| Pos | standard Number | publication date | Language | Description |
| 1 | SAE AMS4210M-2021 | 2021-04-01 | English | Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T51) Precipitation Heat Treated - UNS A03550 |
| 2 | SAE AS9947C-2021 | 2021-04-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL SHANK, STEEL UNS G87400 CADMIUM PLATED, .5625-18 UNJF-3A |
| 3 | SAE EPR2021007-2021 | 2021-03-26 | English | Unsettled Issues Regarding the Certification of Electric Aircraft; (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES) - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 4 | SAE EPR2021008-2021 | 2021-03-18 | English | Unsettled Issues on Sensor Calibration for Automotive Aftermarket Advanced Driver-Assistance Systems; (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES) - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 5 | SAE J3069-2021 | 2021-03-01 | English | Adaptive Driving Beam System |
| 6 | SAE J588-2021 | 2021-03-01 | English | Turn Signal Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width |
| 7 | SAE AS9679C-2021 | 2021-03-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A |
| 8 | SAE AS9317D-2021 | 2021-03-01 | English | PLATE |
| 9 | SAE ARP5765B-2021 | 2021-03-01 | English | Analytical Methods for Aircraft Seat Design and Evaluation |
| 10 | SAE AS7466F-2021 | 2021-03-01 | English | (R) Bolts and Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 ksi, Fatigue Rated, Procurement Specification |
| 11 | SAE MA3368A-2021 | 2021-03-01 | English | BOLT, MACHINE-SPLINE EXTENDED WASHER, PD SHANK, LONG THREAD, DRILLED, NICKEL ALLOY (UNS N07718), METRIC |
| 12 | SAE J2847/3-2021 | 2021-03-01 | English | (R) Communication for Plug-in Vehicles as a Distributed Energy Source |
| 13 | SAE AS81969/29A-2021 | 2021-03-01 | English | REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACT, TYPE II, CLASS 1, COMPOSITION B |
| 14 | SAE J192-2021 | 2021-03-01 | English | Maximum Exterior Sound Level for Snowmobiles |
| 15 | SAE MA3348A-2021 | 2021-03-01 | English | BOLT, SPLINE DRIVE EXTENDED WASHER HEAD, PD SHANK, LONG THREAD, NICKEL ALLOY (UNS N07001), METRIC |
| 16 | SAE AIR5995A-2021 | 2021-03-01 | English | Evaluation of Human Factor Considerations for Outdoor Laser Operations in the Navigable Airspace |
| 17 | SAE AS7471J-2021 | 2021-03-01 | English | (R) Bolts and Screws, Nickel Alloy, UNS N07001 Tensile Strength 165 ksi, Corrosion and Heat Resistant Procurement Specification |
| 18 | SAE AS6488-2021 | 2021-03-01 | English | FITTING, TEE, BULKHEAD, MALE FLARELESS TO EXTERNAL SWAGE ON RUN, EXTERNAL SWAGE ON BRANCH, HYDRAULIC |
| 19 | SAE AS6298A-2021 | 2021-03-01 | English | CLAMP ASSEMBLY, LOOP, CUSHIONED HINGED |
| 20 | SAE AS6940-2021 | 2021-03-01 | English | Standard Test Method for Measuring Forces During Normal Impact of a Soft Projectile on a Rigid Flat Surface |
| 21 | SAE AIR7929-2021 | 2021-03-01 | English | Qualification of Percon 24, a New High-Strength Conductor Alloy to AS29606 |
| 22 | SAE J3063-2021 | 2021-03-01 | English | (R) Active Safety Systems Terms and Definitions |
| 23 | SAE AS6960-2021 | 2021-03-01 | English | Performance Standard for Seat Furnishings in Transport Aircraft |
| 24 | SAE AS85485/5B-2021 | 2021-03-01 | English | CABLE, ELECTRIC, FILTER LINE, COMPONENT WIRE, TIN-COATED COPPER CONDUCTOR, RADIO FREQUENCY ABSORPTIVE, 150 °C, 600-VOLT |
| 25 | SAE AMS5508G-2021 | 2021-03-01 | English | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 13Cr - 2.0Ni - 3.0W Annealed - UNS S41800 |
| 26 | SAE AS85485/6B-2021 | 2021-03-01 | English | CABLE, ELECTRIC, FILTER LINE, COMPONENT WIRE, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, RADIO FREQUENCY ABSORPTIVE, 150 °C, 600-VOLT |
| 27 | SAE AMS3307E-2021 | 2021-03-01 | English | (R) Elastomer: Rubber, Silicone (VMQ) Non-Oil-Resistant Low Compression Set 65 - 75 Shore A Hardness |
| 28 | SAE AIR4779D-2021 | 2021-03-01 | English | User's Guide to AMS Specifications |
| 29 | SAE AIR4092B-2021 | 2021-03-01 | English | Investigation of PTFE “Melt” Phenomenon for High Pressure Hoses |
| 30 | SAE AIR2000F-2021 | 2021-03-01 | English | Aerospace Fluid System Standards, Metric, National and International |
| 31 | SAE EIA-731.2A-2021 | 2021-03-01 | English | Systems Engineering Capability Model Appraisal Method - Formerly TechAmerica EIA-731.2 |
| 32 | SAE EIA-731.1A-2021 | 2021-03-01 | English | Systems Engineering Capability Model - Formerly TechAmerica EIA-731.1 |
| 33 | SAE J1623-2021 | 2021-03-01 | English | (R) Off-Highway Vehicle Headlamps |
| 34 | SAE J44-2021 | 2021-03-01 | English | (R) Snowmobile Service Brake System |
| 35 | SAE AMS3357H-2021 | 2021-03-01 | English | (R) Elastomer: Silicone Rubber (VMQ) Aircraft Piston Engine Oil Resistant Compression Set Resistant 65 - 75 Type A Hardness |
| 36 | SAE AS3230C-2021 | 2021-03-01 | English | RIVET-TUBULAR, COUNTERSUNK, CORROSION AND HEAT RESISTANT NICKEL ALLOY - UNS N06600 |
| 37 | SAE AS6518A-2021 | 2021-03-01 | English | (R) Unmanned Systems (UxS) Control Segment (UCS) Architecture: UCS Architecture Model - Includes Access to Additional Content |
| 38 | SAE AS1132K-2021 | 2021-03-01 | English | Bolts, Screws, and Nuts - External Wrenching UNJ Thread, Inch - Design Standard |
| 39 | SAE ARP6823-2021 | 2021-03-01 | English | Electronic Transactions for Aerospace Systems: An Overview |
| 40 | SAE AS13100-2021 | 2021-03-01 | English | AESQ Quality Management System Requirements for Aero Engine Design and Production Organizations |
| 41 | SAE ARP5598A-2021 | 2021-03-01 | English | Unauthorized Laser Illuminations: Pilot Operational Procedures |
| 42 | SAE AMS-QQ-P-416F-2021 | 2021-03-01 | English | (R) Plating, Cadmium (Electrodeposited) |
| 43 | SAE J2673-2021 | 2021-03-01 | English | (R) Straight-Line Braking Test for Truck and Bus Tires |
| 44 | SAE J1462-2021 | 2021-03-01 | English | External Automatic Brake Adjuster Test Procedure - Truck and Bus |
| 45 | SAE J1272-2021 | 2021-03-01 | English | Felling Head Terminology and Nomenclature |
| 46 | SAE J1161-2021 | 2021-03-01 | English | (R) Operational Sound Level Measurement Procedure for Snowmobiles |
| 47 | SAE J2370-2021 | 2021-03-01 | English | Geometric Dimensions and Tolerancing for Curved Hose |
| 48 | SAE AS4842B-2021 | 2021-03-01 | English | Fittings and Bosses, Pipe Threaded, Fluid Connection, Procurement Specification |
| 49 | SAE J2387-2021 | 2021-03-01 | English | Dimensions and Tolerances for Coolant System Hoses |
| 50 | SAE AS1895/2D-2021 | 2021-03-01 | English | FLANGE, MALE, SEAM WELD TYPE I STANDARD PROFILE |
| 51 | SAE AS4875B-2021 | 2021-03-01 | English | Fittings, Straight Threaded Boss or Flanged, Fluid Connection, Procurement Specification |
| 52 | SAE AMS6891/4-2021 | 2021-03-01 | English | Carbon Fiber and Fiberglass Epoxy/Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications: Type 42, Class 4, Grade 48, Style 108 |
| 53 | SAE J3113-2021 | 2021-03-01 | English | Principles and Process for Developing Icons for Electronic Displays |
| 54 | SAE AIR6181A-2021 | 2021-03-01 | English | Electronic Propulsion Control System/Aircraft Interface Control Documents |
| 55 | SAE J45-2021 | 2021-03-01 | English | Brake System Test Procedure - Snowmobiles |
| 56 | SAE AMS5869D-2021 | 2021-03-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb Solution Heat Treated - UNS N06625 |
| 57 | SAE MA3347A-2021 | 2021-03-01 | English | BOLT, MACHINE-HEX HEAD-FULL SHANK, LONG THREAD, AMS5731, METRIC |
| 58 | SAE AS81550B-2021 | 2021-03-01 | English | (R) Insulating Compound, Electrical, Embedding, Reversion Resistant Silicone |
| 59 | SAE J3072-2021 | 2021-03-01 | English | (R) Interconnection Requirements for Onboard, Grid Support Inverter Systems |
| 60 | SAE AMS6891/3-2021 | 2021-03-01 | English | Carbon Fiber and Fiberglass Epoxy/Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications: Type 34, Class 4, Grade 294, Style 7781 |
| 61 | SAE AS3114B-2021 | 2021-03-01 | English | BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES UNS S66286, .1900-32 UNJF-3A |
| 62 | SAE EPR2021003-2021 | 2021-02-15 | English | Unsettled Issues Concerning the Use of Green Ammonia Fuel in Ground Vehicles - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 63 | SAE EPR2021005-2021 | 2021-02-15 | English | Unsettled Issues on the Viability and Cost-Effectiveness of Automation in Aerospace Manufacturing - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 64 | SAE EPR2021006-2021 | 2021-02-15 | English | Unsettled Topics on the Benefit of Additive Manufacturing for Production at the Point of Use in the Mobility Industry - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-795 |
