| Pos | standard Number | publication date | Language | Description |
| 1 | SAE MAM4247B-2003 | 2003-03-01 | English | Aluminum Alloy, Hand Forgings 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T7352) Solution Heat Treated, Stress Relieved by Compression, and Precipitation Heat Treated - UNS A97049 |
| 2 | SAE MAM4209B-2003 | 2003-03-01 | English | Aluminum Alloy Sheet, Alclad 6.0Cu - 0.40Zr (2004-F) As Rolled - UNS A82004 |
| 3 | SAE MAM4208B-2003 | 2003-03-01 | English | Aluminum Alloy Sheet 6.0Cu - 0.40Zr (2004-F) As Rolled - UNS A92004 |
| 4 | SAE MAM4141B-2003 | 2003-03-01 | English | Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated - UNS A97075 |
| 5 | SAE MAM4131B-2003 | 2003-03-01 | English | Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged |
| 6 | SAE ARP5595-2003 | 2003-03-01 | English | Cargo Restraint Straps - Utilization Guidelines |
| 7 | SAE MAM5914A-2003 | 2003-03-01 | English | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50AI - 18Fe Consumable Electrode or Vacuum induction Melted Precision Cold Rolled, Solution Heat Treated |
| 8 | SAE MAM5822B-2003 | 2003-03-01 | English | Steel, Corrosion and Heat Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction Melted - UNS S41780
DoD Adopted |
| 9 | SAE AS1624A-2003 | 2003-03-01 | English | HOSE, POLYTETRAFLUOROETHYLENE (TFE), LIGHTWEIGHT 3,000 PSI, HIGH TEMPERATURE, HYDRAULIC AND PNEUMATIC - FSC 4730 |
| 10 | SAE J/ISO 6746-1-2003 | 2003-03-01 | English | Earth-moving machinery Definitions of dimensions and symbols Part 1: Base machine - This document is no longer maintained by SAE |
| 11 | SAE AIR5926-2003 | 2003-03-01 | English | White Paper to Support Supersession of MIL-S-8879C With AS8879C |
| 12 | SAE ARP1395B-2003 | 2003-03-01 | English | Minimum Requirements for Future Wide-Body Aircraft Cargo Systems and Compartments (Intermodal) |
| 13 | SAE AS9101B-2003 | 2003-03-01 | English | Quality Management Systems Assessment - Remains Current |
| 14 | SAE AS1722A-2003 | 2003-03-01 | English | HOSE, POLYTETRAFLUOROETHYLENE (TFE) LIGHTWEIGHT HIGH TEMPERATURE AND HIGH PRESSURE (3000 PSIG) WITH INTEGRAL FIRE PROTECTION |
| 15 | SAE AMS3092-2003 | 2003-03-01 | English | Release Agent, for Use During Form-In-Place Gasket Preparation |
| 16 | SAE J192-2003 | 2003-03-01 | English | (R) Maximum Exterior Sound Level for Snowmobiles |
| 17 | SAE ARP5364-2003 | 2003-03-01 | English | Human Factor Considerations in the Design of Multifunction Display Systems for Civil Aircraft |
| 18 | SAE T-114-2003 | 2003-02-14 | English | Fuel Cell Powered Vehicles Automotive Technology of the Future-Update - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 19 | SAE AS1895/4D-2003 | 2003-02-01(R 2015) | English | COUPLING, V-RETAINER, SINGLE LATCH, TYPE II LOW PROFILE(DoD Adopted) |
| 20 | SAE AS1912C-2003 | 2003-02-01(R 2015) | English | (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, 45° TO 45°(DoD Adopted) |
| 21 | SAE AS1910C-2003 | 2003-02-01(R 2015) | English | (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, STRAIGHT TO 45°(DoD Adopted) |
| 22 | SAE AS1909C-2003 | 2003-02-01(R 2015) | English | (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, LIGHTWEIGH T, BEAM SEAL, STRAIGHT TO STRAIGHT(DoD Adopted) |
| 23 | SAE AS1911C-2003 | 2003-02-01(R 2015) | English | (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, STRAIGHT TO 90°(DoD Adopted) |
| 24 | SAE AS1913C-2003 | 2003-02-01(R 2015) | English | (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, 45° TO 90°(DoD Adopted) |
| 25 | SAE AS1914C-2003 | 2003-02-01(R 2015) | English | (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, 90° TO 90°(DoD Adopted) |
| 26 | SAE AS5419-2003 | 2003-02-01(R 2014) | English | Cable, Thermocouple Extension, Shielded and Unshielded |
| 27 | SAE AS5419/2-2003 | 2003-02-01(R 2014) | English | WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, ABRASION RESISTANT, EXTRUDED PTFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION MEDIUM WEIGHT, 260 °C |
| 28 | SAE AS5419/7-2003 | 2003-02-01(R 2014) | English | WIRE, THERMOCOUPLE, FP/POLYIMIDE/FP INSULATED, NICKEL/ CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, NORMAL WEIGHT, 260 °C |
| 29 | SAE AS5419/4-2003 | 2003-02-01(R 2014) | English | WIRE, THERMOCOUPLE, CROSSLINKED POLYALKENE INSULATED NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 150 °C |
| 30 | SAE AS5419/6-2003 | 2003-02-01(R 2014) | English | WIRE, THERMOCOUPLE, FP/POLYIMIDE/FP INSULATED, NICKEL/ CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 260 °C |
| 31 | SAE AS5419/1-2003 | 2003-02-01(R 2014) | English | WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 °C |
| 32 | SAE AS1895/20B-2003 | 2003-02-01(R 2013) | English | COUPLING, V-RETAINER, DOUBLE LATCH, TYPE II LOW PROFILE |
| 33 | SAE AS1895/22B-2003 | 2003-02-01(R 2013) | English | COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE |
| 34 | SAE AS5229-2003 | 2003-02-01(R 2013) | English | PORT, INTERNAL STRAIGHT THREAD, AIR CONNECTION, DESIGN STANDARD |
| 35 | SAE AS4831A-2003 | 2003-02-01(R 2009) | English | Software Interfaces for Ground-Based Monitoring Systems |
| 36 | SAE AS5419/3-2003 | 2003-02-01(R 2008) | English | WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, EXTRUDED TFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 DEGREE C |
| 37 | SAE AS5419/5-2003 | 2003-02-01(R 2008) | English | WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN), THERMOCOUPLE EXTENSION, 200 DEGREE C |
| 38 | SAE AS5419/4-2003 | 2003-02-01(R 2008) | English | WIRE, THERMOCOUPLE, CROSSLINKED POLYALENE INSULATED NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 150 DEGREE C |
| 39 | SAE AS5419/1-2003 | 2003-02-01(R 2008) | English | WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 DEGREE C |
| 40 | SAE AS5419/2-2003 | 2003-02-01(R 2008) | English | WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, ABRASION RESISTANT, EXTRUDED PTFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION MEDIUM WEIGHT, 260 DEGREE C |
| 41 | SAE AS5419/7-2003 | 2003-02-01(R 2008) | English | WIRE, THERMOCOUPLE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, NORMAL WEIGHT, 260 DEGREE C |
| 42 | SAE AS5419-2003 | 2003-02-01(R 2008) | English | Cable, Thermocouple Extension, Shielded and Unshielded |
| 43 | SAE AS5419/6-2003 | 2003-02-01(R 2008) | English | WIRE, THERMOCOUPLE, FP/POLYMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 260 DEGREE C |
| 44 | SAE AS5419/3-2003 | 2003-02-01(R 2008) | English | WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, EXTRUDED TFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 DEGREE C |
| 45 | SAE AS115F-2003 | 2003-02-01(R 2007) | English | (R) HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DEGREES F, STRAIGHT TO STRAIGHT, FLARELESS, LIGHTWEIGHT
DoD Adopted |
| 46 | SAE AS120F-2003 | 2003-02-01(R 2007) | English | HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 掳F, 90掳 TO 90掳, FLARELESS LIGHTWEIGHT
DoD Adopted |
| 47 | SAE AS119F-2003 | 2003-02-01(R 2007) | English | (R) HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 掳F, 45掳 TO 90掳, FLARELESS LIGHTWEIGHT
DoD Adopted |
| 48 | SAE AS116F-2003 | 2003-02-01(R 2007) | English | (R) HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DEGREES F, STRAIGHT TO 45 DEGREE FLARELESS, LIGHTWEIGHT
DoD Adopted |
| 49 | SAE AS118F-2003 | 2003-02-01(R 2007) | English | (R) HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DEGREES F, 45 DEGREE TO 45 DEGREE, FLARELESS, LIGHTWEIGHT
DoD Adopted |
| 50 | SAE AS117F-2003 | 2003-02-01(R 2007) | English | (R) HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DEGREES F, STRAIGHT TO 90 DEGREE, FLARELESS, LIGHTWEIGHT
DoD Adopted |
| 51 | SAE AS1910C-2003 | 2003-02-01(R 2007) | English | (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 掳F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, STRAIGHT TO 45掳
DoD Adopted |
| 52 | SAE AS1339F-2003 | 2003-02-01(R 2007) | English | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 Degrees Lightweight, Hydraulic and Pneumatic
DoD Adopted |
| 53 | SAE AS1912C-2003 | 2003-02-01(R 2007) | English | (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, 45 DEGREE TO 45 DEGREE
DoD Adopted |
| 54 | SAE AS1909C-2003 | 2003-02-01(R 2007) | English | (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, STRAIGHT TO STRAIGHT
DoD Adopted |
| 55 | SAE AS1895/22B-2003 | 2003-02-01(R 2007) | English | COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE
DoD Adopted |
| 56 | SAE AS1895/20B-2003 | 2003-02-01(R 2007) | English | COUPLING, V-RETAINER, DOUBLE LATCH, TYPE II LOW PROFILE
DoD Adopted |
| 57 | SAE AS5229-2003 | 2003-02-01(R 2007) | English | PORT, INTERNAL STRAIGHT THREAD, AIR CONNECTION, DESIGN STANDARD |
