| Pos | standard Number | publication date | Language | Description |
| 1 | SAE/TP 2008-01-2189-2008 | 2008-06-29 | English | Design Status of the Closed-Loop Air Revitalization System ARES for Accommodation on the ISS |
| 2 | SAE/TP 2008-01-2188-2008 | 2008-06-29 | English | The Prospects for Development of Regenerative Life Support Systems of Space and Planetary Stations |
| 3 | SAE/TP 2008-01-2187-2008 | 2008-06-29 | English | Considerations Regarding the Development of an Environmental Control and Life Support System for Lunar Surface Applications |
| 4 | SAE/TP 2008-01-2186-2008 | 2008-06-29 | English | Prototype BLSS Lunar Habitat |
| 5 | SAE/TP 2008-01-2185-2008 | 2008-06-29 | English | Life Support System Technology Development Supporting Human Space Exploration |
| 6 | SAE/TP 2008-01-2184-2008 | 2008-06-29 | English | Lunar Base Life Support Mass Flow and Recycling |
| 7 | SAE/TP 2008-01-2183-2008 | 2008-06-29 | English | International Space Station Environmental Control and Life Support System Acceptance Testing for Node 1 Water Recovery and Management Subsystems |
| 8 | SAE/TP 2008-01-2182-2008 | 2008-06-29 | English | International Space Station Environmental Control and Life Support System Acceptance Testing for the Pressurized Mating Adapters |
| 9 | SAE/TP 2008-01-2178-2008 | 2008-06-29 | English | International Space Station Environmental Control and Life Support System Changes for Increasing the ISS Crew Size to Six Crew Members and for Shuttle Retirement |
| 10 | SAE/TP 2008-01-2177-2008 | 2008-06-29 | English | Using Sweetpotato Peels in Breadmaking as a Source of Dietary Fiber for Space Diets |
| 11 | SAE/TP 2008-01-2176-2008 | 2008-06-29 | English | Identification of Styrene and Hexanol During Baking of Sweetpotato Bread in a Closed Chamber |
| 12 | SAE/TP 2008-01-2099-2008 | 2008-06-29 | English | Hydrogen Recovery by Methane Decomposition in a Microwave Plasma Reactor |
| 13 | SAE/TP 2008-01-2100-2008 | 2008-06-29 | English | Trace Contaminant Removal by Atmospheric Pressure Plasma Discharges |
| 14 | SAE/TP 2008-01-2101-2008 | 2008-06-29 | English | Further Testing of an Amine-Based Pressure-Swing System for Carbon Dioxide and Humidity Control |
| 15 | SAE/TP 2008-01-2102-2008 | 2008-06-29 | English | Information Alignment and Knowledge Synchronization in Spaceflight Operations |
| 16 | SAE/TP 2008-01-2103-2008 | 2008-06-29 | English | The First Development of Human Factors Engineering Requirements for Application to Ground Task Design for a NASA Flight Program |
| 17 | SAE/TP 2008-01-2104-2008 | 2008-06-29 | English | Lunar and Mars Exploration: The Autonomy Factor |
| 18 | SAE/TP 2008-01-2105-2008 | 2008-06-29 | English | A Parabolic Flight Study of the Mobile Information System |
| 19 | SAE/TP 2008-01-2106-2008 | 2008-06-29 | English | Supporting Constellation Mission Training from Crew to Controllers |
| 20 | SAE/TP 2008-01-2108-2008 | 2008-06-29 | English | Perceptual Challenges of Lunar Operations |
| 21 | SAE/TP 2008-01-2175-2008 | 2008-06-29 | English | Responses of Zucker Fatty Rats to a Sweetpoato [Ipomoea batatas (L.) Lam] Starch Syrup |
| 22 | SAE/TP 2008-01-2109-2008 | 2008-06-29 | English | Conceptual Approach for Stress Estimates Among Astronauts and Cosmonauts |