| 65 | SAE AS2390A-2021 | 2021-02-01 | English | Chemical Process Test Specimen Material |
| 66 | SAE AIR4869B-2021 | 2021-02-01 | English | Design Considerations for Enclosed Turbofan/Turbojet Engine Test Cells |
| 67 | SAE AMS2424G-2021 | 2021-02-01 | English | Plating, Nickel Low-Stressed Deposit |
| 68 | SAE AIR5866A-2021 | 2021-02-01 | English | An Assessment of Planar Waves |
| 69 | SAE AS85049/20C-2021 | 2021-02-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, RFI/EMI CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) |
| 70 | SAE AS5169C-2021 | 2021-02-01 | English | FITTING, PORT PLUG AND BLEEDER |
| 71 | SAE ARP1598C-2021 | 2021-02-01 | English | Landing Gear System Development Plan |
| 72 | SAE AS5166C-2021 | 2021-02-01 | English | FITTING, TEE, AIR PRESSURE GAUGE |
| 73 | SAE AMS6458K-2021 | 2021-02-01 | English | Steel, Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) Vacuum Melted, Environment Controlled Packaging - UNS K23015 |
| 74 | SAE AMS6885-2021 | 2021-02-01 | English | Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 0 - Introduction |
| 75 | SAE AS39029/59C-2021 | 2021-02-01 | English | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 8 (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS) |
| 76 | SAE AS39029/85B-2021 | 2021-02-01 | English | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE (FOR AS50151 AS34501 SERIES AND MIL-DTL-83723 SERIES II CONNECTORS) |
| 77 | SAE AS39029/86B-2021 | 2021-02-01 | English | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR AS50151 AS34501 SERIES AND MIL-DTL-83723 SERIES II CONNECTORS) |
| 78 | SAE AS85598-2021 | 2021-02-01 | English | Bearings, Elastomeric General Specification for |
| 79 | SAE J1967-2021 | 2021-02-01 | English | (R) Retroreflective Materials for Vehicle Conspicuity |
| 80 | SAE AS39029/83B-2021 | 2021-02-01 | English | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-28840 CONNECTORS) |
| 81 | SAE AS1290C-2021 | 2021-02-01 | English | (R) Graphic Symbols for Aircraft Hydraulic and Pneumatic Systems |
| 82 | SAE AIR1168/4C-2021 | 2021-02-01 | English | SAE Aerospace Applied Thermodynamics Manual Ice, Rain, Fog, and Frost Protection |
| 83 | SAE AS5756C-2021 | 2021-02-01 | English | Cable, Power, Electrical, Portable General Specification for |
| 84 | SAE AMS6885/3-2021 | 2021-02-01 | English | Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 3 - Purchasing Specification for Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg |
| 85 | SAE AMS6885/4-2021 | 2021-02-01 | English | Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive |
| 86 | SAE AMS6885/5-2021 | 2021-02-01 | English | Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 5 - Material Specification for Unidirectional Carbon Fiber Tape Epoxy Prepreg for Repair and Film Adhesive for Repair, 120 to 145 °C (250 to 290 °F) Curing |
| 87 | SAE AMS6885/2-2021 | 2021-02-01 | English | Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 2 - Qualification Program for Fiber, Carbon Fiber Tape Prepreg, and Film Adhesive |
| 88 | SAE AMS6885/1-2021 | 2021-02-01 | English | Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 1 - General Requirements |
| 89 | SAE AS7928/10B-2021 | 2021-02-01 | English | (R) TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, TIN WHISKER RESISTANT (PERMANENT, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE |
| 90 | SAE J899-2021 | 2021-02-01 | English | (R) Operator's Seat Dimensions for Off-Road Self-Propelled Work Machines |
| 91 | SAE EIA-632A-2021 | 2021-02-01 | English | Processes for Engineering a System - Formerly TechAmerica EIA-632 |
| 92 | SAE AS5172E-2021 | 2021-02-01 | English | FITTING, ADAPTER, PORT, REDUCER |
| 93 | SAE AIR7506-2021 | 2021-02-01 | English | Impact of High Voltage on Wiring |
| 94 | SAE ARP6275A-2021 | 2021-02-01 | English | Determination of Costs and Benefits from Implementing an Integrated Vehicle Health Management System |
| 95 | SAE J267-2021 | 2021-02-01 | English | Wheels/Rims - Truck and Bus - Performance Requirements and Test Procedures for Radial and Cornering Fatigue |
| 96 | SAE J3230/1-2021 | 2021-02-01 | English | Kinematic Performance Metrics for Powered Standing Scooters |
| 97 | SAE AMS4476A-2021 | 2021-02-01 | English | Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-O) Annealed - UNS A97075 |
| 98 | SAE J2087-2021 | 2021-02-01 | English | (R) Daytime Running Lamp |
| 99 | SAE AIR4275B-2021 | 2021-02-01 | English | (R) Jet Reference Fluid Study for Fuel Tank Sealants |
| 100 | SAE AS5537A-2021 | 2021-02-01 | English | (R) Weather Support to Deicing Decision Making (WSDDM) Winter Weather Nowcasting System |
| 101 | SAE EPR2021004-2021 | 2021-01-18 | English | Unsettled Issues in Electrical Demand for Automotive Electrification Pathways - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 102 | SAE EPR2021002-2021 | 2021-01-18 | English | Unsettled Topics Concerning Coating Detection by LiDAR in Autonomous Vehicles - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 103 | SAE EPR2021001-2021 | 2021-01-18 | English | Unsettled Topics on Surface Finishing of Metallic Powder Bed Fusion Parts in the Mobility Industry - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 104 | SAE J2360-2021 | 2021-01-01 | English | Automotive Gear Lubricants for Commercial and Military Use |
| 105 | SAE J1863-2021 | 2021-01-01 | English | Coach Joint Fracture Test |
| 106 | SAE AS39029/57C-2021 | 2021-01-01 | English | CONTACTS, ELECTRICAL CONNECTORS, SOCKET CRIMP REMOVABLE (FOR MIL-DTL-24308, MIL-DTL-38999 SERIES II, MIL-DTL-55302/68, /71, /72, /75 AND MIL-DTL-83733 CONNECTORS) |
| 107 | SAE AS3161B-2021 | 2021-01-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .5000-20 UNJF-3A |
| 108 | SAE AIR1609B-2021 | 2021-01-01 | English | (R) Aircraft Humidification |
| 109 | SAE AIR1266B-2021 | 2021-01-01 | English | Fault Isolation in Environmental Control Systems of Commercial Transports |
| 110 | SAE AS3400B-2021 | 2021-01-01 | English | BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, AMS5708 (UNS N07001), .1900-32 UNJF-3A |
| 111 | SAE AS3401B-2021 | 2021-01-01 | English | BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, AMS5708 (UNS N07001), .2500-28 UNJF-3A |
| 112 | SAE AS5419/8B-2021 | 2021-01-01 | English | WIRE, THERMOCOUPLE, SMOOTH SURFACE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 260 °C |
| 113 | SAE AS7928/15B-2021 | 2021-01-01 | English | TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, FLAG TONGUE, SIZES 22-10, TYPE I, CLASS I, FOR 150 ºC TOTAL CONDUCTOR TEMPERATURE |
| 114 | SAE ARP570B-2021 | 2021-01-01 | English | Designation of Direction of Rotation of Helicopter Rotors |
| 115 | SAE AMS5859F-2021 | 2021-01-01 | English | Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr - 6.5Ni - 0.75Mo - 0.30Cb - 1.5Cu Consumable Electrode Melted, Solution Heat Treated Precipitation Hardenable - UNS S45000 |
| 116 | SAE AS5419/9B-2021 | 2021-01-01 | English | WIRE, THERMOCOUPLE, SMOOTH SURFACE FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, NORMAL WEIGHT, 260 °C |
| 117 | SAE ARP4102/9B-2021 | 2021-01-01 | English | Flight Management System (FMS) |
| 118 | SAE AS27647E-2021 | 2021-01-01 | English | BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA WIDE, DOUBLE ROW, INTERMEDIATE DUTY |
| 119 | SAE AS39029/34C-2021 | 2021-01-01 | English | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-28748/3 AND MIL-DTL-28748/13 CONNECTORS) |
| 120 | SAE ARP5607B-2021 | 2021-01-01 | English | (R) Legibility of Print on Aerospace Wires and Cables |
| 121 | SAE ARP6420-2021 | 2021-01-01 | English | Guidelines for Characterization of Gas Turbine Engine Total-Pressure, Planar-Wave, and Total-Temperature Inlet-Flow Distortion |
| 122 | SAE J1523-2021 | 2021-01-01 | English | Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives |
| 123 | SAE J243-2021 | 2021-01-01 | English | Methods of Tests for Automotive-Type Sealers, Adhesives, and Deadeners |
| 124 | SAE J1525-2021 | 2021-01-01 | English | Lap Shear Test for Automotive-Type Adhesives for Fiber Reinforced Plastic (FRP) Bonding |