| 58 | SAE AS1895/4D-2003 | 2003-02-01(R 2007) | English | COUPLING, V-RETAINER, SINGLE LATCH, TYPE II LOW PROFILE
DoD Adopted |
| 59 | SAE AS1911C-2003 | 2003-02-01(R 2007) | English | (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, STRAIGHT TO 90 DEGREE
DoD Adopted |
| 60 | SAE AS158E-2003 | 2003-02-01(R 2007) | English | HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 掳F, 90掳 TO 90掳, FLARED, LIGHTWEIGHT
DoD Adopted |
| 61 | SAE AS1913C-2003 | 2003-02-01(R 2007) | English | (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 掳F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, 45掳 TO 90掳
DoD Adopted |
| 62 | SAE AS1914C-2003 | 2003-02-01(R 2007) | English | (R) HOSE ASSEMBLY, POLTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, 90 DEGREE TO 90 DEGREE
DoD Adopted |
| 63 | SAE AS157E-2003 | 2003-02-01(R 2007) | English | HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 掳F, 45掳 TO 90掳, FLARED, LIGHTWEIGHT
DoD Adopted |
| 64 | SAE AS156E-2003 | 2003-02-01(R 2007) | English | HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 掳F, 45掳 TO 45掳, FLARED, LIGHTWEIGHT
DoD Adopted |
| 65 | SAE AS155E-2003 | 2003-02-01(R 2007) | English | HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DEGREES F, STRAIGHT TO 90 DEGREES, FLARED, LIGHTWEIGHT
DoD Adopted |
| 66 | SAE AS154E-2003 | 2003-02-01(R 2007) | English | HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 掳F, STRAIGHT TO 45掳, FLARED, LIGHTWEIGHT
DoD Adopted |
| 67 | SAE AS153F-2003 | 2003-02-01(R 2007) | English | HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 掳F, STRAIGHT TO STRAIGHT, FLARED, LIGHTWEIGHT
DoD Adopted |
| 68 | SAE AMS-QQ-S-763B-2003 | 2003-02-01(R 2006) | English | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings
DoD Adopted |
| 69 | SAE J/ISO 10532-2003 | 2003-02-01 | English | Earth-moving machinery Machine-mounted retrieval device Performance requirements - This document is no longer maintained by SAE |
| 70 | SAE ARP1383B-2003 | 2003-02-01 | English | (R) Impulse Testing of Aerospace Hydraulic Actuators, Valves, Pressure Containers, and Similar Fluid System Components
DoD Adopted |
| 71 | SAE J/ISO 7546-2003 | 2003-02-01 | English | Earth-moving machinery Loader and front loading excavator buckets Volumetric ratings - This document is no longer maintained by SAE |
| 72 | SAE J/ISO 8813-2003 | 2003-02-01 | English | Earth-moving machinery Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom - This document is no longer maintained by SAE |
| 73 | SAE J/ISO 9246-2003 | 2003-02-01 | English | Earth-moving machinery Crawler and wheel tractor dozer blades Volumetric ratings - This document is no longer maintained by SAE |
| 74 | SAE J/ISO 9248-2003 | 2003-02-01 | English | Earth-moving machinery Units for dimensions, performance and capacities, and their measurement accuracies - This document is no longer maintained by SAE |
| 75 | SAE J/ISO 9533-2003 | 2003-02-01 | English | Earth-moving machinery Machine-mounted forward and reverse audible warning alarm Sound test method - This document is no longer maintained by SAE |
| 76 | SAE J/ISO 10261-2003 | 2003-02-01 | English | Earth-moving machinery Product identification numbering system - This document is no longer maintained by SAE |
| 77 | SAE J/ISO 10266-2003 | 2003-02-01 | English | Earth-moving machinery Determination of slope limits for machine fluid systems operation Static test method - This document is no longer maintained by SAE |
| 78 | SAE J/ISO 12117-2003 | 2003-02-01 | English | Earth-moving machinery Tip-over protection structure (TOPS) for compact excavators Laboratory tests and performance requirements - This document is no longer maintained by SAE |
| 79 | SAE J/ISO 13766-2003 | 2003-02-01 | English | Earth-moving machinery Electromagnetic compatibility - This document is no longer maintained by SAE |
| 80 | SAE J/ISO 13860-2003 | 2003-02-01 | English | Machinery for forestry Forwarders Terms, definitions and commercial specifications - This document is no longer maintained by SAE |
| 81 | SAE J/ISO 13861-2003 | 2003-02-01 | English | Machinery for forestryWheeled skiddersTerms, definitions and commercial specifications - This document is no longer maintained by SAE |
| 82 | SAE J/ISO 13862-2003 | 2003-02-01 | English | Machinery for forestry Feller-bunchers Terms, definitions and commercial specifications - This document is no longer maintained by SAE |
| 83 | SAE J/ISO 17591-2003 | 2003-02-01 | English | Machinery for forestry Knuckleboom log loaders Identification terminology, classification and component nomenclature - This document is no longer maintained by SAE |
| 84 | SAE J367-2003 | 2003-02-01 | English | Passenger Car Door System Crush Test Procedure |
| 85 | SAE J964-2003 | 2003-02-01 | English | Recommended Practice for Measuring Haze and Reflectance of Mirrors |
| 86 | SAE AS4831A-2003 | 2003-02-01 | English | Software Interfaces for Ground-Based Monitoring Systems |
| 87 | SAE J/ISO 3471-2003 | 2003-02-01 | English | Earth-moving machinery Roll-over protective structures Laboratory tests and performance requirements - This document is no longer maintained by SAE |
| 88 | SAE J/ISO 7216-2003 | 2003-02-01 | English | Acoustics Agricultural and forestry wheeled tractors and self-propelled machines Measurement of noise emitted when in motion - This document is no longer maintained by SAE |
| 89 | SAE J/ISO 3411-2003 | 2003-02-01 | English | Earth-moving machinery Human physical dimensions of operators and minimum operator space envelope - This document is no longer maintained by SAE |
| 90 | SAE HS-784-2003 | 2003-02-01 | English | Residual Stress Measurement by X-Ray Diffraction |
| 91 | SAE J/ISO 6014-2003 | 2003-02-01 | English | Earth-moving machinery Determination of ground speed - This document is no longer maintained by SAE |
| 92 | SAE J/ISO 5005-2003 | 2003-02-01 | English | Earth-moving machinery Method for locating the centre of gravity - This document is no longer maintained by SAE |
| 93 | SAE J/ISO 7464-2003 | 2003-02-01 | English | Earth-moving machinery Method of test for the measurement of drawbar pull - This document is no longer maintained by SAE |
| 94 | SAE J/ISO 6483-2003 | 2003-02-01 | English | Earth-moving machinery Dumper bodies Volumetric rating - This document is no longer maintained by SAE |
| 95 | SAE J/ISO 7457-2003 | 2003-02-01 | English | Earth-moving machinery Determination of turning dimensions of wheeled machines - This document is no longer maintained by SAE |
| 96 | SAE J/ISO 7136-2003 | 2003-02-01 | English | Earth-moving machinery Pipelayers Definitions and commercial specifications - This document is no longer maintained by SAE |
| 97 | SAE J/ISO 7096-2003 | 2003-02-01 | English | Earth-moving machinery Laboratory evaluation of operator set vibration - This document is no longer maintained by SAE |
| 98 | SAE J2020-2003 | 2003-02-01 | English | Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus |
| 99 | SAE J/ISO 6484-2003 | 2003-02-01 | English | Earth-moving machinery Elevating scrapers Volumetric ratings - This document is no longer maintained by SAE |
| 100 | SAE J/ISO 6396-2003 | 2003-02-01 | English | Acoustics Measurement at the operator鈥檚 position of noise emitted by earth-moving machinery Dynamic test conditions - This document is no longer maintained by SAE |
| 101 | SAE J/ISO 6395-2003 | 2003-02-01 | English | Acoustics Measurement of exterior noise emitted by earth-moving machinery Dynamic test conditions - This document is no longer maintained by SAE |
| 102 | SAE J/ISO 6485-2003 | 2003-02-01 | English | Earth -moving machinery Tractor -scraper volumetric rating - This document is no longer maintained by SAE |
| 103 | SAE J/ISO 6393-2003 | 2003-02-01 | English | Acoustics Measurement of exterior noise emitted by earth-moving machinery Stationary test conditions - This document is no longer maintained by SAE |
| 104 | SAE J/ISO 6682-2003 | 2003-02-01 | English | Earth-moving machinery Zones of comfort and reach for controls - This document is no longer maintained by SAE |
| 105 | SAE J/ISO 6016-2003 | 2003-02-01 | English | Earth-moving machinery Methods of measuring the masses of whole machines, their equipment and components - This document is no longer maintained by SAE |
| 106 | SAE USCAR-19-2003 | 2003-02-01 | English | COAXIAL CABLE CONNECTOR INTERFACE 鈥?SQUARE OUTER CONDUCTOR - Revision 1 |
| 107 | SAE AMS-PRF-46194A-2003 | 2003-02-01 | English | FOAM, RIGID, STRUCTURAL, CLOSED CELL |
| 108 | SAE AMS-STD-182A-2003 | 2003-02-01 | English | Continuous Identification Marking of Nickel and Nickel Base Alloys
DoD Adopted |
| 109 | SAE J2568-2003 | 2003-02-01 | English | Intrusion Resistance of Safety Glazing Systems for Road Vehicles |
