-2001 | 2001-10-01(R 2010) | English | Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) Normalized or Stress Relieved - UNS G41350
DoD Adopted |
| 387 | SAE J1855-2001 | 2001-10-01(R 2010) | English | Deployment of Electrically Activated Automotive Air Bags for Automobile Reclamation |
| 388 | SAE AS5498-2001 | 2001-10-01(R 2009) | English | Minimum Operational Performance Specification for Inflight Icing Detection Systems |
| 389 | SAE AS439A-2001 | 2001-10-01(R 2008) | English | Stall Warning Instrument (Turbine Powered Subsonic Aircraft) |
| 390 | SAE ARP416A-2001 | 2001-10-01(R 2008) | English | Directional Indicating System (Turbine Powered Subsonic Aircraft) |
| 391 | SAE ARP419A-2001 | 2001-10-01(R 2008) | English | Automatic Pilot Installations |
| 392 | SAE AMS5623C-2001 | 2001-10-01(R 2008) | English | Steel Bars and Forgings, High Expansion 9.5Ni - 5.5Mn (0.55 - 0.65C) Annealed - UNS K91456 |
| 393 | SAE AIR1069A-2001 | 2001-10-01(R 2007) | English | Crew Oxygen Requirements Up to a Maximum Altitude of 45,000 Ft. |
| 394 | SAE J2234-2001 | 2001-10-01(R 2007) | English | Equivalent Temperature鈥擳ruck and Bus |
| 395 | SAE AIR1551A-2001 | 2001-10-01(R 2006) | English | Torque Tightening Metric Screw Threaded Fasteners |
| 396 | SAE AMS5672C-2001 | 2001-10-01(R 2006) | English | Steel Wire, Corrosion Resistant 11.8Cr - 8.5Ni - 0.30(Cb + Ta) - 1.1Ti - 2.0Cu Precipitation Hardenable, Spring Temper - UNS45500 |
| 397 | SAE AS90708-2001 | 2001-10-01(R 2006) | English | Ring, Retaining, External, Interlocking |
| 398 | SAE ARP246C-2001 | 2001-10-01(R 2006) | English | Orientation of Engine Axis, Coordinate and Numbering Systems for Aircraft Gas Turbine Engines |
| 399 | SAE AMS7717D-2001 | 2001-10-01(R 2006) | English | Nickel-Iron Alloy, Magnetic, Sheet and Strip 50Ni - 50Fe Annealed, Forming Grade - UNS K95000
DoD Adopted |
| 400 | SAE MA1696A-2001 | 2001-10-01(R 2006) | English | Screw Threads, Metric Buttress - MJB Profile |
| 401 | SAE AS177B-2001 | 2001-10-01(R 2006) | English | Operating Instructions for Aircraft Engines (Preparation of) |
| 402 | SAE ARP1515A-2001 | 2001-10-01(R 2006) | English | Threaded Fastener Protrusion Through Self-Locking Nuts |
| 403 | SAE AS176C-2001 | 2001-10-01(R 2006) | English | Limits, Table of Limits and Lubrication Charts |
| 404 | SAE AS683C-2001 | 2001-10-01(R 2006) | English | Installation Procedures and Torques for Fluid Connections
DoD Adopted |
| 405 | SAE AMS5075F-2001 | 2001-10-01(R 2006) | English | Steel Tubing, Seamless 0.22 - 0.28C (SAE 1025) Cold Drawn and Stress Relieved - UNS G10250
DoD Adopted |
| 406 | SAE AMS5080J-2001 | 2001-10-01(R 2006) | English | Steel, Bars, Forgings, and Tubing 0.31 - 0.38C (SAE 1035) - UNS G10350
DoD Adopted |
| 407 | SAE AS686B-2001 | 2001-10-01(R 2006) | English | Piloted Ring Seal Tube Swivel Connection Assembly
DoD Adopted |
| 408 | SAE ARP843A-2001 | 2001-10-01(R 2006) | English | Chip Detector, Electrical Connection, Remote Indicating |
| 409 | SAE ARP1902A-2001 | 2001-10-01(R 2006) | English | Bolt, Tee Head, Interface Surface, Dimensions for
DoD Adopted |