| 23 | SAE/TP 2008-01-2110-2008 | 2008-06-29 | English | A Portable Unit to Measure Metabolic Rate During Shirtsleeve and Suited EVA Tests |
| 24 | SAE/TP 2008-01-2111-2008 | 2008-06-29 | English | A Freezable Heat Exchanger for Space Suit Radiator Systems |
| 25 | SAE/TP 2008-01-2112-2008 | 2008-06-29 | English | Lightweight, Flexible, and Freezable Heat Pump/Radiator for EVA Suits |
| 26 | SAE/TP 2008-01-2174-2008 | 2008-06-29 | English | Evaluation of Amylose/Amylopectin, Dietary Fiber, Sugar and Vitamin C in Two Processed and Unprocessed Hydroponic Sweetpotato Cultivars |
| 27 | SAE/TP 2008-01-2173-2008 | 2008-06-29 | English | Evaluation of Nutritional Properties and Consumer Acceptance of Hydroponic Carrots (Daucus carota L.) Grown Under Different Light Intensities and CO2 Concentrations |
| 28 | SAE/TP 2008-01-1990-2008 | 2008-06-29 | English | Trade Study of an Interface for a Removable/Replaceable Thermal Micrometeoroid Garment |
| 29 | SAE/TP 2008-01-2172-2008 | 2008-06-29 | English | Life Support Systems for Lunar Landers |
| 30 | SAE/TP 2008-01-2171-2008 | 2008-06-29 | English | Thermo-mechanical Design and Plasma Test Verification on PARES CMC Nose Cap |
| 31 | SAE/TP 2008-01-2170-2008 | 2008-06-29 | English | Spacecraft Radiator Freeze Protection Using a Regenerative Heat Exchanger with Bypass Setpoint Temperature Control |
| 32 | SAE/TP 2008-01-2169-2008 | 2008-06-29 | English | Design of a Sublimator Driven Coldplate Development Unit |
| 33 | SAE/TP 2008-01-2168-2008 | 2008-06-29 | English | Development Status of the Contaminant Insensitive Sublimator |
| 34 | SAE/TP 2008-01-2167-2008 | 2008-06-29 | English | Testing of a Compact Flash Evaporator System for Exploration |
| 35 | SAE/TP 2008-01-2166-2008 | 2008-06-29 | English | Testing of the Multi-Fluid Evaporator Prototype |
| 36 | SAE/TP 2008-01-2165-2008 | 2008-06-29 | English | Testing of an R134a Spray Evaporative Heat Sink |
| 37 | SAE/TP 2008-01-2164-2008 | 2008-06-29 | English | A Fresh Look at Radiation Exposures from Major Solar Proton Events |
| 38 | SAE/TP 2008-01-2163-2008 | 2008-06-29 | English | Shielding Effectiveness of Sodium Alanate and Ammonia Borane for Galactic Cosmic Ray and Solar Energetic Particle Event Environments |
| 39 | SAE/TP 2008-01-2162-2008 | 2008-06-29 | English | Neutron Transport Models and Methods for HZETRN and Coupling to Low Energy Light Ion Transport |
| 40 | SAE/TP 2008-01-2161-2008 | 2008-06-29 | English | Radiation Shielding for Space Exploration: the MoMa – COUNT Programme |
| 41 | SAE/TP 2008-01-2160-2008 | 2008-06-29 | English | Ultra Reliable Space Life Support Systems |
| 42 | SAE/TP 2008-01-2159-2008 | 2008-06-29 | English | ISS IATCS Coolant Loop Biocide Implementation |
| 43 | SAE/TP 2008-01-2158-2008 | 2008-06-29 | English | Selenium Coating of Water Distribution Tubing to Inhibit Biofilm |
| 44 | SAE/TP 2008-01-2156-2008 | 2008-06-29 | English | Certifying the Dream, The Story of Zero-G |
| 45 | SAE R-366-2008 | 2008-06-19 | English | Road Vehicle Dynamics - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 46 | SAE/TP 2008-01-1863-2008 | 2008-06-17 | English | Design Optimization of Airline Seats |
| 47 | SAE ISO 9244-2008 | 2008-06-15 | English | Earth-moving machinery — Machine safety labels — General principles - Second Edition |