| 125 | SAE J1524-2021 | 2021-01-01 | English | Method of Viscosity Test for Automotive Type Adhesives, Sealers, and Deadeners |
| 126 | SAE J1529-2021 | 2021-01-01 | English | Overlap Shear Test for Automotive Type Sealant for Stationary Glass Bonding |
| 127 | SAE J1553-2021 | 2021-01-01 | English | Cross Peel Test for Automotive Type Adhesives for Fiber-Reinforced Plastic (FRP) Bonding |
| 128 | SAE J1679-2021 | 2021-01-01 | English | Peel Strength of Soft Trim Adhesives |
| 129 | SAE J1700-2021 | 2021-01-01 | English | Softening Point of Interior Trim Adhesives |
| 130 | SAE J1847-2021 | 2021-01-01 | English | Abrasion Resistance Testing - Vehicle Exterior Graphics and Pin Striping |
| 131 | SAE J1836-2021 | 2021-01-01 | English | Overlap Shear Test for Sealant Adhesive Bonding of Automotive Glass Encapsulating Material to Body Opening |
| 132 | SAE J1739-2021 | 2021-01-01 | English | (R) Potential Failure Mode and Effects Analysis (FMEA) Including Design FMEA, Supplemental FMEA-MSR, and Process FMEA |
| 133 | SAE J1907-2021 | 2021-01-01 | English | Peel Adhesion Test for Glass to Elastomeric Material for Automotive Glass Encapsulation |
| 134 | SAE J1864-2021 | 2021-01-01 | English | Method for Evaluating Material Separation in Automotive Sealers Under Pressure in Static Conditions |
| 135 | SAE J1851-2021 | 2021-01-01 | English | Induction Cure Test for Metal Bonding Adhesives |
| 136 | SAE J1918-2021 | 2021-01-01 | English | Method for the Determination of Expansion and Water Absorption in Automotive Sealers |
| 137 | SAE J2100-2021 | 2021-01-01 | English | Accelerated Environmental Testing for Bonded Automotive Assemblies |
| 138 | SAE J1969-2021 | 2021-01-01 | English | Electrocoat Compatibilities of Automotive Sealers |
| 139 | SAE J2025-2021 | 2021-01-01 | English | Method for Evaluating the Flow Properties of Pumpable Sealers |
| 140 | SAE J2215-2021 | 2021-01-01 | English | Surface Match Verification Method for Pressure Sensitive Adhesively Attached Components |
| 141 | SAE J2301-2021 | 2021-01-01 | English | Universal Joint End Yoke Connection (Earwork) |
| 142 | SAE J2730-2021 | 2021-01-01 | English | Dynamic Cleat Test with Perpendicular and Inclined Cleats |
| 143 | SAE J3176-2021 | 2021-01-01 | English | Cable Marking for Circuit Identification in Multi-Voltage Power Distribution Systems |
| 144 | SAE J3079/1-2021 | 2021-01-01 | English | Validation of Compressibility Test Systems for Friction Materials |
| 145 | SAE AMS4510J-2021 | 2021-01-01 | English | Phosphor Bronze, Sheet, Strip, and Plate 94.5Cu - 4.0Sn - 0.19P Spring Temper (H08) - UNS C51000 |
| 146 | SAE ARP1110D-2021 | 2021-01-01 | English | Minimizing Stress Corrosion Cracking in Wrought Forms of Steels and Corrosion Resistant Steels and Alloys |
| 147 | SAE USCAR-12-2021 | 2021-01-01 | English | Electrical Connector Design Requirements - Revision 6 |
| 148 | SAE USCAR-44-2021 | 2021-01-01 | English | PERFORMANCE SPECIFICATION FOR AUTOMOTIVE WIRE HARNESS RETAINER CLIPS - REVISION 1 |
| 149 | SAE AMS4457A-2021 | 2021-01-01 | English | Aluminum Alloy, Sheet 3.5Cu - 1.1Li - 0.50Mg - 0.40Ag - 0.12Zr (2098-T8) Solution Heat Treated, Cold Worked, and Artificially Aged - UNS A92098 |
| 150 | SAE AMS5794F-2021 | 2021-01-01 | English | Iron Alloy, Corrosion and Heat-Resistant, Welding Wire 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N Annealed - UNS R30155 |
| 151 | SAE ARP5873B-2021 | 2021-01-01 | English | LED Passenger Reading Light Assembly |
| 152 | SAE ARP6277-2021 | 2021-01-01 | English | Commercial Aircraft Hydraulic System Sizing |
| 153 | SAE AS81969/10A-2021 | 2021-01-01 | English | INSTALLING AND REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACT, TYPE I AND II, CLASS 2, COMPOSITION B |
| 154 | SAE AS81969/13A-2021 | 2021-01-01 | English | INSTALLING TOOLS, CONNECTOR, ELECTRICAL CONTACT, (TYPE CR) TYPE I, CLASS 1, COMPOSITION A |
| 155 | SAE AS81969/11A-2021 | 2021-01-01 | English | REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACT, (FORK TYPE, WRAPPOST/CRIMP REMOVABLE) TYPE II, CLASS 1, COMPOSITION C |
| 156 | SAE AS81969/4A-2021 | 2021-01-01 | English | REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACT, (FORK TYPE, WRAP POST/CRIMP REMOVABLE) TYPE II, CLASS 1, COMPOSITION C |
| 157 | SAE AS81969/5A-2021 | 2021-01-01 | English | INSTALLING TOOLS, CONNECTOR, ELECTRICAL CONTACT, (FORK TYPE, CRIMP REMOVABLE) TYPE I, CLASS 1, COMPOSITION A |
| 158 | SAE AS81969/25A-2021 | 2021-01-01 | English | INSTALLING AND REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION C |
| 159 | SAE J1282-2021 | 2021-01-01 | English | (R) Snowmobile Brake Control Systems |
| 160 | SAE J1615-2021 | 2021-01-01 | English | Thread Sealants |
| 161 | SAE J1948-2021 | 2021-01-01 | English | Cab Sleeper Occupant Restraint System Test |
| 162 | SAE J2610-2021 | 2021-01-01 | English | Serial Data Communication Interface |
| 163 | SAE J2784-2021 | 2021-01-01 | English | (R) FMVSS Inertia Dynamometer Test Procedure for Vehicles Below 4540 kg GVWR |
| 164 | SAE J3002-2021 | 2021-01-01 | English | Disc and Drum Brake Dynamometer Low-Frequency Noise Test Procedure |
| 165 | SAE J3042-2021 | 2021-01-01 | English | (R) Measuring Properties of Li-Ion Battery Electrolyte |
| 166 | SAE J3096-2021 | 2021-01-01 | English | Cooling System Non-Metallic Caps and Filler Necks - Threaded Construction |
| 167 | SAE J3214-2021 | 2021-01-01 | English | Breath-Based Alcohol Detection System |
| 168 | SAE AS5193B-2021 | 2021-01-01 | English | FITTING, CROSS, INTERNAL STRAIGHT THREAD PORT |
| 169 | SAE AIR7502-2021 | 2021-01-01 | English | Aircraft Electrical Voltage Level Definitions |
| 170 | SAE AS5161C-2021 | 2021-01-01 | English | FITTING, BOLT, FLUID PASSAGE |
| 171 | SAE AS5192E-2021 | 2021-01-01 | English | FITTING, TEE, INTERNAL STRAIGHT THREAD PORT |
| 172 | SAE AMS59-047-2021 | 2021-01-01 | English | Conformal Coatings for Panels, Printed Circuit and Panels, Electronic Circuit |
| 173 | SAE AS18121B-2021 | 2021-01-01 | English | (R) FERRULES, OUTER, INSULATED, SHIELD TERMINATING, TYPE II TWO-PIECE, CLASS I, FOR SHIELDED CABLE |
| 174 | SAE AS478R-2021 | 2021-01-01 | English | Identification Marking Methods |
| 175 | SAE J3062-2021 | 2021-01-01 | English | Automotive Refrigerant Air-Conditioning Hose Requirements |
| 176 | SAE AS INDEX-2021 | 2021-01-01 | English | AEROSPACE SPECIFICATIONS INDEX - 2021 - AEROSPACE STANDARDS (INCLUDING CONVERTED MILITARY SPECIFICATIONS)-AEROSPACE RECOMMENDED PRACTICES -AEROSPACE INFORMATION REPORTS-AEROSPACE RESOURCE DOCUMENTS-METRIC AEROSPACE STANDARDS AND RECOMMENDED PRACTICES |
| 177 | SAE EPR2020025-2020 | 2020-12-18 | English | Unsettled Topics Concerning Human and Autonomous Vehicle Interaction - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 178 | SAE EPR2020026-2020 | 2020-12-10 | English | Unsettled Topics Concerning the Impact of Quantum Technologies on Automotive Cybersecurity - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 179 | SAE HEB1-C-2020 | 2020-12-01 | English | Human Engineering - Principles and Practices - Formerly TechAmerica HEB1-C |
| 180 | SAE AS3180B-2020 | 2020-12-01 | English | BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .5625-18 UNJF-3A |
| 181 | SAE J1269-2020 | 2020-12-01 | English | Rolling Resistance Measurement Procedure for Passenger Car, Light Truck, and Highway Truck and Bus Tires |
| 182 | SAE MA4187A-2020 | 2020-12-01 | English | BOLT, MACHINE, SPLINE DRIVE, SPECIAL EXTENDED WASHER, REDUCED HEAD, PD SHANK, UNS N07718, METRIC |
| 183 | SAE AMS4310F-2020 | 2020-12-01 | English | Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated - UNS A97075 |
| 184 | SAE AS9924B-2020 | 2020-12-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A |
| 185 | SAE AS9952-2020 | 2020-12-01 | English | WASHER, CUP, LOCK - EXPANDER NUT CORROSION AND HEAT RESISTANT STEEL, UNS S34700 |
| 186 | SAE AS7511B-2020 | 2020-12-01 | English | ASSEMBLED COUPLING ENVELOPE, THREADLESS - FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, ENVELOPE DIMENSIONS |
| 187 | SAE AS9565D-2020 | 2020-12-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .1900-32 UNJF-3A |
| 188 | SAE AMS4897E-2020 | 2020-12-01 | English | Titanium Alloy, Sheet and Strip 15Mo - 3.0AI - 2.8Cb - 0.20Si - UNS R58210 |