| 110 | SAE AS5419/5-2003 | 2003-02-01 | English | WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN), THERMOCOUPLE EXTENSION, 200 DEGREE C |
| 111 | SAE J1282-2003 | 2003-02-01 | English | Snowmobile Brake Control Systems |
| 112 | SAE T-107-2003 | 2003-01-08 | English | Electronic Control Systems - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 113 | SAE AIR825/13-2003 | 2003-01-01(R 2018) | English | Guide for Evaluating Combustion Hazards in Aircraft Oxygen Systems |
| 114 | SAE AS1424 SUP 1A-2003 | 2003-01-01(R 2014) | English | (R) Hose Assemblies, Metal, Medium Pressure, High Temperature (Supplement 1) |
| 115 | SAE AS4395B-2003 | 2003-01-01(R 2013) | English | FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| 116 | SAE AMS4204C-2003 | 2003-01-01(R 2013) | English | Aluminum Alloy, Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7651) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated - UNS A97010 |
| 117 | SAE AMS4325-2003 | 2003-01-01(R 2013) | English | Aluminum Alloy, Extruded Wide Panel Profiles (7150-T77511) 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr Solution Heat Treated, Stress-Relieved, Straightened and Overaged - UNS A97150 |
| 118 | SAE AS4396B-2003 | 2003-01-01(R 2013) | English | FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| 119 | SAE AIR825/13-2003 | 2003-01-01(R 2013) | English | Guide for Evaluating Combustion Hazards in Aircraft Oxygen Systems |
| 120 | SAE AMS5744E-2003 | 2003-01-01(R 2013) | English | Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Heat Treated, 170 ksi (1172 MPa) Tensile Strength - UNS S35500 |
| 121 | SAE AMS5671G-2003 | 2003-01-01(R 2013) | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenable - UNS N07750 |
| 122 | SAE AMS5698G-2003 | 2003-01-01(R 2013) | English | Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe No. 1 Temper, Precipitation Hardenable - UNS N07750(DoD Adopted) |
| 123 | SAE AS38386/1A-2003 | 2003-01-01(R 2013) | English | CONNECTOR, AIR DUCT HOSE, GROUND COOLING, MALE |
| 124 | SAE AMS5511H-2003 | 2003-01-01(R 2013) | English | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.5Ni (304L) Solution Heat Treated - UNS S30403 |
| 125 | SAE AMS5699G-2003 | 2003-01-01(R 2013) | English | Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Spring Temper, Precipitation Hardenable - UNS N07750(DoD Adopted) |
| 126 | SAE AS38386/2A-2003 | 2003-01-01(R 2013) | English | CONNECTOR, AIR DUCT HOSE, GROUND COOLING, FEMALE |
| 127 | SAE AIR1810C-2003 | 2003-01-01(R 2013) | English | (R) Design, Development and Test Criteria - Solid State Proximity Switches/Systems for Landing Gear Applications |
| 128 | SAE AMS5627G-2003 | 2003-01-01(R 2013) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgins, Tubing, and Rings 17Cr (SAE 51430) Annealed - UNS S43000 |
| 129 | SAE AS1990C-2003 | 2003-01-01(R 2013) | English | Aluminum Alloy Tempers(DoD Adopted) |
| 130 | SAE AMS5962A-2003 | 2003-01-01(R 2012) | English | Nickel Alloy, Corrosion and Heat-Resistant, Round Bars and Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Treated and Work Strengthened Precipitation Hardenable - U |
| 131 | SAE AMS5651J-2003 | 2003-01-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 25Cr - 20Ni (SAE 30310) Solution Heat Treated - UNS S31008 |
| 132 | SAE AS14227B-2003 | 2003-01-01(R 2012) | English | (R) LOCK, ROD END, IMPROVED STRENGTH, NAS LUG |
| 133 | SAE AMS2437C-2003 | 2003-01-01(R 2012) | English | Coating, Plasma Spray Deposition |
| 134 | SAE AMS2478E-2003 | 2003-01-01(R 2012) | English | Anodic Treatment of Magnesium Alloys Acid Type, Full Coat |
| 135 | SAE AMS7493L-2003 | 2003-01-01(R 2012) | English | Rings, Flash Welded Ferritic and Martensitic Corrosion-Resistant Steels |
| 136 | SAE AMS2479D-2003 | 2003-01-01(R 2012) | English | Anodic Treatment of Magnesium Alloys Acid Type, Thin Coat |
| 137 | SAE AMS2476C-2003 | 2003-01-01(R 2012) | English | Electrolytic Treatment for Magnesium Alloys Alkaline Type, Full Coat |
| 138 | SAE J584-2003 | 2003-01-01(R 2010) | English | Motorcycle Headlamps |
| 139 | SAE ARP731C-2003 | 2003-01-01(R 2010) | English | (R) General Requirements for Application of Vapor Cycle Refrigeration Systems for Aircraft |
| 140 | SAE J1050-2003 | 2003-01-01(R 2009) | English | (R) Describing and Measuring the Driver's Field of View
DoD Adopted |
| 141 | SAE ARP5446-2003 | 2003-01-01(R 2008) | English | Safety Instructions for Sight-Impaired Passengers |
| 142 | SAE AIR825/13-2003 | 2003-01-01(R 2008) | English | Guide for Evaluating Combustion Hazards in Aircraft Oxygen Systems |
| 143 | SAE AIR1810C-2003 | 2003-01-01(R 2008) | English | (R) Design, Development and Test Criteria - Solid State Proximity Switches/Systems for Landing Gear Applications |
| 144 | SAE AS1424 SUP 1A-2003 | 2003-01-01(R 2007) | English | (R) Hose Assemblies, Metal, Medium Pressure, High Temperature (Supplement 1) |
| 145 | SAE AS38386/2A-2003 | 2003-01-01(R 2007) | English | (R) CONNECTOR, AIR DUCT HOSE, GROUND COOLING, FEMALE
DoD Adopted |
| 146 | SAE AMS5744E-2003 | 2003-01-01(R 2007) | English | Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Heat Treated, 170 ksi (1172 MPa) Tensile Strength - UNS S35500
DoD Adopted |
| 147 | SAE AS4396B-2003 | 2003-01-01(R 2007) | English | (R) FITTING END, BULKHEAD, FLARED TUBE CONNECTION, DESIGN STANDARD
DoD Adopted |
| 148 | SAE AS38386/1A-2003 | 2003-01-01(R 2007) | English | (R) CONNECTOR, AIR DUCT HOSE, GROUND COOLING, MALE
DoD Adopted |
| 149 | SAE AS4395B-2003 | 2003-01-01(R 2007) | English | (R) FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD
DoD Adopted |
| 150 | SAE AMS2437C-2003 | 2003-01-01(R 2007) | English | Coating, Plasma Spray Deposition |
| 151 | SAE AMS5651J-2003 | 2003-01-01(R 2007) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 25Cr - 20Ni (SAE 30310) Solution Heat Treated - UNS S31008 |
| 152 | SAE AMS2665G-2003 | 2003-01-01(R 2007) | English | Brazing, Silver For Use Up to 400 掳F (204 掳C) |
| 153 | SAE AMS7493L-2003 | 2003-01-01(R 2007) | English | Rings, Flash Welded Ferritic and Martensitic Corrosion-Resistant Steels
DoD Adopted |
| 154 | SAE J392-2003 | 2003-01-01(R 2007) | English | Motorcycle and Motor Driven Cycle Electrical System Maintenance of Design Voltage |
| 155 | SAE AMS4325-2003 | 2003-01-01(R 2007) | English | Aluminum Alloy, Extruded Wide Panel Profiles (7150-T77511) 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr Solution Heat Treated, Stress-Relieved, Straightened and Overaged - UNS A97150 |
| 156 | SAE AMS5698G-2003 | 2003-01-01(R 2007) | English | Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe No. 1 Temper, Precipitation Hardenable - UNS N07750
DoD Adopted |
| 157 | SAE AMS5766D-2003 | 2003-01-01(R 2007) | English | Alloy, Corrosion and Heat-Resistant, Bars and Forgings 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe Solution Heat Treated - UNS N08800
DoD Adopted |
| 158 | SAE AMS5966A-2003 | 2003-01-01(R 2007) | English | Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted - UNS N07263 |
| 159 | SAE AMS5962A-2003 | 2003-01-01(R 2007) | English | Nickel Alloy, Corrosion and Heat-Resistant, Round Bars and Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution Treated and Work Strengthened Precipitation Hardenable - UNS N07718
DoD Adopted |
| 160 | SAE AMS5699G-2003 | 2003-01-01(R 2007) | English | Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Spring Temper, Precipitation Hardenable - UNS N07750
DoD Adopted |
| 161 | SAE AMS5627G-2003 | 2003-01-01(R 2007) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 17Cr (SAE 51430) Annealed - UNS s43000 |
| 162 | SAE AMS4204C-2003 | 2003-01-01(R 2007) | English | Aluminum Alloy, Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7651) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated - UNS A97010
DoD Adopted |
| 163 | SAE AMS4205C-2003 | 2003-01-01(R 2007) | English | Aluminum Alloy, Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T73651) or (7010-T7451) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated - UNS 97010
DoD Adopted |
| 164 | SAE AS90991B-2003 | 2003-01-01(R 2007) | English | NUT, HEXAGON, DRILLED, BOSS CONNECTION, ALUMINUM - UNS A92024
DoD Adopted |
| 165 | SAE AMS5671G-2003 | 2003-01-01(R 2007) | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted 1800 掳F (982 掳C) Solution Heat Treated, Precipitation Hardenable - UNS N07750
DoD Adopted |
| 166 | SAE AMS2479D-2003 | 2003-01-01(R 2007) | English | Anodic Treatment of Magnesium Alloys Acid Type, Thin Coat |
| 167 | SAE AMS7732C-2003 | 2003-01-01(R 2007) | English | Steel Wire, Copper Clad, Round 99Fe - 0.32Mn Annealed
DoD Adopted |