| 48 | SAE J1212-2008 | 2008-06-01(R 2015) | English | Fire Prevention on Forestry Machinery |
| 49 | SAE AS1790H-2008 | 2008-06-01(R 2015) | English | NUT, FITTING, RETAINED, LIGHTWEIGHT(DoD Adopted) |
| 50 | SAE AMS4082P-2008 | 2008-06-01(R 2014) | English | Aluminum Alloy, Seamless Drawn Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated - UNS A96061(DoD Adopted) |
| 51 | SAE AMS4081J-2008 | 2008-06-01(R 2014) | English | Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged - UNS A96061(DoD Adopted) |
| 52 | SAE AMS4280J-2008 | 2008-06-01(R 2014) | English | Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.5Mg (355.0-T71) Solution Heat Treated and Overaged - UNS A03550 |
| 53 | SAE AMS4281G-2008 | 2008-06-01(R 2014) | English | Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated - UNS A03550(DoD Adopted) |
| 54 | SAE AMS4260G-2008 | 2008-06-01(R 2014) | English | Aluminum Alloy, Investment Castings 1.0Si - 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated - UNS A03560 |
| 55 | SAE AMS5397D-2008 | 2008-06-01(R 2014) | English | (R) Alloy Castings, Investment, Corrosion and Heat-Resistant 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015B - 0.95V - 0.06Zr Vacuum Melted, Vacuum Cast As Cast - UNS N13100(DoD Adopted) |
| 56 | SAE AMS2950/1-2008 | 2008-06-01(R 2014) | English | Paste Adhesive for Core Restoration Part 1 - General Requirements |
| 57 | SAE AMS2816W-2008 | 2008-06-01(R 2013) | English | Identification Welding Wire, Tab Marking Method |
| 58 | SAE AMS2380F-2008 | 2008-06-01(R 2013) | English | Approval and Control of Premium-Quality Titanium Alloys |
| 59 | SAE AMS4063E-2008 | 2008-06-01(R 2013) | English | Aluminum Alloy, Clad One Side, Sheet 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet) Annealed - UNS A83003 |
| 60 | SAE AS7928/5A-2008 | 2008-06-01(R 2013) | English | (R) TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC (PERMANENT, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE |
| 61 | SAE AIR887C-2008 | 2008-06-01(R 2013) | English | (R) Liquid Filter Ratings, Parameters and Tests |
| 62 | SAE AIR5871-2008 | 2008-06-01(R 2013) | English | Prognostics for Gas Turbine Engines |
| 63 | SAE AMS4214J-2008 | 2008-06-01(R 2013) | English | Castings, Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and Overaged - UNS A03550 |
| 64 | SAE AS21900C-2008 | 2008-06-01 | English | ADAPTER, FLARELESS TUBE TO A FLARED TUBE
DoD Adopted |
| 65 | SAE AS21908D-2008 | 2008-06-01 | English | ELBOW, BULKHEAD UNIVERSAL 90掳, FLARELESS TUBE
DoD Adopted |
| 66 | SAE AS4228B-2008 | 2008-06-01 | English | FITTING, ADAPTER, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING |
| 67 | SAE AMS2242G-2008 | 2008-06-01 | English | Tolerances Corrosion and Heat Resistant Steel, Iron Alloy, Titanium and Titanium Alloy Sheet, Strip, and Plate |
| 68 | SAE AS21911C-2008 | 2008-06-01 | English | TEE, BULKHEAD, FLARELESS TUBE, INTERNAL THREAD ON RUN
DoD Adopted |
| 69 | SAE AS21912C-2008 | 2008-06-01 | English | TEE, FLARELESS TUBE WITH BULKHEAD ON RUN
DoD Adopted |
| 70 | SAE AS21926B-2008 | 2008-06-01 | English | ELBOW, 90掳 UNIVERSAL, FLARELESS TUBE, LOW PROFILE
DoD Adopted |