| 189 | SAE AIR1749A-2020 | 2020-12-01 | English | Aircraft Fuel System Pressure Definitions |
| 190 | SAE AIR5933-2020 | 2020-12-01 | English | Oxygen Sensor Technologies |
| 191 | SAE AS7515B-2020 | 2020-12-01 | English | COUPLING ASSEMBLY, THREADLESS - FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING |
| 192 | SAE J2534-2-2020 | 2020-12-01 | English | Optional Pass-Thru Features |
| 193 | SAE AMS2448C-2020 | 2020-12-01 | English | (R) Application of Tungsten Carbide Coatings on Ultra High Strength Steels High Velocity Oxygen / Fuel Process |
| 194 | SAE AMS6891/2-2020 | 2020-12-01 | English | Carbon Fiber and Fiberglass Epoxy/Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications: Type 40, Class 1, Grade 196, Style 6K-PW |
| 195 | SAE J1942-1-2020 | 2020-12-01 | English | Qualified Hoses for Marine Applications |
| 196 | SAE AMS2774G-2020 | 2020-12-01 | English | Heat Treatment Nickel Alloy and Cobalt Alloy Parts |
| 197 | SAE ARP6249-2020 | 2020-12-01 | English | Hydraulic Pump Minimum Inlet Pressure Test |
| 198 | SAE AMS4336C-2020 | 2020-12-01 | English | Aluminum Alloy, Extruded Rod, Bar, and Profiles (7055-T76511) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress-Relieved, and Overaged - UNS A97055 |
| 199 | SAE AMS5524M-2020 | 2020-12-01 | English | Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate 18Cr - 13Ni - 2.5Mo (SAE 30316) Solution Heat Treated - UNS S31600 |
| 200 | SAE AS6870-2020 | 2020-12-01 | English | Nondestructive Inspection Program Requirements for Aerospace Systems |
| 201 | SAE J1542-2020 | 2020-12-01 | English | (R) Laboratory Testing of Vehicle and Industrial Heat Exchangers for Thermal Cycle Durability |
| 202 | SAE AS7351B-2020 | 2020-12-01 | English | CLAMP, LOOP TYPE BONDING |
| 203 | SAE AS5131A-2020 | 2020-12-01 | English | (R) TUBE END - BEADED, DESIGN STANDARD |
| 204 | SAE AIR6016-2020 | 2020-12-01 | English | Description of High Lift Control Systems |
| 205 | SAE AS6342-2020 | 2020-12-01 | English | Minimum Operational Performance Standard (MOPS) for Helicopter Hoist Systems |
| 206 | SAE J3018-2020 | 2020-12-01 | English | (R) Safety-Relevant Guidance for On-Road Testing of Prototype Automated Driving System (ADS)-Operated Vehicles |
| 207 | SAE J2549-2020 | 2020-12-01 | English | Single Conductor Cable for Heavy-Duty Applications - Truck and Bus |
| 208 | SAE J1128-2020 | 2020-12-01 | English | Low Voltage Primary Cable |
| 209 | SAE J2540-2-2020 | 2020-12-01 | English | ITIS Phrase Lists (International Traveler Information Systems) |
| 210 | SAE J2540-2 SET-2020 | 2020-12-01 | English | ITIS Phrase Lists (International Traveler Information Systems)™ SET File - Includes Access to Additional Content |
| 211 | SAE J2540-2 ASN-2020 | 2020-12-01 | English | ITIS Phrase Lists (International Traveler Information Systems)™ ASN File - Includes Access to Additional Content |
| 212 | SAE AMS6413N-2020 | 2020-12-01 | English | Steel, Mechanical Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337) - UNS G43370 |
| 213 | SAE J2598-2020 | 2020-12-01 | English | Automotive Disc Brake Pad Natural Frequency and Damping Test |
| 214 | SAE J1410-2020 | 2020-12-01 | English | Air Brake Valve - Performance Requirements |
| 215 | SAE AS3217C-2020 | 2020-12-01 | English | RING, RETAINING-SPIRAL, INTERNAL LIGHT DUTY, CRES |
| 216 | SAE AMS2406P-2020 | 2020-12-01 | English | Plating, Chromium Hard Deposit |
| 217 | SAE AS6021A-2020 | 2020-12-01 | English | AS6021 Aerospace Fiber Optic Cable Assembly Drawing Specification |
| 218 | SAE ARP5898A-2020 | 2020-12-01 | English | Human Interface Criteria for Flight Deck Surface Operations Displays |
| 219 | SAE AIR1081A-2020 | 2020-12-01 | English | House Noise-Reduction Measurements for Use in Studies of Aircraft Flyover Noise |
| 220 | SAE AIR1935A-2020 | 2020-12-01 | English | Methods of Controlling Distortion of Inlet Airflow During Static Acoustical Tests of Turbofan Engines and Fan Rigs |
| 221 | SAE ARP921B-2020 | 2020-12-01 | English | Flight Test Procedures for Static Pressure Systems Installed in Subsonic Transport Aircraft |
| 222 | SAE AS8014A-2020 | 2020-12-01 | English | Minimum Performance Standard Stall Warning Equipment |
| 223 | SAE AS437B-2020 | 2020-12-01 | English | Maximum-Allowable-Airspeed Instruments (Turbine Powered Subsonic Aircraft) |
| 224 | SAE AS440B-2020 | 2020-12-01 | English | Automatic Pilots (Turbine Powered Subsonic Aircraft) |
| 225 | SAE AS8008A-2020 | 2020-12-01 | English | Flight Director Equipment |
| 226 | SAE ARP5430A-2020 | 2020-12-01 | English | Human Interface Criteria for Vertical Situation Awareness Displays |
| 227 | SAE ARP4055A-2020 | 2020-12-01 | English | Ground-Plane Microphone Configuration for Propeller-Driven Light-Aircraft Noise Measurement |
| 228 | SAE ARP1846B-2020 | 2020-12-01 | English | Measurement of Far Field Noise from Gas Turbine Engines During Static Operation |
| 229 | SAE AIR1672C-2020 | 2020-12-01 | English | Practical Methods to Obtain Free-Field Sound Pressure Levels from Acoustical Measurements Over Ground Surfaces |
| 230 | SAE ARP5621A-2020 | 2020-12-01 | English | Electronic Display of Aeronautical Information (Charts) |
| 231 | SAE AS6040A-2020 | 2020-12-01 | English | JAUS HMI Service Set |
| 232 | SAE ARP5365A-2020 | 2020-12-01 | English | Human Interface Criteria for Cockpit Display of Traffic Information |
| 233 | SAE MA2010A-2020 | 2020-12-01 | English | Packing, Preformed - O-Ring Seal Standard Sizes and Size Codes, Metric |
| 234 | SAE J1223-2020 | 2020-12-01 | English | Marine Carburetors and Fuel Injection Throttle Bodies |
| 235 | SAE ARP5364A-2020 | 2020-12-01 | English | Human Factor Considerations in the Design of Multifunction Display Systems for Civil Aircraft |
| 236 | SAE ARP5119A-2020 | 2020-12-01 | English | Location of and Display Symbology Requirements for Head-Down Electronic Flight Displays for Steep IMC Approaches |
| 237 | SAE USCAR-47-2020 | 2020-12-01 | English | Ergonomics Specification for Manually Seated Fasteners |
| 238 | SAE J1939DA-2020 | 2020-12-01 | English | J1939 Digital Annex - See Also SAE J1939; Includes Access to Additional Content |
| 239 | SAE AS3158B-2020 | 2020-12-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .3125-24 UNJF-3A |
| 240 | SAE AS14272A-2020 | 2020-12-01 | English | (R) CLAMP, LOOP, CUSHIONED, ELONGATED, METRIC |
| 241 | SAE AMS6891-2020 | 2020-12-01 | English | Carbon Fiber and Fiberglass Epoxy Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications |
| 242 | SAE J1939-17-2020 | 2020-12-01 | English | CAN FD Physical Layer, 500 kbps/2 Mbps |
| 243 | SAE J3039-2020 | 2020-12-01 | English | Definition and Measurement of Power Transfer Unit Speed-Dependent Parasitic Loss |
| 244 | SAE J1409-2020 | 2020-12-01 | English | Air Brake Valves Test Procedure |
| 245 | SAE AMS2403P-2020 | 2020-12-01 | English | Plating, Nickel General Purpose |
| 246 | SAE AS8050-2020 | 2020-12-01 | English | Connectors, Fiber Optic, Advanced, Circular, Modular or Rectangular, Plug and Receptacle, Harsh Environment, Removable Termini, General Specification for |
| 247 | SAE AIR6966-2020 | 2020-12-01 | English | Conducting Measurement Systems Analysis for Rotor Balancing Tasks |
| 248 | SAE AMS5950D-2020 | 2020-12-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Vacuum Induction and Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable - UNS N07719 |
| 249 | SAE AMS4161J-2020 | 2020-12-01 | English | Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged - UNS A96061 |
| 250 | SAE ARP785B-2020 | 2020-12-01 | English | (R) Procedure for the Determination of Particulate Contamination in Hydraulic Fluids by the Control Filter Gravimetric Procedure |
| 251 | SAE EPR2020023-2020 | 2020-11-30 | English | Unsettled Issues Regarding Communication of Automated Vehicles with Other Road Users - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 252 | SAE EPR2020024-2020 | 2020-11-30 | English | Unsettled Issues on Human-Robot Collaboration and Automation in Aerospace Manufacturing - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 253 | SAE AS4088F-2020 | 2020-11-01 | English | Aerospace Rod Scraper Gland Design Standard |
| 254 | SAE ARP7503-2020 | 2020-11-01 | English | Methods of Shield Termination for Two-Piece, Crimp-Style Ferrule on Shielded Cables |
| 255 | SAE AS23190D-2020 | 2020-11-01 | English | Wiring, Positioning, and Support Accessories |