| 410 | SAE AMS5637G-2001 | 2001-10-01(R 2006) | English | Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 125 ksi (862 MPa) Tensile Strength - UNS S30200
DoD Adopted |
| 411 | SAE ARP573D-2001 | 2001-10-01(R 2006) | English | Silver, Copper and Nickel Alloy Brazed Joints for Aerospace Propulsion Systems |
| 412 | SAE AIR809A-2001 | 2001-10-01(R 2006) | English | Metal Dimensional Change with Temperature |
| 413 | SAE AS7251B-2001 | 2001-10-01(R 2006) | English | Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 Degrees F Use, UNJ Thread Form
DoD Adopted |
| 414 | SAE ARP510A-2001 | 2001-10-01(R 2006) | English | Moment Weight of Turbine and Compressor Rotor Blades |
| 415 | SAE AS871B-2001 | 2001-10-01(R 2006) | English | Manufacturing and Inspection Standards for Preformed Packings (O-Rings)
DoD Adopted |
| 416 | SAE MA1520A-2001 | 2001-10-01(R 2006) | English | Areas for Calculating Stress or Load Values for Metric MJ Externally Threaded Fasteners
DoD Adopted |
| 417 | SAE AMS4335-2001 | 2001-10-01(R 2006) | English | Forgings, Aluminum Alloys 2xxx and 7xxx, Heat-Treated, Finished-Part Properties: Short-Transverse Tensile Properties and Fracture Toughness |
| 418 | SAE ARP1232B-2001 | 2001-10-01(R 2006) | English | Gland Design, Elastomeric O-Ring Seals, Static Radial |
| 419 | SAE AS3411A-2001 | 2001-10-01(R 2006) | English | Bolt, Tee Head - AMS 5662, Chamfered, .3125-24UNJF-3A (Stress Rupture Resistant) |
| 420 | SAE AMS5384E-2001 | 2001-10-01(R 2006) | English | Alloy Castings, Investment, Corrosion and Heat Resistant 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Heat Treated - UNS N07500
DoD Adopted |
| 421 | SAE ARP1107B-2001 | 2001-10-01(R 2006) | English | Tail Bumpers for Piloted Aircraft |
| 422 | SAE AMS7445D-2001 | 2001-10-01(R 2006) | English | Balls, Steel, Corrosion-Resistant 17Cr Annealed - UNS S44002, S44003, S44004
DoD Adopted |
| 423 | SAE ARP1233A-2001 | 2001-10-01(R 2006) | English | Gland Design, Elastomeric O-Ring Seals, Dynamic Radial, 1500 psi Max |
| 424 | SAE AS3232A-2001 | 2001-10-01(R 2006) | English | Bolt, Tee Head - AMS 5708, Chamfered, .1900-32 UNJF-3A
DoD Adopted |
| 425 | SAE AIR1754A-2001 | 2001-10-01(R 2006) | English | Washer, Thermal Compensating, Metric Series |
| 426 | SAE AS13572-2001 | 2001-10-01(R 2006) | English | Springs, Helical, Compression and Extension
DoD Adopted |
| 427 | SAE ARP1231A-2001 | 2001-10-01(R 2006) | English | Gland Design, Elastomeric O-Ring Seals, General Considerations |
| 428 | SAE AS7253B-2001 | 2001-10-01(R 2006) | English | Nuts, Self-Locking, Nickel Alloy, UNS N07001 Classification: 180 ksi/1400 Degrees F Procurement Specification
DoD Adopted |
| 429 | SAE AS4393B-2001 | 2001-10-01(R 2006) | English | Nut, Self-Locking, UNS S66286, 1200 Degrees F, 160 000 psi, UNJ Thread
DoD Adopted |
| 430 | SAE MAP1753A-2001 | 2001-10-01(R 2006) | English | Hole Sizes, Recommended for Metric Fasteners on Propulsion Equipment
DoD Adopted |
| 431 | SAE AS264E-2001 | 2001-10-01(R 2004) | English | Instrument and Cockpit Lighting for Commercial Transport Aircraft |
| 432 | SAE ARP493A-2001 | 2001-10-01(R 2004) | English | Knobs, Control Aircraft, Recommended Design |