| 168 | SAE AMS2476C-2003 | 2003-01-01(R 2007) | English | Electrolytic Treatment for Magnesium Alloys Alkaline Type, Full Coat |
| 169 | SAE AMS7733C-2003 | 2003-01-01(R 2007) | English | Steel Wire, Copper Clad, Round 99Fe - 0.45Mn (0.13C max) Annealed |
| 170 | SAE AMS5511H-2003 | 2003-01-01(R 2007) | English | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.5Ni (304L) Solution Heat Treated - UNS S30403
DoD Adopted |
| 171 | SAE AS91001B-2003 | 2003-01-01(R 2007) | English | NUT, HEXAGON, DRILLED, BOSS CONNECTION, CRES - UNS S30400
DoD Adopted |
| 172 | SAE AMS2478E-2003 | 2003-01-01(R 2007) | English | Anodic Treatment of Magnesium Alloys Acid Type, Full Coat |
| 173 | SAE AS1990C-2003 | 2003-01-01(R 2007) | English | Aluminum Alloy Tempers
DoD Adopted |
| 174 | SAE AMS-S-6098A-2003 | 2003-01-01 | English | Steel, Chrome-Nickel-Molybdenum (8735) Bars and Reforging Stock (Aircraft Quality) |
| 175 | SAE AMS-S-22141A-2003 | 2003-01-01 | English | Steel, Investment Castings Alloy and Carbon |
| 176 | SAE AIR910B-2003 | 2003-01-01 | English | (R) Ozone Problems in High Altitude Aircraft |
| 177 | SAE AMS3143A-2003 | 2003-01-01 | English | Powder Coating Materials, Epoxy |
| 178 | SAE J682-2003 | 2003-01-01 | English | Rear Wheel Splash and Stone Throw Protection
DoD Adopted |
| 179 | SAE AIR1810C-2003 | 2003-01-01 | English | (R) Design, Development, and Test Criteria - Solid State Proximity Switches/Systems for Landing Gear Applications |
| 180 | SAE J2634-2003 | 2003-01-01 | English | Scribing of Coatings in Preparation for Testing of Wheels and Wheel Trim |
| 181 | SAE AMS-S-83318A-2003 | 2003-01-01 | English | (R) Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks and Fuel Cell Cavities
DoD Adopted |
| 182 | SAE J2571-2003 | 2003-01-01 | English | Advanced Driver Interface Systems for Commercial Vehicle Operations |
| 183 | SAE J1752-2-2003 | 2003-01-01 | English | (R) Measurement of Radiated Emissions from Integrated CircuitsSurface Scan Method (Loop Probe Method) 10 MHz to 3 GHz |
| 184 | SAE AMS4997B-2003 | 2003-01-01 | English | Titanium Alloy Powder 5Al - 2Sn - 2Zr - 4Cr - 4Mo - 0.100 Premium Quality |
| 185 | SAE ARP4925A-2003 | 2003-01-01 | English | Aerospace Design and Installation of Commercial Transport Helicopter Hydraulic Systems |
| 186 | SAE AMS-STD-183A-2003 | 2003-01-01 | English | Continuous Identification Marking of Iron and Steel Products - FSC 4710 |
| 187 | SAE J2485-2003 | 2003-01-01 | English | Fastener Part Standard - Machine Screw Nuts (Metric and Inch) |
| 188 | SAE ARP5483/2-2003 | 2003-01-01 | English | Rolling Element Bearing Hardness Test |
| 189 | SAE ARP598C-2003 | 2003-01-01 | English | (R) Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems
DoD Adopted |
| 190 | SAE J1752-3-2003 | 2003-01-01 | English | (R) Measurement of Radiated Emissions from Integrated CircuitsTEM/Wideband TEM (GTEM) Cell Method; TEM Cell (150 kHz to 1 GHz), Wideband TEM Cell (150 kHz to 8 GHz) |
| 191 | SAE AMS2476C-2003 | 2003-01-01 | English | Electrolytic Treatment for Magnesium Alloys Alkaline Type, Full Coat |
| 192 | SAE ARP577D-2003 | 2003-01-01 | English | (R) Emergency Placarding - Internal and External |
| 193 | SAE HS-150-2003 | 2003-01-01 | English | Fluid Conductors and Connectors - CD ROM ***To Purchase: Contact IHS at 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide*** |
| 194 | SAE ARP1384C-2003 | 2003-01-01 | English | (R) Passenger Safety Information Briefing Cards and Video Briefings |
| 195 | SAE AMS7493L-2003 | 2003-01-01 | English | Rings, Flash Welded Ferritic and Martensitic Corrosion-Resistant Steels |
| 196 | SAE AMS2479D-2003 | 2003-01-01 | English | Anodic Treatment of Magnesium Alloys Acid Type, Thin Coat |
| 197 | SAE AMS2478E-2003 | 2003-01-01 | English | Anodic Treatment of Magnesium Alloys Acid Type, Full Coat |
| 198 | SAE J1071-2003 | 2003-01-01 | English | Operator Controls for Graders |
| 199 | SAE AS14227B-2003 | 2003-01-01 | English | (R) LOCK, ROD END, IMPROVED STRENGTH, NAS LUG
DoD Adopted |
| 200 | SAE ARP731C-2003 | 2003-01-01 | English | (R) General Requirements for Application of Vapor Cycle Refrigeration Systems for Aircraft |
| 201 | SAE AMS4908G-2003 | 2003-01-01 | English | Titanium Alloy, Sheet and Strip 8Mn Annealed, 110 ksi (758 MPa) Yield Strength - UNS R56080 |
| 202 | SAE J2634-2003 | 2003-01-01 | English | Scribing of Coatings in Preparation for Testing of Wheels and Wheel Trim |
| 203 | SAE ARP1210D-2002 | 2002-12-01(R 2013) | English | Gas Turbine Engine Interface Test Data Reduction Computer Programs - Removed per SAEs Request(DoD Adopted) |
| 204 | SAE ARP5898-2002 | 2002-12-01(R 2013) | English | Human Interface Criteria for Flight Deck Surface Operations Displays |
| 205 | SAE AMS2420D-2002 | 2002-12-01(R 2012) | English | Plating of Aluminum for Solderability Zinc Immersion Pre-Treatment Process |
| 206 | SAE AIR5490-2002 | 2002-12-01(R 2012) | English | Carbon Brake Contamination |
| 207 | SAE AMS5649G-2002 | 2002-12-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 13Ni - 2.1Mo Free Machining Solution Heat Treated - UNS J92200 |
| 208 | SAE J1452-2002 | 2002-12-01(R 2011) | English | Trailer Grade Parking Performance Test Procedure |
| 209 | SAE ARP1210D-2002 | 2002-12-01(R 2011) | English | Gas Turbine Engine Interface Test Data Reduction Computer Programs
DoD Adopted |
| 210 | SAE AMS2451/13-2002 | 2002-12-01(R 2011) | English | Plating, Brush, Silver |
| 211 | SAE AMS2451/12-2002 | 2002-12-01(R 2011) | English | Plating, Brush, Tin |
| 212 | SAE AS5393-2002 | 2002-12-01(R 2009) | English | Health and Usage Monitoring System, Blade Tracker Interface Specification |
| 213 | SAE J985-2002 | 2002-12-01(R 2009) | English | Vision Factors Considerations in Rearview Mirror Design
DoD Adopted |
| 214 | SAE ARP1210D-2002 | 2002-12-01(R 2008) | English | Gas Turbine Engine Interface Test Data Reduction Computer Programs
DoD Adopted |
| 215 | SAE ARP5991-2002 | 2002-12-01(R 2008) | English | Test Method for the Determination of Water Concentration in Polyol Ester and Diester Aerospace Lubricants by Coulometric Karl Fischer Titration |
| 216 | SAE AMS2451/13-2002 | 2002-12-01(R 2007) | English | Plating, Brush, Silver |
| 217 | SAE AMS2451/12-2002 | 2002-12-01(R 2007) | English | Plating, Brush, Tin |
| 218 | SAE AMS2667F-2002 | 2002-12-01(R 2007) | English | Brazing, Silver For Small Pressurized Fittings |
| 219 | SAE AMS2420D-2002 | 2002-12-01(R 2007) | English | Plating of Aluminum for Solderability Zinc Immersion Pre-Treatment Process
DoD Adopted |
| 220 | SAE AMS5649G-2002 | 2002-12-01(R 2007) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 13Ni - 2.1Mo Free Machining Solution Heat Treated - UNS J92200
DoD Adopted |
| 221 | SAE ARP5898-2002 | 2002-12-01(R 2007) | English | Human Interface Criteria for Flight Deck Surface Operations Displays |
| 222 | SAE AIR5490-2002 | 2002-12-01(R 2007) | English | Carbon Brake Contamination |
| 223 | SAE AS9212A-2002 | 2002-12-01(R 2007) | English | (R) BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A
DoD Adopted |
| 224 | SAE AS9217A-2002 | 2002-12-01 | English | (R) BOLT, MACHINE - STEEL, DIFFUSED NICKEL - CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .190-32 UNJF-3A
DoD Adopted |
| 225 | SAE ARP5910-2002 | 2002-12-01 | English | Ramp Markings |
| 226 | SAE ARP5911-2002 | 2002-12-01 | English | Regional Aircraft Towbarless Tow Vehicle - Test Requirements |
| 227 | SAE AS5391-2002 | 2002-12-01 | English | Health and Usage Monitoring System Accelerometer Interface Specification |
| 228 | SAE AS5392-2002 | 2002-12-01 | English | Health and Usage Monitoring System, Rotational System Indexing Sensor Specification |
| 229 | SAE MS1003-2002 | 2002-12-01 | English | Lubricants, Industrial Oils, and Related Products Type D Compressor OilsSpecification |
| 230 | SAE MAP1572A-2002 | 2002-12-01 | English | Metric Stud Holes For Aerospace Electrical & Electronic Wire Terminating Devices |
| 231 | SAE J985-2002 | 2002-12-01 | English | Vision Factors Considerations in Rearview Mirror Design |
| 232 | SAE ARP5991-2002 | 2002-12-01 | English | Test Method for the Determination of Water Concentration in Polyol Ester and Diester Aerospace Lubricants by Coulometric Karl Fischer Titration |
| 233 | SAE AS39901A-2002 | 2002-12-01 | English | (R) Bearings, Roller, Needle, Airframe, Antifriction, Inch
DoD Adopted |
| 234 | SAE AS9207A-2002 | 2002-12-01 | English | (R) SCREW, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A
DoD Adopted |
| 235 | SAE AS9209A-2002 | 2002-12-01 | English | (R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A
DoD Adopted |
| 236 | SAE AS9210A-2002 | 2002-12-01 | English | (R) BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A
DoD Adopted |