| 256 | SAE J973-2020 | 2020-11-01 | English | (R) Ignition System Measurements Procedure |
| 257 | SAE AS22520/44A-2020 | 2020-11-01 | English | CRIMPING TOOL, TYPE II, WIRE HEATLESS TERMINATION, HAND ACTUATED, WIRE SIZES 26-12 |
| 258 | SAE USCAR-7-2-2020 | 2020-11-01 | English | DEEMBRITTLEMENT VERIFICATION TEST |
| 259 | SAE USCAR-6-1-2020 | 2020-11-01 | English | Standard for D.C. Brush Motor - HVAC Blowers - Revision 1 |
| 260 | SAE USCAR-11-2-2020 | 2020-11-01 | English | TORQUE-TENSION TESTING AND EVALUATION OF FASTENER FINISHES |
| 261 | SAE USCAR-32-1-2020 | 2020-11-01 | English | NEW FINISH DEVELOPMENT DOCUMENT |
| 262 | SAE USCAR-10-3-2020 | 2020-11-01 | English | TEST FOR EVALUATING THE TORQUE-TENSION RELATIONSHIP OF BOTH EXTERNAL AND INTERNAL METRIC THREADED FASTENERS |
| 263 | SAE J2288-2020 | 2020-11-01 | English | Life Cycle Testing of Electric Vehicle Battery Modules |
| 264 | SAE AS5590/1A-2020 | 2020-11-01 | English | CONNECTOR, FIBER OPTIC, CIRCULAR, ENVIRONMENT RESISTANT, REMOVEABLE TERMINI |
| 265 | SAE AS5590B-2020 | 2020-11-01 | English | Connectors, Fiber Optic, Advanced, Circular or Rectangular, Plug and Receptacle, Environment Resistant, Removable Termini/Contacts, General Specification For |
| 266 | SAE AMS4330D-2020 | 2020-11-01 | English | Aluminum Alloy, Plate (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.12Zr Solution Heat Treated, Stretched, and Artificially Aged - UNS A92297 |
| 267 | SAE AS7768/1B-2020 | 2020-11-01 | English | LIGHT, DESK, AIRCRAFT |
| 268 | SAE AIR744D-2020 | 2020-11-01 | English | Aerospace Auxiliary Power Sources |
| 269 | SAE J2728-2020 | 2020-11-01 | English | (R) Heavy Vehicle Event Data Recorder (HVEDR) |
| 270 | SAE J2727-2020 | 2020-11-01 | English | (R) Mobile Air Conditioning System Refrigerant Emission Charts for R-134a, R-1234yf, and R-152a - Includes Access to Additional Content |
| 271 | SAE J1628-2020 | 2020-11-01 | English | (R) Technician Procedures for Refrigerant Leak Detection in Service of Mobile Air Conditioning Systems |
| 272 | SAE ARP1232C-2020 | 2020-11-01 | English | Gland Design Criteria and Dimensions for Static Radial O-Ring Seal Applications Without Anti-Extrusion Devices Specifically for Engine and Engine Control Systems |
| 273 | SAE J2418-2020 | 2020-11-01 | English | Occupant Restraint Dynamic System Evaluation - Frontal Impact Heavy Trucks |
| 274 | SAE ARP4107A-2020 | 2020-11-01 | English | Aerospace Glossary for Human Factors Engineers |
| 275 | SAE ARP4033A-2020 | 2020-11-01 | English | Pilot-System Integration |
| 276 | SAE ARP4791B-2020 | 2020-11-01 | English | Human Engineering Recommendations for Data Link Systems |
| 277 | SAE ARP4153A-2020 | 2020-11-01 | English | Human Interface Criteria for Collision Avoidance Systems in Transport Aircraft |
| 278 | SAE ARP4155B-2020 | 2020-11-01 | English | Human Interface Design Methodology for Integrated Display Symbology |
| 279 | SAE ARP5056A-2020 | 2020-11-01 | English | Flight Crew Interface Considerations in the Flight Deck Design Process for Part 25 Aircraft |
| 280 | SAE USCAR-39-1-2020 | 2020-11-01 | English | STANDARD FOR TIRE TRACEABILITY CONTENT AND FORMAT FOR THE RADIO-FREQUENCY IDENTIFICATION (RFID) TAG AND ASSOCIATED TIRE DATA SET |
| 281 | SAE J990-2020 | 2020-11-01 | English | Nomenclature - Industrial and Agricultural Mowers |
| 282 | SAE ARP1234C-2020 | 2020-11-01 | English | Static Axial O-Ring Seal Applications Without Anti-Extrusion Devices for Engine and Engine Control Systems |
| 283 | SAE J639-2020 | 2020-11-01 | English | (R) Safety and Design Standards for Motor Vehicle Refrigerant Vapor Compression Systems |
| 284 | SAE AS5860C-2020 | 2020-11-01 | English | (R) Retainers (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Single Turn, Scarf-Cut, For Use in AS5857 Static Glands |
| 285 | SAE J2311-2020 | 2020-11-01 | English | Automatic Transmission Hydraulic Pump Test Procedure |
| 286 | SAE AS5197C-2020 | 2020-11-01 | English | (R) FITTING, TEE, FLARED TO PIPE ON SIDE |
| 287 | SAE AMS7022-2020 | 2020-11-01 | English | Binder Jet Additive Manufacturing (BJAM) Process |
| 288 | SAE AMS7021-2020 | 2020-11-01 | English | Precipitation Hardenable Steel Alloy, Corrosion and Heat Resistant, Powder for Additive Manufacturing, 15.0Cr - 4.5Ni - 3.5Cu - 0.30Nb - UNS S15500 |
| 289 | SAE AMS4480A-2020 | 2020-11-01 | English | Aluminum Alloy, Seamless Drawn Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged - UNS A96061 |
| 290 | SAE AS85049/52F-2020 | 2020-11-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, SELF-LOCKING AND NON-SELF-LOCKING, STRAIGHT, CATEGORY 4B (FOR AS50151 CRIMP, AS95234, MIL-DTL-26482) SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTOR |
| 291 | SAE J182-2020 | 2020-11-01 | English | Motor Vehicle Fiducial Marks and Three-Dimensional Reference System |
| 292 | SAE AMS7027-2020 | 2020-11-01 | English | Electron Beam Directed Energy Deposition-Wire Additive Manufacturing Process (EB-DED-Wire) |
| 293 | SAE AMS1424R-2020 | 2020-11-01 | English | Fluid, Aircraft Deicing/Anti-Icing, SAE Type I |
| 294 | SAE ARP6337-2020 | 2020-11-01 | English | Design, Manufacturing, and Performance Standard for Composite Materials Used on Aircraft Seat Structures |
| 295 | SAE J700-2020 | 2020-11-01 | English | Upper Coupler Kingpin - Commercial Trailers and Semitrailers |
| 296 | SAE AS9112C-2020 | 2020-11-01 | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI, .3125-24 UNJF-3A |
| 297 | SAE AS35061B-2020 | 2020-11-01 | English | CONNECTOR, RECEPTACLE EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC OPERATING POWER |
| 298 | SAE AS6470-2020 | 2020-11-01 | English | TEE, STANDARD REDUCER, EXTERNAL SWAGE ON RUN, MALE FLARELESS ON SIDE, HYDRAULIC |
| 299 | SAE MA3476A-2020 | 2020-11-01 | English | (R) BOLT, MACHINE - SPLINE EXTENDED WASHER, FULL HEAD, PD SHANK, LONG THREAD, NICKEL ALLOY (UNS N07718) - METRIC |
| 300 | SAE AS7475E-2020 | 2020-11-01 | English | (R) Bolts, Cobalt-Chromium-Nickel Alloy, UNS R30159, Tensile Strength 260 ksi, Procurement Specification |
| 301 | SAE AIR6325-2020 | 2020-11-01 | English | Fuel Level Point Sensing |
| 302 | SAE AIR8012-2020 | 2020-11-01 | English | Prognostics and Health Management Guidelines for Electro-Mechanical Actuators |
| 303 | SAE AIR1666C-2020 | 2020-11-01 | English | Performance Testing of Lubricant Filter Elements Utilized in Aircraft Power and Propulsion Lubrication Systems |
| 304 | SAE AMS2461-2020 | 2020-11-01 | English | Plating, Zinc-Nickel Alloy (12 to 16% Ni) |
| 305 | SAE AMS2431/9-2020 | 2020-11-01 | English | Peening Media Ceramic Shot, High Density |
| 306 | SAE AS3402B-2020 | 2020-11-01 | English | BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, NICKEL ALLOY (UNS N07001), .3125-24 UNJF-3A |
| 307 | SAE AS5861B-2020 | 2020-11-01 | English | (R) Retainers, (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Un-Cut, for Use in Static Glands to AS5857 |
| 308 | SAE AS9788B-2020 | 2020-11-01 | English | BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI MIN UTS, .5000-20 UNJF-3A |
| 309 | SAE AS25043F-2020 | 2020-11-01 | English | COVER, ELECTRICAL AS50151 CONNECTOR, RECEPTACLE, AN TYPE |
| 310 | SAE ARP6909-2020 | 2020-11-01 | English | Methods for Determining the Seat Reference Point (SRP) and the Buttock Reference Point (BRP) for Seats in Transport Aircraft, Civil Rotorcraft, and General Aviation Aircraft |
| 311 | SAE AS9808B-2020 | 2020-11-01 | English | BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CORROSION RESISTANT STEEL (UNS S17400) 140 KSI UTS MIN, .3750-24 UNJF-3A |
| 312 | SAE AS28772C-2020 | 2020-11-01 | English | (R) “D” RING SEAL FOR SHOCK STRUTS MOLDED FROM MIL-P-25732 ACRYLONITRILE BUTADIENE (NBR) MATERIAL |
| 313 | SAE AMS7725F-2020 | 2020-11-01 | English | Tungsten Heavy Alloy Shapes, Sintered, High Density |
| 314 | SAE AS9104/3A-2020 | 2020-11-01 | English | (R) Requirements for Aviation, Space, and Defense Auditor Training, Development, Competence, and Authentication |
| 315 | SAE USCAR-35-1-2020 | 2020-11-01 | English | TEST PROCEDURES FOR EVALUATING BOLT-LOAD RETENTION OF MAGNESIUM ALLOYS |
| 316 | SAE USCAR-40-2-2020 | 2020-11-01 | English | LEAD-FREE SOLDER VALIDATION TEST PLAN |
| 317 | SAE AS8049D-2020 | 2020-11-01 | English | Performance Standard for Seats in Civil Rotorcraft, Transport Aircraft, and General Aviation Aircraft |