| 71 | SAE J1212-2008 | 2008-06-01 | English | Fire Prevention on Forestry Machinery |
| 72 | SAE AS 21913C-2008 | 2008-06-01 | 英语 | PLUG, FLARELESS TUBE |
| 73 | SAE AS21906C-2008 | 2008-06-01 | English | CROSS, FLARELESS TUBE
DoD Adopted |
| 74 | SAE AS21905C-2008 | 2008-06-01 | English | TEE, FLARELESS TUBE
DoD Adopted |
| 75 | SAE AS21904C-2008 | 2008-06-01 | English | ELBOW, FLARELESS TUBE, 90掳
DoD Adopted |
| 76 | SAE AS21907C-2008 | 2008-06-01 | English | ELBOW, BULKHEAD UNIVERSAL, 45掳, FLARELESS TUBE
DoD Adopted |
| 77 | SAE AS21902C-2008 | 2008-06-01 | English | UNION, FLARELESS TUBE
DoD Adopted |
| 78 | SAE AS7928/5A-2008 | 2008-06-01 | English | (R) TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC (PERMANENT, TYPE II, CLASS 1) FOR 105 掳C TOTAL CONDUCTOR TEMPERATURE
DoD Adopted |
| 79 | SAE AS21916D-2008 | 2008-06-01 | English | REDUCER, EXTERNAL THREAD, FLARELESS TUBE
DoD Adopted |
| 80 | SAE AS5803-2008 | 2008-06-01 | English | FITTING ASSEMBLY, 45掳 ELBOW, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| 81 | SAE AMS6387A-2008 | 2008-06-01 | English | Steel, Carbon, Laminated Sheet, Surface Bonded |
| 82 | SAE AS681J-2008 | 2008-06-01 | English | (R) Gas Turbine Engine Performance Presentation for Computer Programs
DoD Adopted |
| 83 | SAE J2732-2008 | 2008-06-01 | English | Motor Vehicle Seat Dimensions |
| 84 | SAE AS 5808-2008 | 2008-06-01 | 英语 | FITTINGN ASSEMBLY, TEE, FEMALE FLARELESS AND AXIALLY SWAGE ON RUN, FEMALE FLARELESS ON THE BRANCH, HYDRAULIC, 3000 PSI |
| 85 | SAE AMS4214J-2008 | 2008-06-01 | English | Castings, Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and Overaged - (Composition similar to UNS A03550) |
| 86 | SAE AS21924C-2008 | 2008-06-01 | English | UNION, FLARELESS TUBE, BULKHEAD AND UNIVERSAL
DoD Adopted |
| 87 | SAE AS 5804-2008 | 2008-06-01 | 英语 | FITTING ASSEMBLY, TEE, FEMALE FLARELESS AND AXIALLY SWAGED ON THE RUN, AXIALLY SWAGED ON THE BRANCH, HYDRAULIC, 3000 PSI |
| 88 | SAE AS21925C-2008 | 2008-06-01 | English | ELBOW, 90掳 UNIVERSAL, FLARELESS TUBE, HIGH PROFILE
DoD Adopted |
| 89 | SAE AMS2950/1-2008 | 2008-06-01 | English | Paste Adhesive for Core Restoration Part 1 - General Requirements |
| 90 | SAE AS5805-2008 | 2008-06-01 | English | FITTING ASSEMBLY, 90掳, FLARELESS BULKHEAD, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| 91 | SAE AMS-DTL-22499/4A-2008 | 2008-06-01 | English | SHIM STOCK, LAMINATED, CARBON STEEL |
| 92 | SAE AMS2816W-2008 | 2008-06-01 | English | Identification Welding Wire, Tab Marking Method
DoD Adopted |
| 93 | SAE AS5809-2008 | 2008-06-01 | English | FITTING ASSEMBLY, TEE, FEMALE FLARELESS AND AXIALLY SWAGED ON THE RUN, MALE FLARELESS ON BRANCH, HYDRAULIC, 3000 PSI |
| 94 | SAE AS1790H-2008 | 2008-06-01 | English | NUT, FITTING, RETAINED, LIGHTWEIGHT
DoD Adopted |
| 95 | SAE AS5806-2008 | 2008-06-01 | English | FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, FEMALE FLARELESS ON THE BRANCH, HYDRAULIC, 3000 PSI |
| 96 | SAE AS4223A-2008 | 2008-06-01 | English | FITTING, UNION, BULKHEAD BEAM SEAL |
| 97 | SAE AMS5397D-2008 | 2008-06-01 | English | (R) Alloy Castings, Investment, Corrosion and Heat-Resistant 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015B - 0.95V - 0.06Zr Vacuum Melted, Vacuum Cast As Cast - UNS N13100
DoD Adopted |