| 237 | SAE AMS3263A-2002 | 2002-12-01 | English | Sealing Compound, Polythioether, Ambient Cure or Immediate Heat Cure For Aircraft Structures, Fuel Resistant With Intermittent Use To 400 掳F (204 掳C) |
| 238 | SAE AS9216A-2002 | 2002-12-01 | English | (R) SCREW, MACHINE - STEEL, DIFFUSED NICKEL - CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A
DoD Adopted |
| 239 | SAE MAP1572A-2002 | 2002-12-01 | English | Metric Stud Holes For Aerospace Electrical & Electronic Wire Terminating Devices |
| 240 | SAE ARP5483/8-2002 | 2002-12-01 | English | Rolling Bearing Dynamic Radial Load Test |
| 241 | SAE ARP5483/7-2002 | 2002-12-01 | English | Dynamic Radial Load Test, Track Roller Bearings |
| 242 | SAE J2321-2002 | 2002-12-01 | English | Ship Systems and EquipmentGeneral Specification for Filter ElementsHydraulic and Lube Oil Service
DoD Adopted |
| 243 | SAE MAP1572A-2002 | 2002-12-01 | English | Metric Stud Holes For Aerospace Electrical and Electronic Wire Terminating Devices |
| 244 | SAE J1452-2002 | 2002-12-01 | English | Trailer Grade Parking Performance Test Procedure |
| 245 | SAE R-347-2002 | 2002-11-05 | English | Direct Injection Systems The Next Decade in Engine Technology - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 246 | SAE ARP1161A-2002 | 2002-11-01(R 2018) | English | Crew Station Lighting - Commercial Aircraft |
| 247 | SAE AMS5794E-2002 | 2002-11-01(R 2013) | English | Iron Alloy, Corrosion and Heat-Resistant, Welding Wire 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N Annealed - UNS R30155(DoD Adopted) |
| 248 | SAE AMS5738D-2002 | 2002-11-01(R 2013) | English | Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9Ni (SAE 30303F) Free Machining, High Yield Strength Solution Heat Treated and Cold Worked - UNS S30323 |
| 249 | SAE AMS5501E-2002 | 2002-11-01(R 2013) | English | Steel, Corrosion Resistant, Sheet, Strip, and Foil 19Cr - 9.5Ni (304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength - UNS S30400 |
| 250 | SAE AMS5678F-2002 | 2002-11-01(R 2013) | English | Steel, Corrosion Resistant, Wire 17Cr - 7.1Ni - 1.1Al Cold Drawn, Precipitation-Hardenable - UNS S17700(DoD Adopted) |
| 251 | SAE AIR5386-2002 | 2002-11-01(R 2013) | English | Hose and Hose Assembly Selection, Installation, Inspection and Maintenance Guidelines, Listing of |
| 252 | SAE J400-2002 | 2002-11-01(R 2012) | English | Test for Chip Resistance of Surface Coatings |
| 253 | SAE AMS5572H-2002 | 2002-11-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Seamless Tubing 25Cr - 20Ni (SAE 30310S) Solution Heat Treated - UNS S31008 |
| 254 | SAE AMS5559J-2002 | 2002-11-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Thin Wall Solution Heat Treated - UNS S32100 |
| 255 | SAE AMS5573L-2002 | 2002-11-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Seamless Tubing 17Cr - 12Ni - 2.5Mo (SAE 30316) Solution Heat Treated - UNS S31600 |
| 256 | SAE ARP1161A-2002 | 2002-11-01(R 2011) | English | Crew Station Lighting – Commercial Aircraft |
| 257 | SAE AMS5774E-2002 | 2002-11-01(R 2009) | English | Steel, Corrosion and Heat-Resistant, Welding Wire 16.5Cr - 4.5Ni - 2.9Mo - 0.10N - UNS S35080
DoD Adopted |
| 258 | SAE ARP741B-2002 | 2002-11-01(R 2008) | English | Turbofan and Turbojet Gas Turbine Engine Test Cell Correlation |
| 259 | SAE AMS5738D-2002 | 2002-11-01(R 2007) | English | Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9Ni (SAE 30303F) Free Machining, High Yield Strength Solution Heat Treated and Cold Worked - UNS S30323
DoD Adopted |
| 260 | SAE AMS5646M-2002 | 2002-11-01(R 2007) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11 Ni - 0.60Cb (SAE 30347) Solution Heat Treated - UNS S34700
DoD Adopted |
| 261 | SAE AMS5573L-2002 | 2002-11-01(R 2007) | English | Steel, Corrosion and Heat-Resistant, Seamless Tubing 17Cr - 12Ni - 2.5Mo (SAE 30316) Solution Heat Treated - UNS S31600 |
| 262 | SAE AIR5386-2002 | 2002-11-01(R 2007) | English | Hose and Hose Assembly Selection, Installation, Inspection and Maintenance Guidelines, Listing of |
| 263 | SAE AMS5711D-2002 | 2002-11-01(R 2007) | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La Solution Heat Treated - UNS N06635 |
| 264 | SAE AMS5559J-2002 | 2002-11-01(R 2007) | English | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Thin Wall Solution Heat Treated - UNS S32100
DoD Adopted |
| 265 | SAE AMS5879C-2002 | 2002-11-01(R 2007) | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Foil 62Ni - 21.5Cr - 9.0Mo - 3.7Cb Cold Rolled and Annealed - UNS N06625/N06626
DoD Adopted |
| 266 | SAE AMS5572H-2002 | 2002-11-01(R 2007) | English | Steel, Corrosion and Heat-Resistant, Seamless Tubing 25Cr - 20Ni (SAE 30310S) Solution Heat Treated - UNS S31008
DoD Adopted |
| 267 | SAE AMS5501E-2002 | 2002-11-01(R 2007) | English | Steel, Corrosion Resistant, Sheet, Strip, and Foil 19Cr - 9.5Ni (304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength - UNS S30400 |
| 268 | SAE AMS5794E-2002 | 2002-11-01(R 2007) | English | Iron Alloy, Corrosion and Heat-Resistant, Welding Wire 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N Annealed - UNS R30155
DoD Adopted |
| 269 | SAE AMS5678F-2002 | 2002-11-01(R 2007) | English | Steel, Corrosion Resistant, Wire 17Cr - 7.1Ni - 1.1Al Cold Drawn, Precipitation-Hardenable - UNS S17700
DoD Adopted |
| 270 | SAE ARP1161A-2002 | 2002-11-01(R 2004) | English | Crew Station Lighting - Commercial Aircraft |
| 271 | SAE J332-2002 | 2002-11-01 | English | Testing Machines for Measuring the Uniformity of Passenger Car and Light Truck Tires |
| 272 | SAE AS24466-2002 | 2002-11-01 | English | Bearing, Roller, Needle-Double Row, Heavy Duty, Track Roller, Type VI, Antifriction, Inch |
| 273 | SAE AS24465-2002 | 2002-11-01 | English | Bearing, Roller, Needle-Single Row, Heavy Duty, Track Roller, Type V, Antifriction, Inch |
| 274 | SAE AMS5774E-2002 | 2002-11-01 | English | Steel, Corrosion and Heat-Resistant, Welding Wire 16.5Cr - 4.5Ni - 2.9Mo - 0.10N - UNS S35080 |
| 275 | SAE AMS5572H-2002 | 2002-11-01 | English | Steel, Corrosion and Heat-Resistant, Seamless Tubing 25Cr - 20Ni (SAE 30310S) Solution Heat Treated - UNS S31008 |
| 276 | SAE J400-2002 | 2002-11-01 | English | Test for Chip Resistance of Surface Coatings |
| 277 | SAE AMS5774E-2002 | 2002-11-01 | English | Steel, Corrosion and Heat-Resistant, Welding Wire 16.5Cr - 4.5Ni - 2.9Mo - 0.10N - UNS S35080 |
| 278 | SAE ARP745A-2002 | 2002-11-01 | English | General Components Specification for Explosive Actuated Valves One Cycle |
| 279 | SAE R-327-2002 | 2002-10-25 | English | Practical Diesel-Engine Combustion Analysis - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 280 | SAE R-317-2002 | 2002-10-25 | English | Role of the Seat in Rear Crash Safety - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 281 | SAE AIR825/8-2002 | 2002-10-01(R 2012) | English | Continuous Flow Oxygen Systems |
| 282 | SAE ARP5904-2002 | 2002-10-01(R 2012) | English | Airborne Icing Tankers |
| 283 | SAE AMS3065H-2002 | 2002-10-01(R 2011) | English | Compound, Corrosion Preventive Thin Film, Fingerprint Removing |
| 284 | SAE ARP5904-2002 | 2002-10-01(R 2007) | English | Airborne Icing Tankers |
| 285 | SAE J1811-2002 | 2002-10-01(R 2007) | English | Power Cable Terminals |
| 286 | SAE AIR825/8-2002 | 2002-10-01(R 2007) | English | Continuous Flow Oxygen Systems |
| 287 | SAE AMS3065H-2002 | 2002-10-01(R 2007) | English | Compound, Corrosion Preventive Thin Film, Fingerprint Removing |
| 288 | SAE ARP4102/11C-2002 | 2002-10-01(R 2007) | English | (R) Airborne Windshear Systems |
| 289 | SAE AMS2473G-2002 | 2002-10-01(R 2007) | English | Chemical Film Treatment for Aluminum Alloys General Purpose Coating |
| 290 | SAE AMS6459D-2002 | 2002-10-01(R 2007) | English | Steel, Welding Wire 1.0Cr - 1.0Mo - 0.12V (0.18 - 0.23C) Vacuum Melted - UNS K22720
DoD Adopted |
| 291 | SAE J815-2002 | 2002-10-01(R 2007) | English | Load Deflection Testing of Urethane Foams for Automotive Seating |
| 292 | SAE J435-2002 | 2002-10-01(R 2007) | English | (R) Automotive Steel Castings |
| 293 | SAE J1908-2002 | 2002-10-01(R 2007) | English | (R) Electrical Grounding Practice |
| 294 | SAE J1256-2002 | 2002-10-01 | English | Fuel Economy Measurement - Road Test Procedure - Cold Start and Warm-Up Fuel Economy, Recommended Practice |
| 295 | SAE J111-2002 | 2002-10-01 | English | Seals - Terminology of Radial Lip |
| 296 | SAE J1936-2002 | 2002-10-01 | English | Chemical Methods for the Measurement of Nonregulated Diesel Emissions, Recommended Practice |
| 297 | SAE R-329-2002 | 2002-10-01 | English | EDSEL The Story of Henry Fords Forgotten Son - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 298 | SAE J35-2002 | 2002-10-01 | English | Diesel Smoke Measurement Procedure |