| 318 | SAE USCAR-13-1-2020 | 2020-11-01 | English | STANDARD FOR IN-TANK ELECTRIC FUEL PUMPS |
| 319 | SAE ARP7495-2020 | 2020-11-01 | English | Methods to Address Specific Issues Related to COTS Electronic Components in Airborne Electronic Hardware |
| 320 | SAE EPR2020022-2020 | 2020-10-30 | English | Unsettled Issues Concerning the Opportunities and Challenges of eVTOL Applications during a Global Pandemic - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwid |
| 321 | SAE EPR2020020-2020 | 2020-10-30 | English | Unsettled Topics Concerning Autonomous Public Transportation Systems - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 322 | SAE EPR2020021-2020 | 2020-10-30 | English | Unsettled Topics Concerning Adopting Blockchain Technology in Aerospace - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 323 | SAE J3067-2020 | 2020-10-01 | English | Candidate Improvements to Dedicated Short Range Communications (DSRC) Message Set Dictionary [SAE J2735] Using Systems Engineering Methods |
| 324 | SAE J997-2020 | 2020-10-01 | English | Spark Arrester Test Carbon |
| 325 | SAE AMS3381B-2020 | 2020-10-01 | English | Sealing Compound, Flame Resistant, Non-Silicone |
| 326 | SAE AS3586B-2020 | 2020-10-01 | English | (R) PIN AND PLUG, EXPANSION, SET OF PARTS CRES, 303, LONG, UNS S30300 |
| 327 | SAE AS5419/9A-2020 | 2020-10-01 | English | WIRE, THERMOCOUPLE, SMOOTH SURFACE FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, NORMAL WEIGHT, 260 °C |
| 328 | SAE ARP1176B-2020 | 2020-10-01 | English | (R) Oxygen System and Component Cleaning |
| 329 | SAE AS6070A-2020 | 2020-10-01 | English | (R) Aerospace Cable, High Speed Data, Copper |
| 330 | SAE AMS2514B-2020 | 2020-10-01 | English | Anodic Coating on Aluminum Alloys Sulfuric Acid Process, Resin-Sealed |
| 331 | SAE AS3535C-2020 | 2020-10-01 | English | NUT, SELF-LOCKING, SHANK, UNS N07001 SILVER PLATE, UNJ THREAD |
| 332 | SAE AS3584B-2020 | 2020-10-01 | English | PIN AND PLUG, EXPANSION, SET OF PARTS CRES, 416 OR 416SE, LONG; STD AND .010 OVERSIZE DIAMETERS, UNS S41600/UNS S41623 |
| 333 | SAE AS5449A-2020 | 2020-10-01 | English | FITTING END, WELD RING, SHORT TAPERED, DESIGN STANDARD |
| 334 | SAE AMS6263N-2020 | 2020-10-01 | English | Steel Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) (9315) - UNS K44414 |
| 335 | SAE AS85720/1B-2020 | 2020-10-01 | English | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM SEAL, DESIGN STANDARD FOR MALE END |
| 336 | SAE MA4177A-2020 | 2020-10-01 | English | NUT, SELF LOCKING - HEX EXTENDED WASHER UNS N07001, SILVER PLATE, MJ THD, METRIC |
| 337 | SAE J3198-2020 | 2020-10-01 | English | Driver Drowsiness and Fatigue in the Safe Operation of Vehicles - Definition of Terms and Concepts |
| 338 | SAE J3081-2020 | 2020-10-01 | English | Heavy Vehicle Controls Prioritization and Conflict Resolution |
| 339 | SAE J2954-2020 | 2020-10-01 | English | (R) Wireless Power Transfer for Light-Duty Plug-in/Electric Vehicles and Alignment Methodology |
| 340 | SAE ARP6537-2020 | 2020-10-01 | English | Risk Mitigation for Pb-Free Solders Used Internally to Parts |
| 341 | SAE AS5419/8A-2020 | 2020-10-01 | English | WIRE, THERMOCOUPLE, SMOOTH SURFACE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 260 °C |
| 342 | SAE AIR5744-2020 | 2020-10-01 | English | Aircraft Thermal Management System Engineering |
| 343 | SAE J335-2020 | 2020-10-01 | English | Multiposition Small Engine Exhaust System Fire Ignition Suppression |
| 344 | SAE AIR6892-2020 | 2020-10-01 | English | Structural Health Monitoring Considerations and Guidance Specific to Rotorcraft |
| 345 | SAE J342-2020 | 2020-10-01 | English | Spark Arrester Test Procedure for Large Size Engines |
| 346 | SAE AMS6412P-2020 | 2020-10-01 | English | Steel, Bars and Forgings 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337) - UNS G43370 |
| 347 | SAE AS8992-2020 | 2020-10-01 | English | Fire Resistant Container Design, Performance, and Testing Requirements |
| 348 | SAE AMS6300H-2020 | 2020-10-01 | English | Steel Bars and Forgings 0.25Mo (0.35 - 0.40C) (SAE 4037) - UNS G40370 |
| 349 | SAE AIR7999-2020 | 2020-10-01 | English | Diagnostic and Prognostic Metrics for Aerospace Propulsion Health Management Systems |
| 350 | SAE ARP81490B-2020 | 2020-10-01 | English | Transmission Lines, Transverse Electromagnetic Mode |
| 351 | SAE MA3374E-2020 | 2020-10-01 | English | Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric |
| 352 | SAE J1939DA-2020 | 2020-10-01 | English | J1939 Digital Annex - See Also SAE J1939; Includes Access to Additional Content |
| 353 | SAE AIR810E-2020 | 2020-10-01 | English | Degradation Limits of MIL-PRF-5606, MIL-PRF-83282, and MIL-PRF-87257 Hydraulic Fluids Used in Hydraulic Test Stands |
| 354 | SAE J350-2020 | 2020-10-01 | English | Spark Arrester Test Procedure for Medium Size Engines |
| 355 | SAE AIR5871A-2020 | 2020-10-01 | English | (R) Prognostics for Aerospace Propulsion Systems |
| 356 | SAE AS3547B-2020 | 2020-10-01 | English | ASSEMBLY NUT AND CLIP, REMOVABLE SELF-LOCKING NUT, UNS S66286, CLASS 160 KSI/1200 ºF |
| 357 | SAE AMS6312K-2020 | 2020-10-01 | English | Steel Bars, Forgings, and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) - UNS K22440 |
| 358 | SAE AS3551A-2020 | 2020-10-01 | English | (R) O-Ring Molded from AMS7272 Butadiene-Acrylonitrile Rubber (NBR) |
| 359 | SAE AIR787B-2020 | 2020-10-01 | English | (R) Filter Element Cleaning Methods |
| 360 | SAE AS9951-2020 | 2020-10-01 | English | NUT, SPANNER-END SLOTS, CUPWASHER LOCKED ALLOY STEEL (UNS G87400) AS8879 THREADS |
| 361 | SAE J2568-2020 | 2020-10-01 | English | Intrusion Resistance of Safety Glazing Systems for Road Vehicles |
| 362 | SAE J1321-2020 | 2020-10-01 | English | Fuel Consumption Test Procedure - Type II - Includes Access to Additional Content |
| 363 | SAE AIR6345-2020 | 2020-10-01 | English | Processing and Validating CFD Data for Estimating Inlet Dynamic Total-Pressure Distortion |
| 364 | SAE AS6969A-2020 | 2020-10-01 | English | (R) Data Dictionary for Quantities Used in Cyber Physical Systems - Includes Access to Additional Content |
| 365 | SAE AMS2641D-2020 | 2020-10-01 | English | Vehicle, Magnetic Particle Inspection Petroleum Base |
| 366 | SAE AMS6907C-2020 | 2020-10-01 | English | Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Duplex Annealed - UNS R56260 |
| 367 | SAE AS9385A-2020 | 2020-10-01 | English | PACKING, PREFORMED, AMS7267, O-RING |
| 368 | SAE ARP5543A-2020 | 2020-10-01 | English | Aircraft Wheel Inflation Valves Incorporating an Inflation Pressure Gauge |
| 369 | SAE AIR1593-2020 | 2020-10-01 | English | (R) Clamp Loads and Bending Stresses in Aircraft Tubing Installations |
| 370 | SAE J348-2020 | 2020-10-01 | English | Wheel Chocks |
| 371 | SAE AIR5917-2020 | 2020-10-01 | English | Procedure for Measurement of Gaseous Emissions from Aircraft Gas Turbine Engines Using Fourier Transform Infrared Analysis |
| 372 | SAE EPR2020017-2020 | 2020-09-29 | English | Unsettled Topics on Nondestructive Testing of Additively Manufactured Parts in the Mobility Industry; (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES) - To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 373 | SAE EPR2020018-2020 | 2020-09-29 | English | Unsettled Technology Domains in Industrial Smart Assembly Tools Supporting Industry 4.0 - (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES): To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 374 | SAE AMS2769D-2020 | 2020-09-01 | English | Heat Treatment of Parts in a Vacuum |
| 375 | SAE J2912-2020 | 2020-09-01 | English | (R) Performance Requirements for R-134a and R-1234yf Refrigerant Diagnostic Identifiers (RDI) for Use with Mobile Air Conditioning Systems |
| 376 | SAE AS9712B-2020 | 2020-09-01 | English | SCREW, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, NICKEL ALLOY (UNS N07001), .1380-40 UNJF-3A |
| 377 | SAE AMS2759/5F-2020 | 2020-09-01 | English | Heat Treatment Martensitic Corrosion-Resistant Steel Parts |
| 378 | SAE AS36100C-2020 | 2020-09-01 | English | Air Cargo Unit Load Devices - Performance Requirements and Test Parameters |
| 379 | SAE AS568F-2020 | 2020-09-01 | English | Aerospace Size Standard for O-Rings |
| 380 | SAE J2847/6-2020 | 2020-09-01 | English | (R) Communication for Wireless Power Transfer Between Light-Duty Plug-in Electric Vehicles and Wireless EV Charging Stations |