| 98 | SAE AS 21909C-2008 | 2008-06-01 | 英语 | TEE, BULKHEAD AND UNIVERSAL, FLARELESS TUBE |
| 99 | SAE J1212-2008 | 2008-06-01 | English | (R) Fire Prevention on Forestry Machinery |
| 100 | SAE AMS2816W-2008 | 2008-06-01 | English | Identification Welding Wire, Tab Marking Method |
| 101 | SAE AMS2950/1-2008 | 2008-06-01 | English | Paste Adhesive for Core Restoration Part 1 - General Requirements |
| 102 | SAE AMS 2430N-2008 | 2008-06-01 | 英语 | Shot Peening, Automatic |
| 103 | SAE USCAR-5-2008 | 2008-06-01 | English | AVOIDANCE OF HYDROGEN EMBRITTLEMENT OF STEEL - Revision 3 |
| 104 | SAE AMS2380F-2008 | 2008-06-01 | English | Approval and Control of Premium-Quality Titanium Alloys |
| 105 | SAE AS21944B-2008 | 2008-06-01 | English | BODY, CLUSTER FITTING, TWO WAY, 180°, FLARELESS |
| 106 | SAE J2073-2008 | 2008-06-01 | English | Automotive Starter Remanufacturing Procedures |
| 107 | SAE AS 23190-A3-2008 | 2008-06-01 | 英语 | Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support |
| 108 | SAE AS 21921B-2008 | 2008-06-01 | 英语 | NUT, SLEEVE COUPLING, FLARELESS |
| 109 | SAE AS21914C-2008 | 2008-06-01 | English | CAP, PRESSURE SEAL, FLARELESS TUBE FITTING
DoD Adopted |
| 110 | SAE AS21915C-2008 | 2008-06-01 | English | ADAPTER, STRAIGHT, TUBE TO BOSS
DoD Adopted |
| 111 | SAE AS 21910C-2008 | 2008-06-01 | 英语 | TEE, BULKHEAD, FLARELESS TUBE, INTERNAL THREAD ON SIDE |
| 112 | SAE J1998-2008 | 2008-06-01 | English | Internal Combustion Engines鈥擯iston Rings鈥?Rectangular Rings With Narrow Ring Width |
| 113 | SAE J2004-2008 | 2008-06-01 | English | Internal Combustion Engines鈥擯iston Rings鈥擡xpander/Segment Oil Control Rings |
| 114 | SAE J1997-2008 | 2008-06-01 | English | Internal Combustion Engines鈥擯iston Rings鈥擱ectangular Rings |
| 115 | SAE J1591-2008 | 2008-06-01 | English | Internal Combustion Engines鈥擯iston Rings鈥擥eneral Specifications |
| 116 | SAE AIR5747-2008 | 2008-06-01 | English | EMC Laboratory RF Radiated Emission Report for Passive Radio Frequency Identification (RFID) Tags |
| 117 | SAE AS5081-2008 | 2008-06-01 | English | FITTING ASSEMBLY, 90掳, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| 118 | SAE J2226-2008 | 2008-06-01 | English | Internal Combustion Engines鈥擯iston Rings鈥擲teel Rectangular Rings |
| 119 | SAE J1996-2008 | 2008-06-01 | English | Internal Combustion Engines鈥擯iston Rings鈥擰uality Requirements |
| 120 | SAE J1589-2008 | 2008-06-01 | English | Internal Combustion Engines - Piston Rings - Inspection Measuring Principles |
| 121 | SAE AMS 4044L-2008 | 2008-06-01 | 英语 | Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed (7075-0) or when specified, As Fabricated (7075-F) - UNS A9075 |
| 122 | SAE AS5979A-2008 | 2008-06-01 | English | (R) FITTING ASSEMBLY, 45掳, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| 123 | SAE AMS3175-2008 | 2008-06-01 | English | Non-Chromated Surface Pretreatment Prior to Painting |
| 124 | SAE AMS 4048M-2008 | 2008-06-01 | 英语 | Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-0) Annealed - UNS A87075 |
| 125 | SAE J1999-2008 | 2008-06-01 | English | Internal Combustion Engines - Piston Rings - Scraper Rings |
| 126 | SAE AIR5871-2008 | 2008-06-01 | English | Prognostics for Gas Turbine Engines |