| 299 | SAE J1145-2002 | 2002-10-01 | English | (R) Emissions Terminology and Nomenclature, Recommended Practice |
| 300 | SAE J2337-3-2002 | 2002-10-01 | English | Connections for Fluid Power and High Pressure UsePorts, Stud Ends, and Plugs with ISO 261 Threads and O-Ring SealingPart 3: Port Plug Requirements, Dimensions, Design, and Test Methods |
| 301 | SAE J1003-2002 | 2002-10-01 | English | Diesel Engine Emission Measurement Procedure, Recommended Practice |
| 302 | SAE J1002-2002 | 2002-10-01 | English | (R) Seals - Evaluation of Elastohydrodynamic |
| 303 | SAE J255-2002 | 2002-10-01 | English | Diesel Engine Smoke Measurement |
| 304 | SAE J1280-2002 | 2002-10-01 | English | Determination of Sulfur Compounds in Automotive Exhaust, Information Report |
| 305 | SAE R-268-2002 | 2002-10-01 | English | Neck Iinjury The Use of X-Rays, CTs, and MRIs to Study Crash-Related Injury Mechanisms - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 306 | SAE J1291-2002 | 2002-10-01 | English | (R) Automotive Hydraulic Brake SystemMetric Banjo Bolt Connections |
| 307 | SAE J2337-2-2002 | 2002-10-01 | English | Connections for Fluid Power and High Pressure Use Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring SealingPart 2: Stud End Requirements, Dimensions, Design, and Test Methods |
| 308 | SAE J1900-2002 | 2002-10-01 | English | Seals - Bond Test Fixture and Procedure |
| 309 | SAE J2600-2002 | 2002-10-01 | English | Compressed Hydrogen Surface Vehicle Refuelling Connection Devices |
| 310 | SAE J1030-2002 | 2002-10-01 | English | Maximum Sound Level for Passenger Cars and Light Trucks, Recommended Practice |
| 311 | SAE J1113-23-2002 | 2002-10-01 | English | Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to Radiated Electromagnetic Fields, 10 kHz to 200 MHz, Strip Line Method, Recommended Practice |
| 312 | SAE J1901-2002 | 2002-10-01 | English | Lip Force Measurement - Radial Lip Seals |
| 313 | SAE J1937-2002 | 2002-10-01 | English | Engine Testing with Low-Temperature Charge Air-Cooler Systems in a Dynamometer Test Cell, Recommended Practice |
| 314 | SAE J110-2002 | 2002-10-01 | English | Seals - Testing of Radial Lip
DoD Adopted |
| 315 | SAE J1666-2002 | 2002-10-01 | English | Electric Vehicle Acceleration, Gradeability, and Deceleration Test Procedure |
| 316 | SAE AIR825/8-2002 | 2002-10-01 | English | Continuous Flow Oxygen Systems |
| 317 | SAE J780-2002 | 2002-10-01 | English | Engine Coolant Pump Seals |
| 318 | SAE J946-2002 | 2002-10-01 | English | (R) Application Guide to Radial Lip Seals |
| 319 | SAE J215-2002 | 2002-10-01 | English | Continuous Hydrocarbon Analysis of Diesel Emissions |
| 320 | SAE J1045-2002 | 2002-10-01 | English | Instrumentation and Techniques for Vehicle Refueling Emissions Measurement, Recommended Practice |
| 321 | SAE J1290-2002 | 2002-10-01 | English | (R) Automotive Hydraulic Brake System - Metric Tube Connections |
| 322 | SAE J1290-2002 | 2002-10-01 | English | Automotive Hydraulic Brake System - Metric Tube Connections |
| 323 | SAE J1954-2002 | 2002-10-01 | English | Guide to the Application and Use of Passenger Car Air- Conditioning Compressor Face Seals |
| 324 | SAE J1947-2002 | 2002-10-01 | English | O.D. Coatings for Radial Lip-Type Shaft Seals |
| 325 | SAE AIR825/8-2002 | 2002-10-01 | English | Continuous Flow Oxygen Systems |
| 326 | SAE AMS3065H-2002 | 2002-10-01 | English | Compound, Corrosion Preventive Thin Film, Fingerprint Removing |
| 327 | SAE J1243-2002 | 2002-10-01 | English | (R) Diesel Emission Production Audit Test Procedure, Recommended Practice |
| 328 | SAE J1245-2002 | 2002-10-01 | English | Guide to the Application and Use of Engine Coolant Pump Face Seals |
| 329 | SAE J2494-2-2002 | 2002-10-01 | English | Dimensional Specifications for Non-Metallic Body Push-to-Connect Fittings Used On a Vehicular Air Brake System |
| 330 | SAE J1669-2-2002 | 2002-10-01 | English | SAE Passenger Compartment Air Filter Test Code - Test Method for Gas Removing Filters |
| 331 | SAE J1669-2002 | 2002-10-01 | English | Passenger Compartment Air Filter Test Code, Recommended Practice |
| 332 | SAE J1506-2002 | 2002-10-01 | English | Emission Test Driving Schedules, Information Report; |
| 333 | SAE J1971-2002 | 2002-10-01 | English | Radial Lip Seal TorqueMeasurement Method and Results |
| 334 | SAE J177-2002 | 2002-10-01 | English | (R) Measurement of Carbon Dioxide, Carbon Monoxide, and Oxides of Nitrogen in Diesel Exhaust |
| 335 | SAE J159-2002 | 2002-10-01 | English | (R) Rated Capacity System
DoD Adopted |
| 336 | SAE AMS3065H-2002 | 2002-10-01 | English | Compound, Corrosion Preventive Thin Film, Fingerprint Removing |
| 337 | SAE AS90335-2002 | 2002-10-01 | English | CONNECTOR, RECEPTACLES, PLUGS, ADAPTOR, EL, EMBEDDED, PRINTED CIRCUIT BOARD LAMP LIGHTING PANELS |
| 338 | SAE J120-2002 | 2002-10-01 | English | Rubber Rings for Automotive Applications |
| 339 | SAE J654-2002 | 2002-10-01 | English | (R) Static and Reciprocating Elastomeric Transmission Seals |
| 340 | SAE T-100-2002 | 2002-09-15 | English | Alternative Fuels Transportation Fuels for Today and Tomorrow - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 341 | SAE AIR1667A-2002 | 2002-09-01(R 2013) | English | (R) Rotor Blade Electrothermal Ice Protection Design Considerations |
| 342 | SAE ARP1917A-2002 | 2002-09-01(R 2013) | English | (R) Clarification of Terms Used in Aerospace Metals Specifications |
| 343 | SAE AIR825/9-2002 | 2002-09-01(R 2012) | English | Demand Oxygen Systems |
| 344 | SAE AMS4120R-2002 | 2002-09-01(R 2010) | English | Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351) - UNS A92024
DoD Adopted |
| 345 | SAE AMS4149D-2002 | 2002-09-01(R 2010) | English | Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and Precipitation Heat Treated - UNS A97175
DoD Adopted |
| 346 | SAE J380-2002 | 2002-09-01(R 2009) | English | (R) Specific Gravity of Friction Material
DoD Adopted |
| 347 | SAE ARP5577-2002 | 2002-09-01(R 2008) | English | Aircraft Lightning Direct Effects Certification |
| 348 | SAE AIR1667A-2002 | 2002-09-01(R 2008) | English | (R) Rotor Blade Electrothermal Ice Protection Design Considerations |
| 349 | SAE AMS7718F-2002 | 2002-09-01(R 2007) | English | Nickel-Iron Alloy, Magnetic, Bars, Rods, Tubing, and Forgings 50Ni - 50Fe - UNS K95000
DoD Adopted |
| 350 | SAE AS9357A-2002 | 2002-09-01(R 2007) | English | (R) NUT, PLAIN, HEXAGON, SILVER PLATED, UNS S66286 130 KSI MIN
DoD Adopted |
| 351 | SAE AS9361A-2002 | 2002-09-01(R 2007) | English | (R) Nut, Plain, Hexagon, Check, UNS S66286, 130 KSI MIN
DoD Adopted |
| 352 | SAE AIR1666A-2002 | 2002-09-01(R 2007) | English | (R) Performance Testing of Lubricant Filter Elements Utilized in Aircraft Power and Propulsion Lubrication Systems |
| 353 | SAE AIR825/9-2002 | 2002-09-01(R 2007) | English | Demand Oxygen Systems |
| 354 | SAE ARP695D-2002 | 2002-09-01(R 2007) | English | Galley System Design and Installation Criteria |
| 355 | SAE AIR1957-2002 | 2002-09-01(R 2007) | English | Heat Sinks for Airborne Vehicles |
| 356 | SAE AMS2426D-2002 | 2002-09-01(R 2007) | English | Coating, Cadmium Vacuum Deposition |
| 357 | SAE AS9390B-2002 | 2002-09-01(R 2007) | English | (R) Pin, Straight, Headless, Dowel - CRES, UNS S66286, Standard and Oversize
DoD Adopted |
| 358 | SAE ARP922A-2002 | 2002-09-01(R 2006) | English | Electroluminescence, Design Criteria and Recommendations for Use in Aerospace Vehicle Crew Station Areas |
| 359 | SAE AMS-S-8840A-2002 | 2002-09-01 | English | Steel Sheet and Strip, Corrosion-Resistant, Precipitation Hardening (AM350 and AM355), Premium Quality |
| 360 | SAE USCAR-23-2002 | 2002-09-01 | English | ROAD VEHICLES 鈥?60 V AND 600 V SINGLE CORE (ISO/METRIC) CABLES 鈥?DIMENSIONS, TEST METHODS AND REQUIREMENTS |
| 361 | SAE J2711-2002 | 2002-09-01 | English | Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty Vehicles |
| 362 | SAE AMS-S-6709A-2002 | 2002-09-01 | English | Steel, Chrome-Molybdenum-Aluminum; Bars, Rods, Billets and Forging Stock (for Nitriding) (Aircraft Quality) |
| 363 | SAE AMS-S-7952A-2002 | 2002-09-01 | English | Steel, Sheet and Strip, Uncoated, Carbon (1020 and 1025) (Aircraft Quality) |
| 364 | SAE AMS-S-8503A-2002 | 2002-09-01 | English | Steel Bars, Chrome-Vanadium (6150), Aircraft Quality |
| 365 | SAE AMS-S-8690A-2002 | 2002-09-01 | English | Steel, Chrome-Nickel-Molybdenum, 8620, Bars Aircraft Quality |
| 366 | SAE AS5488-2002 | 2002-09-01 | English | Regional Aircraft Towbar Attach Fitting Interface |
| 367 | SAE AS27645B-2002 | 2002-09-01 | English | (R) Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Light and Heavy Duty
DoD Adopted |
| 368 | SAE ARP1917A-2002 | 2002-09-01 | English | (R) Clarification of Terms Used in Aerospace Metals Specifications |