| 433 | SAE AMS4632E-2001 | 2001-10-01(R 1999) | English | Aluminum Bronze Bars and Rods 90Cu - 8.5Al Hard |
| 434 | SAE AMS5852D-2001 | 2001-10-01 | English | Nickel Alloy, Corrosion and Heat Resistant, Billets and Preforms 55Ni - 15Cr - 17Co - 5.0Mo - 3.5Ti - 0.025B Powder Metallurgy Product, Hot Isostatically Pressed |
| 435 | SAE AMS6520D-2001 | 2001-10-01 | English | Steel, Maraging, Sheet, Strip, and Plate 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Melted, Solution Heat Treated - UNS K92890; Reaffirmed Non-current February 2006
DoD Adopted |
| 436 | SAE AMS2815X-2001 | 2001-10-01 | English | Identification Welding Wire Line Code System |
| 437 | SAE AMS6426E-2001 | 2001-10-01 | English | Steel Bars, Forgings, and Tubing 0.75Si - 1.0Cr - 0.58Mo (0.80 - 0.90C) Consumable Electrode Vacuum Melted - UNS K18597; Reaffirmed Non-current February 2006
DoD Adopted |
| 438 | SAE AMS5781D-2001 | 2001-10-01 | English | Steel Welding Electrodes, Covered, Corrosion and Moderate Heat Resistant 15.5Cr - 4.5Ni - 2.9Mo - 0.10N |
| 439 | SAE ARP5366-2001 | 2001-10-01 | English | Autopilot, Flight Director, and Autothrust Systems |
| 440 | SAE AMS7312G-2001 | 2001-10-01 | English | Piston Rings, Centrifugally-Cast Iron - Reaffirmed Non-current February 2006 |
| 441 | SAE ARP5366-2001 | 2001-10-01 | English | Autopilot, Flight Director, and Autothrust Systems |
| 442 | SAE AS871B-2001 | 2001-10-01 | English | Manufacturing and Inspection Standards for Preformed Packings (O-Rings) |
| 443 | SAE AS3412A-2001 | 2001-10-01 | English | Bolt, Tee Head - AMS 5662, Chamfered, .375- 24UNJF-3A (Stress Rupture Resistant) |
| 444 | SAE AS3410A-2001 | 2001-10-01 | English | Bolt, Tee Head - AMS 5662, Chamfered, .250-28UNJF-3A (Stress Rupture Resistant) |
| 445 | SAE ARP5497-2001 | 2001-10-01 | English | Modification or Replacement of Components on Dynamically Certified Seat Systems |
| 446 | SAE AMS-C-83231A-2001 | 2001-10-01 | English | Coatings, Polyurethane, Rain Erosion Resistant for Exterior Aircraft and Missile Plastic Parts
DoD Adopted |
| 447 | SAE AMS-C-83445A-2001 | 2001-10-01 | English | Coating System, Polyurethane, Nonyellowing, White, Rain Erosion Resistant, Thermally Reflective
DoD Adopted |
| 448 | SAE AMS4266A-2001 | 2001-10-01 | English | Aluminum Alloy, Sheet 6.5Fe - 1.3Si - 0.60V (8022-H112) Powder Metallurgy Product, Strain Hardened - UNS 98022; Reaffirmed Noncurrent April 2006 |
| 449 | SAE AMS7464C-2001 | 2001-10-01 | English | Bolts and Screws, Steel, Low-Alloy Heat-Resistant 220,000 psi (1517 MPa) Tensile Strength Hardened and Tempered, Roll Threaded - Reaffirmed Non-current February 2006 |
| 450 | SAE ARP4868-2001 | 2001-10-01 | English | Application Programming Interface Requirements for the Presentation of Gas Turbine Engine Performance on Digital Computers |
| 451 | SAE AS9003-2001 | 2001-10-01 | English | Inspection and Test Quality System |
| 452 | SAE AS9103-2001 | 2001-10-01 | English | Variation Management of Key Characteristics |
| 453 | SAE AMS5335F-2001 | 2001-10-01 | English | Steel Castings, Sand 0.65Cr - 0.75Ni - 0.20Mo (0.25 - 0.33C) (SAE 8630 Modified) Normalized and Tempered |