| 127 | SAE AS21944B-2008 | 2008-06-01 | English | BODY, CLUSTER FITTING, TWO WAY, 180掳, FLARELESS
DoD Adopted |
| 128 | SAE ARP1493B-2008 | 2008-06-01 | English | (R) Wheel and Hydraulically Actuated Brake Design and Test Requirements for Military Aircraft |
| 129 | SAE J2000-2008 | 2008-06-01 | English | Internal Combustion Engines鈥擯iston Rings鈥擪eystone Rings |
| 130 | SAE J2001-2008 | 2008-06-01 | English | Internal Combustion Engines鈥擯iston Rings鈥擧alf Keystone Rings |
| 131 | SAE J2002-2008 | 2008-06-01 | English | Internal Combustion Engines鈥擯iston Rings鈥擮il Control Rings |
| 132 | SAE J2003-2008 | 2008-06-01 | English | Internal Combustion Engines鈥擯iston Rings Coil Spring Loaded Oil Control Rings |
| 133 | SAE AMS3200K-2008 | 2008-06-01 | English | Butadiene Acrylonitrile (NBR) Rubber Petroleum-Base Hydraulic Fluid Resistant 55 - 65
DoD Adopted |
| 134 | SAE AIR887C-2008 | 2008-06-01 | English | (R) Liquid Filter Ratings, Parameters and Tests |
| 135 | SAE AMS2242G-2008 | 2008-06-01 | English | Tolerances Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate
DoD Adopted |
| 136 | SAE AMS4082P-2008 | 2008-06-01 | English | Aluminum Alloy, Seamless Drawn Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated - UNS A96061
DoD Adopted |
| 137 | SAE AMS4285D-2008 | 2008-06-01 | English | Aluminum Alloy Castings, Centrifugal 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated - UNS A03560 |
| 138 | SAE AMS4284H-2008 | 2008-06-01 | English | Aluminum Alloy Castings, Permanent Mold 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated - (Composition similar to UNS A03560) |
| 139 | SAE AMS3756B-2008 | 2008-06-01 | English | Moldings, Glass Fiber Filled Polytetrafluoroethylene (PTFE) 75% PTFE Resin, 25% Glass Fibers, As Sintered
DoD Adopted |
| 140 | SAE AMS3214L-2008 | 2008-06-01 | English | Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 35 - 45
DoD Adopted |
| 141 | SAE AMS3238F-2008 | 2008-06-01 | English | Butyl (IIR) Rubber Phosphate Ester Resistant 65 - 75
DoD Adopted |
| 142 | SAE AMS3222H-2008 | 2008-06-01 | English | Synthetic Rubber Hot Oil Resistant, High Swell 45 - 55
DoD Adopted |
| 143 | SAE AMS2448A-2008 | 2008-06-01 | English | Application of Tungsten Carbide Coatings on Ultra High Strength Steels High Velocity Oxygen / Fuel Process |
| 144 | SAE AS 5587A-2008 | 2008-06-01 | 英语 | Clamp, Loop, Plain, Support, Aircraft |
| 145 | SAE AMS4081J-2008 | 2008-06-01 | English | Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged - Composition similar to UNS A96061
DoD Adopted |
| 146 | SAE AMS4281G-2008 | 2008-06-01 | English | Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated - (Composition similar to UNS A03550)
DoD Adopted |
| 147 | SAE AMS4260G-2008 | 2008-06-01 | English | Aluminum Alloy, Investment Castings 7.0Si - 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated - UNS A03560 |
| 148 | SAE AMS4280J-2008 | 2008-06-01 | English | Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.5Mg (355.0-T71) Solution Heat Treated and Overaged - (Composition similar to UNS A03550) |
| 149 | SAE AMS2756B-2008 | 2008-06-01 | English | Gas Nitriding of Steel Parts |
| 150 | SAE ARP5602/6-2008 | 2008-06-01 | English | A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Installer Hands-on Competencies |