| 381 | SAE AIR790D-2020 | 2020-09-01 | English | (R) Considerations on Ice Formation in Aircraft and Engine Fuel Systems |
| 382 | SAE AS4209D-2020 | 2020-09-01 | English | FITTING END ASSEMBLY, INTERNAL THREAD, RETAINED NUT, BEAM SEAL, DESIGN STANDARD |
| 383 | SAE SAE1010-2020 | 2020-09-01 | English | Standard Practice for Manpower and Personnel |
| 384 | SAE J365-2020 | 2020-09-01 | English | (R) Method of Testing Resistance to Scuffing of Trim Materials |
| 385 | SAE AIR7501-2020 | 2020-09-01 | English | Aircraft Asset Lifecycle and Digital Data Standards Overview |
| 386 | SAE AIR6820A-2020 | 2020-09-01 | English | Electrical Wiring Fuel Compatibility |
| 387 | SAE AMS5500G-2020 | 2020-09-01 | English | Steel, Corrosion-Resistant, Laminated, Sheet Surface Bonded - UNS S30200 |
| 388 | SAE AMS4323D-2020 | 2020-09-01 | English | Aluminum Alloy, Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated - UNS A97075 |
| 389 | SAE AMS3265F-2020 | 2020-09-01 | English | (R) Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting for Intermittent Use to 360 °F (182 °C) |
| 390 | SAE ARP6344-2020 | 2020-09-01 | English | Standard Test Procedure and Limit Value for Shutoff Surge Pressure for Fixed Pressure Fuel Dispensing Systems |
| 391 | SAE J3204-2020 | 2020-09-01 | English | Aftermarket Composite Wheels Made of Matrix Material and Fiber Reinforcement Intended for Normal Highway Use - Test Procedures and Performance Requirements |
| 392 | SAE J1374-2020 | 2020-09-01 | English | Hydraulic Cylinder Rod Seal Endurance Test Procedure |
| 393 | SAE J1101-2020 | 2020-09-01 | English | Test Procedure for Parking Stability of Motorcycles |
| 394 | SAE AS9759B-2020 | 2020-09-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, AMS4967 (TI 6AL-4V), .1900-32 UNJF-3A |
| 395 | SAE AS85049/41E-2020 | 2020-09-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, NON-ENVIRONMENTAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (FOR AS50151 SOLDER TYPE, V THREAD OF MS310X, CLASSES A, B, C, OR K CONNECTORS AND AS85049 ACCESSORIES) |
| 396 | SAE ARP6299-2020 | 2020-09-01 | English | Procedure for Thermal Aging Test for Polyol Ester Gas Turbine Engine Lubricants |
| 397 | SAE AMS6358L-2020 | 2020-09-01 | English | Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) - UNS G87400 |
| 398 | SAE AS3169B-2020 | 2020-09-01 | English | BOLT, MACHINE-DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140KSI UTS MIN, .3125-24, UNJF-3A |
| 399 | SAE AS3143C-2020 | 2020-09-01 | English | STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, UNS S66286 .5000-20 UNJF-3A X .4375-20 UNJF-3A |
| 400 | SAE AS3107B-2020 | 2020-09-01 | English | BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .1900-32 UNJF-3A |
| 401 | SAE AS29606A-2020 | 2020-09-01 | English | Wire, Electrical, Stranded, Uninsulated Copper, Copper Alloy, or Aluminum, or Thermocouple Extension, General Specification for |
| 402 | SAE AS3483C-2020 | 2020-09-01 | English | NUT, SELF LOCKING, HEXAGON, REGULAR HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F |
| 403 | SAE AMS-H-6875C-2020 | 2020-09-01 | English | Heat Treatment of Steel Raw Materials |
| 404 | SAE AS85049/143B-2020 | 2020-09-01 | English | CONNECTOR ACCESSORIES, BACKSHELL, STRAIN RELIEF, CATEGORY 4C (FOR AS81714, SIZE 22, 20, AND 16 TERMINAL JUNCTION BLOCKS) |
| 405 | SAE AS39029/54A-2020 | 2020-09-01 | English | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-DTL-26500 AND MIL-DTL-26518 CONNECTORS) |
| 406 | SAE AS8660A-2020 | 2020-09-01 | English | Silicone Compound NATO Code Number S-736 |
| 407 | SAE J617-2020 | 2020-09-01 | English | Engine Flywheel Housing and Mating Transmission Housing Flanges |
| 408 | SAE AS3067C-2020 | 2020-09-01 | English | NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, AS7251 |
| 409 | SAE AS3066C-2020 | 2020-09-01 | English | NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, AMS 7251 |
| 410 | SAE AS3070A-2020 | 2020-09-01 | English | NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, AMS7251 |
| 411 | SAE AS81969/21A-2020 | 2020-09-01 | English | INSTALLING AND REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACTS, INTERFACIAL SEAL, TYPE III, CLASS 1, COMPOSITION A |
| 412 | SAE AS81969/28A-2020 | 2020-09-01 | English | REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 2, COMPOSITION C, REMOVAL TOOL ONLY |
| 413 | SAE AMS3248D-2020 | 2020-09-01 | English | Ethylene Propylene (EPM) Rubber Phosphate Ester Resistant 55 - 65 |
| 414 | SAE AMS6477D-2020 | 2020-09-01 | English | Steel, Bars, Forgings, and Tubing 0.80Cr (0.90 - 1.03C) For Bearing Applications - UNS G51985 |
| 415 | SAE ARP4402A-2020 | 2020-09-01 | English | (R) Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure |
| 416 | SAE EPR2020016-2020 | 2020-08-31 | English | Unsettled Issues Regarding Policy Aspects of Automated Driving Systems; (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES) - To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 417 | SAE EPR2020019-2020 | 2020-08-31 | English | Unsettled Technology Domains for Rapid and Automated Verification of Industry 4.0 Machine Tools; (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES) - To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 418 | SAE EPR2020013-2020 | 2020-08-31 | English | Unsettled Topics Concerning Airworthiness Cybersecurity Regulation; (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES) - To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 419 | SAE EPR2020015-2020 | 2020-08-05 | English | Unsettled Issues Facing Automated Vehicles and Insurance; (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES) - To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 420 | SAE AS4862B-2020 | 2020-08-01 | English | (R) FITTING, PLUG, PIPE, EXTERNAL THREAD, HEX HEAD |
| 421 | SAE AMS5878E-2020 | 2020-08-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 59Ni - 22Cr - 2Mo - 14W - 0.35AI - 0.03La Solution Heat Treated - UNS N06230 |
| 422 | SAE J2384-2020 | 2020-08-01 | English | Air Dryer Test Procedure |
| 423 | SAE AS1036K-2020 | 2020-08-01 | English | FITTING, CROSS, STANDARD AND REDUCER, FLARED |
| 424 | SAE AMS4160J-2020 | 2020-08-01 | English | Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed - UNS A96061 |
| 425 | SAE AMS4117L-2020 | 2020-08-01 | English | Aluminum Alloy, Rolled or Cold Finished, Bars, Rods, and Wire and Flash Welded Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6, -T651) - UNS A96061 |
| 426 | SAE AMS4090G-2020 | 2020-08-01 | English | Aluminum Alloy, Plate 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T651) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated - UNS A97475 |
| 427 | SAE AS5134C-2020 | 2020-08-01 | English | (R) Aviation Visual Distress Signals (AVDS) |
| 428 | SAE AS4842/2B-2020 | 2020-08-01 | English | Fittings, Flareless to Pipe Threaded, Fluid Connection |
| 429 | SAE AS4492A-2020 | 2020-08-01 | English | (R) Survivor Locator Lights |
| 430 | SAE AS39029/22E-2020 | 2020-08-01 | English | CONTACTS, ELECTRICAL, CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR AS81714 TERMINAL JUNCTION SYSTEM SERIES II) |
| 431 | SAE AS8617-2020 | 2020-08-01 | English | Balancing Machines - Verification Test Requirements |
| 432 | SAE AS7378-2020 | 2020-08-01 | English | Test Method for Condition in Container of Liquid Organic Coating Components |
| 433 | SAE AMS4924J-2020 | 2020-08-01 | English | Titanium Alloy Bars, Forgings, and Rings 5Al - 2.5Sn, Extra Low Interstitial Annealed - UNS R54521 |
| 434 | SAE AMS4909L-2020 | 2020-08-01 | English | Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn, Extra Low Interstitial Annealed - UNS R54521 |
| 435 | SAE AS3481H-2020 | 2020-08-01 | English | (R) NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F |
| 436 | SAE AS3246E-2020 | 2020-08-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A |
| 437 | SAE AMS5622G-2020 | 2020-08-01 | English | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable Consumable Electrode Remelted - UNS S17400 |
| 438 | SAE J3160-2020 | 2020-08-01 | English | Recommended Practice for Improving Measurement Quality of Particle Number Counting Devices |
| 439 | SAE J2115-2020 | 2020-08-01 | English | (R) Air Brake Performance and Wear Test Code Commercial Vehicle Inertia Dynamometer |