| 454 | SAE J1361-2001 | 2001-10-01 | English | Hot Plate Method for Evaluating Heat Resistance and Thermal Insulation Properties of Materials |
| 455 | SAE J24714-2001 | 2001-10-01 | English | Fluid Systems - Connector Tubes - General Specification and Part Standard
DoD Adopted |
| 456 | SAE J160-2001 | 2001-10-01 | English | (R) Dimensional Stability of Friction Materials When Exposed to Elevated Temperatures
DoD Adopted |
| 457 | SAE J2238-2001 | 2001-10-01 | English | Airbag Inflator Ballistic Tank Test Procedure Gas Generators Used in Inflatable Restraint Systems |
| 458 | SAE AMS7724C-2001 | 2001-10-01 | English | Alloy Sheet and Strip, Sintered Wire Mesh, Corrosion and Heat Resistant 30Fe - 1.5Mn - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb +Ta) - 0.15N Porous - Reaffirmed Non-current April 2006; UNS R30100 |
| 459 | SAE AS7115-2001 | 2001-10-01 | English | National Aerospace and Defense Contractors Accreditation Program Requirements for Elastomer Seals |
| 460 | SAE AS1709A-2001 | 2001-09-01(R 2014) | English | Coupling Assembly, Hydraulic Self Sealing, Quick Disconnect |
| 461 | SAE AS1227C-2001 | 2001-09-01(R 2013) | English | Hose Assembly, Convoluted Polytetrafluoroethylene, Metallic Reinforced, Low Pressure, Up to 400 °F, Aircraft |
| 462 | SAE J1608-2001 | 2001-09-01(R 2012) | English | Manual Transmission Shift Patterns |
| 463 | SAE AMS5070H-2001 | 2001-09-01(R 2011) | English | Steel, Bars and Forgings 0.18 - 0.23C (SAE 1022) - UNS G10220 |
| 464 | SAE AMS5036H-2001 | 2001-09-01(R 2011) | English | Steel Sheet and Strip, Aluminum Coated Low Carbon
DoD Adopted |
| 465 | SAE ARP433A-2001 | 2001-09-01(R 2008) | English | Liquid Oxygen Quantity Instruments |
| 466 | SAE AS1227C-2001 | 2001-09-01(R 2007) | English | (R) Hose Assembly, Convoluted Polytetrafluoroethylene, Metallic Reinforced, Low Pressure, Up to 400 Degrees F, Aircraft
DoD Adopted |
| 467 | SAE AMS5070H-2001 | 2001-09-01(R 2006) | English | Steel, Bars and Forgings 0.18 - 0.23C (SAE 1022) - UNS G10220 |
| 468 | SAE AS1709A-2001 | 2001-09-01(R 2005) | English | Coupling Assembly, Hydraulic Self Sealing, Quick Disconnect |
| 469 | SAE ARP5605-2001 | 2001-09-01 | English | Solid Composite Laminate NDI Reference Standards |
| 470 | SAE AMS-R-6130A-2001 | 2001-09-01 | English | Rubber, Cellular, Chemically Blown |
| 471 | SAE ARP5606-2001 | 2001-09-01 | English | Composite Honeycomb NDI Reference Standards |
| 472 | SAE J1953-2001 | 2001-09-01 | English | Brake-Stroke Indicator Design Guideline for Cam or Disc Air-Brake Actuators
ANSI Approved |
| 473 | SAE AMS5036H-2001 | 2001-09-01 | English | Steel Sheet and Strip, Aluminum Coated Low Carbon - Reaffirmed Non-current February 2006
DoD Adopted |
| 474 | SAE R-272-2001 | 2001-09-01 | English | World History of the Automobile - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 475 | SAE R-241-2001 | 2001-08-15 | English | R-2800 Pratt & Whitneys Dependable Masterpiece - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 476 | SAE AS24335-2001 | 2001-08-01(R 2013) | English | FLANGE, BULKHEAD MOUNTING, HYDRAULIC SELF-SEALING COUPLING |