| 151 | SAE GEIA-TB-0002-2008 | 2008-06-01 | English | System Configuration Management I mplementation Template (Oriented for a US Military Contract Environment) - Formerly TechAmerica GEIA-TB-0002 |
| 152 | SAE AMS3239F-2008 | 2008-06-01 | English | Butyl (IIR) Rubber Phosphate Ester Resistant 85 - 95
DoD Adopted |
| 153 | SAE AS5801-2008 | 2008-06-01 | English | FITTING ASSEMBLY, 90掳, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| 154 | SAE AMS3430D-2008 | 2008-06-01 | English | Brazing Filler Metal, Paste, Copper Water Thinning |
| 155 | SAE ARP603G-2008 | 2008-06-01 | English | Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies
DoD Adopted | ANSI Approved |
| 156 | SAE AS5802-2008 | 2008-06-01 | English | FITTING ASSEMBLY, 90掳, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| 157 | SAE AS 5000B-2008 | 2008-06-01 | 英语 | Fitting, Plug-in Union, Ring Locked, 24掳 Cone, Fluid Connection, 5080 psi, Specification for |
| 158 | SAE AMS4063E-2008 | 2008-06-01 | English | Aluminum Alloy, Clad One Side, Sheet 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet) Annealed - Composition similar to UNS A83003 |
| 159 | SAE ARP599D-2008 | 2008-06-01 | English | Aerospace - Dynamic Test Method for Determining the Relative Degree of Cleanliness of the Downstream Side of Filter Elements |
| 160 | SAE AIR887C-2008 | 2008-06-01 | English | (R) Liquid Filter Ratings, Parameters and Tests |
| 161 | SAE J883-2008 | 2008-05-01(R 2014) | English | Test Method for Determining Dimensional Stability of Automotive Textile Materials |
| 162 | SAE AMS4146G-2008 | 2008-05-01(R 2014) | English | Aluminum Alloy Forgings and Rolled or Forged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4) Solution Heat Treated and Naturally Aged - UNS A96061 |
| 163 | SAE J1531-2008 | 2008-05-01(R 2014) | English | Seam Damage Test Procedure |
| 164 | SAE J1167-2008 | 2008-05-01 | English | (R) Motorcycle Stop Lamp Switch |
| 165 | SAE J1603-2008 | 2008-05-01 | English | Rubber Seals for Hydraulic Disc Brake Cylinders |
| 166 | SAE J883-2008 | 2008-05-01 | English | Test Method for Determining Dimensional Stability of Automotive Textile Materials |
| 167 | SAE J1570-2008 | 2008-05-01 | English | Rubber Dust Boots for the Hydraulic Disk Brake Piston |
| 168 | SAE AIR 5665-2008 | 2008-05-01 | 英语 | Architecture Framework for Unmanned Systems |
| 169 | SAE AS85049/41A-A1-2008 | 2008-05-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, NON-ENVIRONMENTAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (FOR MIL-DTL-5015 GENERAL DUTY 'A' ENDBELL AND AS85049 ACCESSORIES)
DoD Adopted |
| 170 | SAE J534-2008 | 2008-05-01 | English | Lubrication Fittings
DoD Adopted |
| 171 | SAE J200-2008 | 2008-05-01 | English | (R) Classification System for Rubber Materials |
| 172 | SAE J2075-2008 | 2008-05-01 | English | Alternator Remanufacturing/Rebuilding Procedures Includes Passenger Car, Heavy Duty, Industrial, Agricultural, and Marine |
| 173 | SAE AMS4146G-2008 | 2008-05-01 | English | Aluminum Alloy Forgings and Rolled or Forged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4) Solution Heat Treated and Naturally Aged - UNS A96061 |
| 174 | SAE J1531-2008 | 2008-05-01 | English | Seam Damage Test Procedure |