| 369 | SAE AMS-STD-1595A-2002 | 2002-09-01 | English | Qualification of Aircraft, Missile and Aerospace Fusion Welders |
| 370 | SAE AS27640B-2002 | 2002-09-01 | English | (R) Bearing, Ball, Airframe, Anti-Friction, Heavy Duty
DoD Adopted |
| 371 | SAE AMS-STD-2219A-2002 | 2002-09-01 | English | Fusion Welding for Aerospace Applications |
| 372 | SAE AIR825/9-2002 | 2002-09-01 | English | Demand Oxygen Systems |
| 373 | SAE AIR825/9-2002 | 2002-09-01 | English | Demand Oxygen Systems |
| 374 | SAE ARP1281C-2002 | 2002-09-01 | English | (R) Actuators: Aircraft Flight Controls, Power Operated, Hydraulic, General Specification For |
| 375 | SAE AIR1957-2002 | 2002-09-01 | English | Heat Sinks for Airborne Vehicles |
| 376 | SAE T-105-2002 | 2002-08-23 | English | Automotive Telematics An Introduction to the Technical Aspects of Automotive Telematics with Reference to Business Model and User Needs - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 377 | SAE J1789-2002 | 2002-08-01(R 2014) | English | Self-Propelled Sweepers and Scrubbers Braking Performance |
| 378 | SAE AMS5376G-2002 | 2002-08-01(R 2013) | English | Alloy, Corrosion and Heat Resistant, Investment Castings 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N As Cast - UNS R30155 |
| 379 | SAE AMS5515L-2002 | 2002-08-01(R 2013) | English | Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 8.5Ni (302) Solution Heat Treated, High Ductility - UNS S30200 |
| 380 | SAE AMS5563C-2002 | 2002-08-01(R 2012) | English | Steel, Corrosion Resistant, Seamless or Welded Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, ¼ Hard Temper - UNS S30400 |
| 381 | SAE AMS5557J-2002 | 2002-08-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated - UNS S32100 |
| 382 | SAE AMS5567E-2002 | 2002-08-01(R 2012) | English | Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (SAE 30304) Solution Heat Treated - UNS S30400 |
| 383 | SAE AIR825/11A-2002 | 2002-08-01(R 2012) | English | Closed-Cycle Protective Breathing Devices |
| 384 | SAE AIR825/10A-2002 | 2002-08-01(R 2012) | English | Protective Breathing Equipment for Flight Deck and Cabin Crew Members |
| 385 | SAE AIR825/4A-2002 | 2002-08-01(R 2011) | English | Chemical Oxygen Systems |
| 386 | SAE AMS4179C-2002 | 2002-08-01(R 2010) | English | Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated - UNS A97175
DoD Adopted |
| 387 | SAE AMS4161G-2002 | 2002-08-01(R 2010) | English | Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged - UNS A96061 |
| 388 | SAE AMS4324-2002 | 2002-08-01(R 2010) | English | Aluminum Alloy, Extruded Rod, Bar and Profiles (7055-T74511) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress-Relieved, and Overaged - UNS A97055 |
| 389 | SAE AMS2231J-2002 | 2002-08-01(R 2008) | English | Tolerances Carbon Steel Bars |
| 390 | SAE AMS6453B-2002 | 2002-08-01(R 2007) | English | Steel, Welding Wire 0.30Cr - 1.8Ni - 0.40Mo - (0.23 - 0.28C) Vacuum Melted, Environment Controlled Packaging - UNS K32550
DoD Adopted |
| 391 | SAE AMS5557J-2002 | 2002-08-01(R 2007) | English | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated - UNS S32100
DoD Adopted |
| 392 | SAE AMS6452C-2002 | 2002-08-01(R 2007) | English | Steel, Welding Wire 0.95Cr - 0.20Mo (0.38 - 0.43C) Vacuum Melted, Environment Controlled Packaging - UNS G41400 |
| 393 | SAE AMS5648K-2002 | 2002-08-01(R 2007) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 17Cr - 12Ni - 2.5Mo Solution Heat Treated - UNS S31600 |
| 394 | SAE AS9724B-2002 | 2002-08-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS N07001, 165 KSI MIN, .2500-28 UNJF-3A
DoD Adopted |
| 395 | SAE AMS7496J-2002 | 2002-08-01(R 2007) | English | Rings, Flash Welded Carbon and Low-Alloy Steels
DoD Adopted |
| 396 | SAE AMS5376G-2002 | 2002-08-01(R 2007) | English | Alloy, Corrosion and Heat Resistant, Investment Castings 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N As Cast - UNS R30155 |
| 397 | SAE ARP5507-2002 | 2002-08-01(R 2007) | English | Aircraft Tire-to-Wheel Performance Characteristics |
| 398 | SAE AMS5653F-2002 | 2002-08-01(R 2007) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 17Cr - 12Ni - 2.5Mo (0.030 Max C) Solution Heat Treated - UNS S31603
DoD Adopted |
| 399 | SAE AMS2281A-2002 | 2002-08-01(R 2007) | English | Trace Element Control Nickel Alloy, Cobalt Alloy, and Iron Alloy Wrought Products for High-Temperature, High-Stressed Applications |
| 400 | SAE AMS5563C-2002 | 2002-08-01(R 2007) | English | Steel, Corrosion Resistant, Seamless or Welded Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, 录 Hard Temper - UNS S30400
DoD Adopted |
| 401 | SAE AMS5755F-2002 | 2002-08-01(R 2007) | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 64Ni - 5.0Cr - 24.5Mo - 5.5Fe Solution Heat Treated - UNS N10004
DoD Adopted |
| 402 | SAE J1792-2-2002 | 2002-08-01(R 2007) | English | Self-Propelled Sweepers鈥擜ir Flow Performance鈥?Part 2: Suction/Blower Fan Performance |
| 403 | SAE AIR825/10A-2002 | 2002-08-01(R 2007) | English | Protective Breathing Equipment for Flight Deck and Cabin Crew Members |
| 404 | SAE AIR825/11A-2002 | 2002-08-01(R 2007) | English | Closed-Cycle Protective Breathing Devices |
| 405 | SAE AMS6529B-2002 | 2002-08-01(R 2007) | English | Steel, Bars 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Special Aircraft-Quality Cleanliness Normalized
DoD Adopted |
| 406 | SAE J1791-2002 | 2002-08-01(R 2007) | English | Self-Propelled Sweepers and Scrubbers Dual Position Driving Controls and Displays |
| 407 | SAE AMS5782F-2002 | 2002-08-01(R 2007) | English | Steel, Corrosion and Heat-Resistant, Welding Wire 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti Vacuum Induction Melted - UNS S63197
DoD Adopted |
| 408 | SAE AMS5567E-2002 | 2002-08-01(R 2007) | English | Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (SAE 30304) Solution Heat Treated - UNS S30400
DoD Adopted |
| 409 | SAE J1789-2002 | 2002-08-01(R 2007) | English | Self-Propelled Sweepers and Scrubbers Braking Performance |
| 410 | SAE AMS6528B-2002 | 2002-08-01(R 2007) | English | Steel, Bars 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Special Aircraft Quality Cleanliness Normalized - UNS G41300
DoD Adopted |
| 411 | SAE AMS5027E-2002 | 2002-08-01(R 2007) | English | Steel, Welding Wire 1.05Cr - 0.55Ni - 1.0Mo - 0.08V (0.26 - 0.32C) Vacuum Melted, Environment-Controlled Packaging - UNS K22925
DoD Adopted |
| 412 | SAE AMS5899A-2002 | 2002-08-01(R 2007) | English | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) Powder Metallurgy Product, Hot Isostatically Pressed - UNS S44004 |
| 413 | SAE AIR1678A-2002 | 2002-08-01(R 2007) | English | Uncertainty of In-Flight Thrust Determination |
| 414 | SAE AMS5515L-2002 | 2002-08-01(R 2007) | English | Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 8.5Ni (302) Solution Heat Treated, High Ductility - UNS S30200 |
| 415 | SAE AMS6323K-2002 | 2002-08-01(R 2007) | English | Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) - UNS G87400
DoD Adopted |
| 416 | SAE EIA-731.2-2002 | 2002-08-01 | English | Systems Engineering Capability Model Appraisal Method - Formerly TechAmerica EIA-731.2 |
| 417 | SAE J1099-2002 | 2002-08-01 | English | Technical Report on Low Cycle Fatigue Properties Ferrous and Non-Ferrous of Materials |
| 418 | SAE ARP5507-2002 | 2002-08-01 | English | Aircraft Tire-to-Wheel Performance Characteristics |
| 419 | SAE EIA-731.1-2002 | 2002-08-01 | English | Systems Engineering Capability Model - Formerly TechAmerica EIA-731.1 |
| 420 | SAE ARP5507-2002 | 2002-08-01 | English | Aircraft Tire-to-Wheel Performance Characteristics |
| 421 | SAE AIR825/10A-2002 | 2002-08-01 | English | Protective Breathing Equipment for Flight Deck and Cabin Crew Members |
| 422 | SAE J1228-2002 | 2002-08-01 | English | Small CraftMarine Propulsion Engine and SystemsPower Measurements and Declarations - WITHDRAWN - NO LONGER AVAILABLE |
| 423 | SAE AIR825/11A-2002 | 2002-08-01 | English | Closed-Cycle Protective Breathing Devices |
| 424 | SAE MS1010-2002 | 2002-08-01 | English | Lubricants, Industrial Oils, and Related Products Type T Turbine Oils -- Specification |
| 425 | SAE AIR825/4A-2002 | 2002-08-01 | English | Chemical Oxygen Systems |
| 426 | SAE AIR825/11A-2002 | 2002-08-01 | English | Closed-Cycle Protective Breathing Devices |
| 427 | SAE AMS5409A-2002 | 2002-08-01 | English | Alloy Casting, Investment, Corrosion and Heat Resistant 61Ni- 16Cr - 8.5Co - 1.8Mo - 2.6W - 0.8Cb - 3.4Ti - 1.8Ta - 3.4Al - 0.010B - 0.06Zr (0.03 - 0.08C) Vacuum Melted, Vacuum Cast as Cast |
| 428 | SAE J1247-2002 | 2002-08-01 | English | Simulated Mountain-Brake Performance Test Procedure |
| 429 | SAE AIR825/4A-2002 | 2002-08-01 | English | Chemical Oxygen Systems |