| 477 | SAE AIR5426-2001 | 2001-08-01(R 2013) | English | Fitting and Fitting Assembly Selection, Installation, Inspection and Maintenance of |
| 478 | SAE AS9362A-2001 | 2001-08-01(R 2012) | English | NUT, PLAIN, HEXAGON, CHECK - UNS S66286, 130 KSI MIN, SILVER PLATED |
| 479 | SAE AMS5050K-2001 | 2001-08-01(R 2011) | English | Steel Tubing, Seamless 0.15 Carbon, Maximum Annealed - UNS G10100
DoD Adopted |
| 480 | SAE AMS3126C-2001 | 2001-08-01(R 2008) | English | Aluminum Coating Material, Corrosion and Heat Resistant Thermosetting, Inorganic Binder |
| 481 | SAE AIR5401-2001 | 2001-08-01(R 2007) | English | Aircraft Crash Axes |
| 482 | SAE AS4799A-2001 | 2001-08-01(R 2007) | English | (R) Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to Straight Female |
| 483 | SAE J2473-2001 | 2001-08-01(R 2007) | English | Self-Propelled Sweepers and Scrubbers鈥擬aximum Gradient Rating During Hopper Discharge |
| 484 | SAE AIR1168/2-2001 | 2001-08-01(R 2007) | English | Heat and Mass Transfer and Air-Water Mixtures |
| 485 | SAE AMS5357B-2001 | 2001-08-01(R 2006) | English | Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated, Precipitation Hardenable - UNS J92110
DoD Adopted |
| 486 | SAE J1699-1-2001 | 2001-08-01(R 2006) | English | SAE J1850 Verification Test Procedures |
| 487 | SAE J2605-2001 | 2001-08-01(R 2006) | English | Non-Contact Hose Measurement Study 1 |
| 488 | SAE J1037-2001 | 2001-08-01(R 2006) | English | Windshield Washer Tubing |
| 489 | SAE J2057-2-2001 | 2001-08-01(R 2006) | English | Class A Multiplexing Actuators |
| 490 | SAE AMS5050K-2001 | 2001-08-01(R 2006) | English | Steel Tubing, Seamless 0.15 Carbon, Maximum Annealed - UNS G10100
DoD Adopted |
| 491 | SAE AS9362A-2001 | 2001-08-01(R 2006) | English | (R) NUT, PLAIN, HEXAGON, CHECK - UNS S66286, 130 KSI MIN, SILVER PLATED
DoD Adopted |
| 492 | SAE AS24335-2001 | 2001-08-01(R 2005) | English | Flange, Bulkhead Mounting, Hydraulic Self-Sealing Coupling |
| 493 | SAE AIR5426-2001 | 2001-08-01(R 2005) | English | Fitting and Fitting Assembly Selection, Installation, Inspection and Maintenance of |
| 494 | SAE AMS6266H-2001 | 2001-08-01(R 1992) | English | Steel Bars, Forgings, and Tubing 0.50Cr - 1.82Ni - 0.25Mo - 0.003B - 0.06V (0.08 - 0.13C) (43BV12) |
| 495 | SAE R-286-2001 | 2001-08-01 | English | The E-M-F Company The Story of Automotive Pioneers Barney Everitt, William Metzger, and Walter Flanders - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 496 | SAE AMS7265C-2001 | 2001-08-01 | English | Rings, Sealing, Ethylene Propylene (EPM) Rubber Phosphate Ester Hydraulic Fluid Resistant 75 - 85 |
| 497 | SAE AMS7262C-2001 | 2001-08-01 | English | Rings, Sealing, Ethylene Propylene (EPM) Rubber Phosphate Ester Hydraulic Fluid Resistant 58 - 95 |
| 498 | SAE AMS7261D-2001 | 2001-08-01 | English | Rings, Sealing, Phosphonitrilic (FZ) Fluoroelastomer High- Temperature-Fluid Resistant |
| 499 | SAE AMS7261/3E-2001 | 2001-08-01 | English | Rings, Sealing, Phosphonitrilic (FX) Fluoroelastomer High-Temperature-Fluid Resistant 85-95 |
| 500 | SAE AMS7261/2F-2001 | 2001-08-01 | English | Rings, Sealing, Phosphonitrilic (FX) Fluoroelastomer High-Temperature-Fluid Resistant 75-85 |
|