| 440 | SAE AMS4448-2020 | 2020-08-01 | English | Aluminum Alloy, Plate (7160-T7351) 7.0Zn - 2.2Cu - 1.5Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged |
| 441 | SAE AMS4404B-2020 | 2020-08-01 | English | Aluminum Alloy, Extruded Profiles (6056-T4511) 1.0Si - 0.90Mg - 0.80Cu - 0.60Mn - 0.40Zn Solution Heat Treated and Stress-Relieved by Stretching - UNS A96056 |
| 442 | SAE AMS4347E-2020 | 2020-08-01 | English | Aluminum Alloy Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4) Solution Heat Treated and Naturally Aged - UNS A96013 |
| 443 | SAE AMS4201G-2020 | 2020-08-01 | English | Aluminum Alloy Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated, Stress Relieved, and Overaged - UNS A97050 |
| 444 | SAE AMS2770R-2020 | 2020-08-01 | English | Heat Treatment of Wrought Aluminum Alloy Parts |
| 445 | SAE AMS4037R-2020 | 2020-08-01 | English | Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Treated - UNS A92024 |
| 446 | SAE AIR6897-2020 | 2020-08-01 | English | Battery Management Systems for Rechargeable Lithium Batteries Used in Aerospace Standards |
| 447 | SAE AS6522A-2020 | 2020-08-01 | English | (R) Unmanned Systems (UxS) Control Segment (UCS) Architecture: Architecture Technical Governance |
| 448 | SAE AS7473D-2020 | 2020-08-01 | English | Bolts and Screws, Roll Threaded Procurement Specification for |
| 449 | SAE J2031-2020 | 2020-08-01 | English | High-Tension Ignition Cable |
| 450 | SAE EIA-649-1A-2020 | 2020-08-01 | English | (R) Configuration Management Requirements for Defense Contracts |
| 451 | SAE USCAR-33-2020 | 2020-08-01 | English | Specification for Testing Automotive LED Modules - Revision 1 |
| 452 | SAE AMS4153M-2020 | 2020-08-01 | English | Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated - UNS A92014 |
| 453 | SAE AMS5706N-2020 | 2020-08-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F Solution Heat Treated - UNS N07001 |
| 454 | SAE AMS5667P-2020 | 2020-08-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable - UNS N07750 |
| 455 | SAE AMS4907M-2020 | 2020-08-01 | English | Titanium Alloy, Sheet, Strip, and Plate 6.0Al - 4.0V, Extra Low Interstitial Annealed - UNS R56401 |
| 456 | SAE AS5270A-2020 | 2020-08-01 | English | (R) Bolts, Screws and Studs, Nickel Alloy, UNS N07718 Work-Strengthened, Tensile Strength 220 ksi Procurement Specification |
| 457 | SAE EIA-933C-2020 | 2020-08-01 | English | (R) Requirements for a COTS Assembly Management Plan |
| 458 | SAE AS897F-2020 | 2020-08-01 | English | FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD |
| 459 | SAE AS3139C-2020 | 2020-08-01 | English | (R) STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, UNS S66286 .2500-28 UNJF-3A X .1900-32 UNJF-3A |
| 460 | SAE J2403-2020 | 2020-08-01 | English | Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature |
| 461 | SAE AS896D-2020 | 2020-08-01 | English | FITTING, NIPPLE, REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD |
| 462 | SAE J2039-2020 | 2020-08-01 | English | (R) Side Turn Signal Lamp for Long Vehicles |
| 463 | SAE AS59158A-2020 | 2020-08-01 | English | Tools, Inserting and Extracting Helical Coil Wire Screw Thread Inserts Inch and Spark Plug Sizes |
| 464 | SAE J1798/1-2020 | 2020-08-01 | English | Recommended Practice for Performance Rating of Lead Acid and Nickel Metal Hydride Electric Vehicle Battery Modules |
| 465 | SAE AIR6825-2020 | 2020-08-01 | English | Identification and Assessment of Damage to Composite Aircraft Structures Training Documen |
| 466 | SAE AS5900D-2020 | 2020-08-01 | English | (R) Standard Test Method for Aerodynamic Acceptance of AMS1424 and AMS1428 Aircraft Deicing/Anti-Icing Fluids |
| 467 | SAE AMS5704L-2020 | 2020-08-01 | English | Nickel Alloy, Corrosion and Heat Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.6Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation Heat Treated |
| 468 | SAE AS10380A-2020 | 2020-08-01 | English | (R) COUPLING INSTALLATIONS, STANDARD CONDUIT, ELECTRICAL |
| 469 | SAE AS5528E-2020 | 2020-08-01 | English | Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting |
| 470 | SAE J3070-2020 | 2020-08-01 | English | Power Cylinder Scuffing: Mechanisms |
| 471 | SAE J3300/1-2020 | 2020-08-01 | English | Low Mu/Winter Driving Skill Certification |
| 472 | SAE J2111-2020 | 2020-08-01 | English | Headlamp Cleaners |
| 473 | SAE AS81969/22A-2020 | 2020-08-01 | English | REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACT (CRIMP REMOVABLE), TYPE II, CLASS 1, COMPOSITION A |
| 474 | SAE ARP5647B-2020 | 2020-08-01 | English | High Intensity Discharge Light Sources |
| 475 | SAE AS9771A-2020 | 2020-08-01 | English | PACKING, PREFORMED - AMS3650, SEAL |
| 476 | SAE J2735SET-2020 | 2020-07-23 | English | Dedicated Short Range Communications (DSRC) Message Set Dictionary Set - See Also SAE J2735; Includes Access to Additional Content |
| 477 | SAE EPR2020014-2020 | 2020-07-22 | English | Unsettled Technology Domains for Pathways to Automotive Decarbonization; (AN SAE EDGE RESEARCH REPORT - CONNECTED AND AUTOMATED VEHICLE TECHNOLOGIES) - To Purchase call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 478 | SAE AS3480E-2020 | 2020-07-01 | English | (R) NUT, SELF-LOCKING, PLATE, ONE LUG, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F |
| 479 | SAE AMS7201-2020 | 2020-07-01 | English | Standard Contaminant for Testing Aerospace Cleaners |
| 480 | SAE ARP5644A-2020 | 2020-07-01 | English | (R) Landing Gear Shock Absorption Testing of Civil Aircraft |
| 481 | SAE AMS3819D-2020 | 2020-07-01 | English | (R) Cloths, Cleaning For Aircraft Primary and Secondary Structural Surfaces |
| 482 | SAE AS6512A-2020 | 2020-07-01 | English | (R) Unmanned Systems (UxS) Control Segment (UCS) Architecture: Architecture Description |
| 483 | SAE AMS5873G-2020 | 2020-07-01 | English | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La Consumable Electrode Remelted, Solution Heat Treated - UNS N06635 |
| 484 | SAE AMS7490R-2020 | 2020-07-01 | English | Rings, Flash Welded Corrosion and Heat-Resistant Austenitic Steels, Austenitic-Type Iron, Nickel or Cobalt Alloys, or Precipitation-Hardenable Alloys |
| 485 | SAE AMS4025N-2020 | 2020-07-01 | English | Aluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed - UNS A96061 |
| 486 | SAE AS6513A-2020 | 2020-07-01 | English | (R) Unmanned Systems (UxS) Control Segment (UCS) Architecture: Conformance Specification |
| 487 | SAE AMS7274K-2020 | 2020-07-01 | English | (R) Rubber: Acrylonitrile-Butadiene (NBR) Engine Oil Resistance, 65 to 75 Hardness, for Seals in Aircraft Engine Oil Systems |
| 488 | SAE AMS2761-2020 | 2020-07-01 | English | Heat Treatment of Steel Raw Materials |
| 489 | SAE AMS4159F-2020 | 2020-07-01 | English | Aluminum Alloy, Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T76511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged - UNS A97049 |
| 490 | SAE AMS6281K-2020 | 2020-07-01 | English | Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.33C) (SAE 8630) - UNS G86300 |
| 491 | SAE J2945/1A-2020 | 2020-07-01 | English | Vehicle Level Validation Test Procedures for V2V Safety Communications |
| 492 | SAE AS39029/1D-2020 | 2020-07-01 | English | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS81714 TERMINAL JUNCTION SYSTEM) |
| 493 | SAE J2992-2020 | 2020-07-01 | English | FTIR Gas Analyzer Performance Evaluation/Qualification for Automotive Testing |
| 494 | SAE AS5127/2C-2020 | 2020-07-01 | English | Test Method for Aerospace Firewall Sealant Flame Penetration |
| 495 | SAE AS10051A-2020 | 2020-07-01 | English | (R) Hubs, Conduit Connection, Standard Dimensions |
| 496 | SAE AMS4982G-2020 | 2020-07-01 | English | Titanium Alloy Wire 44.5 Cb - UNS R58450 |
| 497 | SAE AMS4331A-2020 | 2020-07-01 | English | Aluminum Alloy Extrusions 7.8Zn - 2.6Mg - 2.0Cu - 0.10Zr - (7068-T6511) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated |
| 498 | SAE AMS4216C-2020 | 2020-07-01 | English | Aluminum Alloy, Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T6) Solution Heat Treated and Artificially Aged - UNS A96013 |
| 499 | SAE AMS4162F-2020 | 2020-07-01 | English | Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated, Stress Relief Stretched, Straightened, and Precipitation Heat Treated - UNS A92219 |
| 500 | SAE AMS7007-2020 | 2020-07-01 | English | Electron Beam Powder Bed Fusion Process |
|