| 430 | SAE AMS3603A-2002 | 2002-08-01 | English | (R) Protective Film, High Performance, Polymeric Pressure Sensitive Adhesive, for Aircraft Exterior Applications |
| 431 | SAE AIR825/4A-2002 | 2002-08-01 | English | Chemical Oxygen Systems |
| 432 | SAE AIR825/10A-2002 | 2002-08-01 | English | Protective Breathing Equipment for Flight Deck and Cabin Crew Members |
| 433 | SAE J2494-4-2002 | 2002-07-01(R 2018) | English | Cartridge Cavity |
| 434 | SAE J314-2002 | 2002-07-01(R 2012) | English | Felts - Wool and Part Wool |
| 435 | SAE ARP5143-2002 | 2002-07-01(R 2011) | English | Vacuum Bagging of Thermosetting Composite Repairs |
| 436 | SAE ARP5319-2002 | 2002-07-01(R 2011) | English | Impregnation of Dry Fabric and Ply Lay-Up |
| 437 | SAE AMS2436D-2002 | 2002-07-01(R 2011) | English | Coating, Aluminum Oxide Detonation Deposition |
| 438 | SAE J2494-4-2002 | 2002-07-01(R 2011) | English | Cartridge Cavity |
| 439 | SAE ARP5448/3-2002 | 2002-07-01(R 2010) | English | Plain Bearing Low Speed Oscillation Test |
| 440 | SAE ARP5448/7-2002 | 2002-07-01(R 2009) | English | Plain Bearing Wear Measurement |
| 441 | SAE AS393B-2002 | 2002-07-01(R 2008) | English | Airspeed Tubes Electrically Heated |
| 442 | SAE AS9582A-2002 | 2002-07-01(R 2007) | English | (R) Washer, Key - 270 Deg. Locking, CRES, UNS S32100
DoD Adopted |
| 443 | SAE J2520-2002 | 2002-07-01(R 2007) | English | Classification, Nomenclature, and Specification Definitions for Directional Drilling Tracking Equipment |
| 444 | SAE J1792-1-2002 | 2002-07-01(R 2007) | English | Self-Propelled Sweepers - Air Flow Performance Part 1: Suction Air Volume Performance |
| 445 | SAE AMS2374D-2002 | 2002-07-01(R 2007) | English | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steel and Alloy Forgings |
| 446 | SAE AMS6525C-2002 | 2002-07-01(R 2007) | English | Steel, Bars, Forgings, Tubing, and Rings 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Consumable Electrode Vacuum Melted - UNS K91472
DoD Adopted |
| 447 | SAE AS3254B-2002 | 2002-07-01(R 2007) | English | (R) Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, CRES, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A |
| 448 | SAE AS3255B-2002 | 2002-07-01(R 2007) | English | (R) Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, CRES, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A |
| 449 | SAE AS3256B-2002 | 2002-07-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CRES, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A |
| 450 | SAE AMS5639H-2002 | 2002-07-01(R 2007) | English | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 19Cr - 10Ni Solution Heat Treated - UNS S30400
DoD Adopted |
| 451 | SAE AS5356A-2002 | 2002-07-01(R 2007) | English | (R) Coupling, Fuel Line, Flexible, 125 psi General Specification for - Should Be Used Instead of MIL-C-85061B, Which Was Cancelled on 24 August 1999
DoD Adopted |
| 452 | SAE J1887-2002 | 2002-07-01(R 2007) | English | Automotive Compacted Graphite Iron Castings |
| 453 | SAE AS9276A-2002 | 2002-07-01(R 2007) | English | (R) Washer, Key - 180 Deg. Locking, CRES, UNS S32100
DoD Adopted |
| 454 | SAE AS9581A-2002 | 2002-07-01(R 2007) | English | (R) Washer, Key - 90 Deg. Locking, CRES, UNS32100
DoD Adopted |
| 455 | SAE J314-2002 | 2002-07-01(R 2007) | English | Felts - Wool and Part Wool |
| 456 | SAE AMS6487J-2002 | 2002-07-01(R 2007) | English | Steel, Bars, and Forgings 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum Melted - UNS T20811
DoD Adopted |
| 457 | SAE AMS2436D-2002 | 2002-07-01(R 2007) | English | Coating, Aluminum Oxide Detonation Deposition
DoD Adopted |
| 458 | SAE AMS2422E-2002 | 2002-07-01(R 2007) | English | (R) Plating, Gold |
| 459 | SAE AMS5647H-2002 | 2002-07-01(R 2007) | English | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, And Rings 19Cr - 9.5Ni Solution Heat Treated - UNS S30403
DoD Adopted |
| 460 | SAE AMS4996B-2002 | 2002-07-01 | English | Billets And Preforms 6Al - 4V Premium Quality, Powder- Metallurgy Product |
| 461 | SAE J2484-2002 | 2002-07-01 | English | Fastener Part StandardMachine Screws |
| 462 | SAE AS1861A-2002 | 2002-07-01 | English | Nut, Sleeve Coupling, Tube Reducer, Flared |
| 463 | SAE AS33-2002 | 2002-07-01 | English | NUTS, PLAIN HEXAGON - AIRCRAFT ENGINE |
| 464 | SAE AMS1730B-2002 | 2002-07-01 | English | UREA COMPOUND,SHOTTED |
| 465 | SAE J2106-2002 | 2002-07-01 | English | Token Slot Network for Automotive Control |
| 466 | SAE AMS4974D-2002 | 2002-07-01 | English | Titanium Alloy, Bars and Forgings 11Sn - 5.0Zr - 2.3Al - 1.0Mo - 0.21Si Solution and Precipitation Heat Treated (UNS R54790) |
| 467 | SAE AMS5658-2002 | 2002-07-01 | English | Steel Bars, Forgings, And Rings Corrosion Resistant 15cr-4.5ni-.30 (Cb+Ta)-3.5cu |
| 468 | SAE J2494-4-2002 | 2002-07-01 | English | Cartridge Cavity |
| 469 | SAE ARP5319-2002 | 2002-07-01 | English | Impregnation of Dry Fabric and Ply Lay-Up |
| 470 | SAE MS1009-2002 | 2002-07-01 | English | Lubricants, Industrial Oils, and Related Products Type P Pneumatic Tool Oils -- Specification |
| 471 | SAE AS9133-2002 | 2002-07-01 | English | Qualification Procedure for Aerospace Standard Parts |
| 472 | SAE J2540-2002 | 2002-07-01 | English | Messages for Handling Strings and Look-Up Tables in ATIS Standards |
| 473 | SAE J2540-1-2002 | 2002-07-01 | English | RDS Phrase Lists |
| 474 | SAE ARP5319-2002 | 2002-07-01 | English | Impregnation of Dry Fabric and Ply Lay-Up |
| 475 | SAE AMS7897C-2002 | 2002-07-01 | English | Tungsten Forgings Pressed, Sintered, and Forged |
| 476 | SAE J2058-2002 | 2002-07-01 | English | Chrysler Sensor and Control (CSC) Bus Multiplexing Network for Class 'A' Applications |
| 477 | SAE AS1856A-2002 | 2002-07-01 | English | Installation, Non- Reversible Fitting End - FSC 4730 |
| 478 | SAE AMS2436D-2002 | 2002-07-01 | English | Coating, Aluminum Oxide Detonation Deposition |
| 479 | SAE AMS7898D-2002 | 2002-07-01 | English | Tungsten Sheet, Strip, Plate, and Foil Pressed, Sintered, and Wrought |
| 480 | SAE AS1857A-2002 | 2002-07-01 | English | Fitting End, Non-Reversible, Flareless Tube Connection, Oversize Thread |
| 481 | SAE AS1858A-2002 | 2002-07-01 | English | Fitting End, Non- Reversible, Flared Tube Connection, Oversize Thread - FSC 4730 |
| 482 | SAE AS1859A-2002 | 2002-07-01 | English | Fitting End, Non- Reversible, Straight Thread, Boss Connection - FSC 4730 |
| 483 | SAE J2494-4-2002 | 2002-07-01 | English | Cartridge Cavity |
| 484 | SAE AS1860A-2002 | 2002-07-01 | English | Nut, Sleeve Coupling, Tube Reducer, Flareless - FSC 4730 |
| 485 | SAE J/ISO 5011-2002 | 2002-07-01 | English | Inlet air cleaning equipment for internal combustion engines and compressors Performance testing - This document is no longer maintained by SAE |
| 486 | SAE ARP5143-2002 | 2002-07-01 | English | Vacuum Bagging of Thermosetting Composite Repairs |
| 487 | SAE AMS4936E-2002 | 2002-07-01 | English | Titanium Alloy Extrusions and Flash Welded Rings 6Al - 6V - 2Sn Beta Extruded Plus Annealed, Heat Treatable (UNS R56620) |
| 488 | SAE AIR5113-2002 | 2002-06-01(R 2012) | English | Legal Issues Associated with the Use of Probabilistic Design Methods |
| 489 | SAE ARP5448/4-2002 | 2002-06-01(R 2010) | English | Plain Bearing Bond Integrity - Peelable Woven Fabric PTFE Liners |
| 490 | SAE AIR5575-2002 | 2002-06-01(R 2009) | English | Hot Stamp Wire Marking Concerns for Aerospace Vehicle Applications |
| 491 | SAE J20-1-2002 | 2002-06-01(R 2009) | English | Coolant Hose
DoD Adopted |
| 492 | SAE AIR5271-2002 | 2002-06-01(R 2009) | English | A Guideline for Application of High-Density Fiber Optic Interconnects to Aerospace Platforms |
| 493 | SAE ARP1782A-2002 | 2002-06-01(R 2008) | English | Photometric and Colorimetric Measurement Procedures for Airborne Direct View CRT Displays |
| 494 | SAE AIR5464-2002 | 2002-06-01(R 2008) | English | Metal Clad Fibers for Electrical Shielding & Harness Overbraid |
| 495 | SAE AS3250B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CRES, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A |
| 496 | SAE AS3237B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A |
| 497 | SAE J2519-2002 | 2002-06-01(R 2007) | English | Guidelines and Procedures for Directional Drilling Tracking Operators |
| 498 | SAE AS3238B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A |
| 499 | SAE AS3253B-2002 | 2002-06-01(R 2007) | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CRES, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A |
| 500 | SAE AS3241B-2002 | 2002-06-01(R 2007) | English | (R) Bolt, Machine-Double Hexagon Extended Washer Head, PD Shank, CRES, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A |
|