| 175 | SAE J2513-2008 | 2008-05-01 | English | Earthmoving Machinery鈥擟oupling of Attachments to Skid Steer Loaders |
| 176 | SAE AS85049B-A1-2008 | 2008-05-01 | English | Connector Accessories, Electrical General Specification For
DoD Adopted |
| 177 | SAE J2530-2008 | 2008-05-01 | 英语 | Aftermarket Wheels鈥擯assenger Cars and Light Truck鈥擯erformance Requirements and Test Procedures |
| 178 | SAE J2450/1-2008 | 2008-05-01 | English | SAE J2450 Supplemental Training Document |
| 179 | SAE J1298-2008 | 2008-05-01 | 英语 | Connections for Fluid Power and General Use鈥擧ydraulic Couplings鈥?Diagnostic Port Sizes and Locations |
| 180 | SAE J1287-2008 | 2008-05-01 | English | (R) Measurement of Exhaust Sound Pressure Levels of Stationary Motorcycles |
| 181 | SAE AS4191-2008 | 2008-04-01(R 2013) | English | Gas Turbine Engine Performance Presentation for Computer Programs Using FORTRAN |
| 182 | SAE J2719-2008 | 2008-04-01 | English | Information Report on the Development of a Hydrogen Quality Guideline for Fuel Cell Vehicles |
| 183 | SAE J1849-2008 | 2008-04-01 | English | (R) Emergency Vehicle Sirens |
| 184 | SAE J1084-2008 | 2008-04-01 | English | Operator Protective Structure Performance Criteria for Certain Forestry Equipment |
| 185 | SAE J1097-2008 | 2008-04-01 | English | Hydraulic Excavator Lift Capacity Calculation and Test Procedure |
| 186 | SAE J2807-2008 | 2008-04-01 | 英语 | Performance Requirements for Determining Tow-Vehicle Gross Combination Weight Rating and Trailer Weight Rating |
| 187 | SAE J321-2008 | 2008-04-01 | English | Tire Guards for Operator Protection鈥?Earthmoving Haulage Machines |
| 188 | SAE AS26805A-2008 | 2008-04-01 | English | Compressor Units, Air/Gas, General Requirements For |
| 189 | SAE AS 85049/43A-A1-2008 | 2008-04-01 | 英语 | Connector Accessories, Electrical, Strain Relief, Nonenvironmental, Self-Locking and Non-Self-Locking, 45掳, Category 4B (for MIL-DTL-5015 Crimp, MIL-C-26482 Series 2, AS81703 Series 3, and MIL-DTL-83723 Series III Connectors) |
| 190 | SAE ARP5374A-2008 | 2008-04-01 | English | Method of Testing Pre-Conditioned Air Equipment |
| 191 | SAE AS4191-2008 | 2008-04-01 | English | Gas Turbine Engine Performance Presentation for Computer Programs Using FORTRAN |
| 192 | SAE AS39029/31A-A1-2008 | 2008-04-01 | English | Contacts, Electrical Connector, Pin, Crimp Removable (for MIL-DTL-26482 Series 1, MIL-DTL-26500 and MIL-DTL-26518 Connectors)
DoD Adopted |
| 193 | SAE J1062-2008 | 2008-04-01 | English | Snowmobile Passenger Handgrips |
| 194 | SAE/TP 2008-36-0557-2008 | 2008-03-30 | English | Development of a vibroacoustic system for non-destructive test in aerospace structures |
| 195 | SAE/TP 2008-36-0528-2008 | 2008-03-30 | English | Experimental Determination of the Damping Loss Factor of Highly Damped Ribbed-Stiffened Panels |
| 196 | SAE/TP 2008-36-0575-2008 | 2008-03-30 | English | Advanced Modeling of Aircraft Interior Noise using the Hybrid FE-SEA method |
| 197 | SAE/TP 2008-36-0518-2008 | 2008-03-30 | English | Noise Source Imaging by Beamforming |
| 198 | SAE/TP 2008-36-0536-2008 | 2008-03-30 | English | In-flight Output Only Modal Analysis of Aircraft Structural Dynamics |
| 199 | SAE/TP 2008-36-0533-2008 | 2008-03-30 | English | Real Time Identification for Natural Input Modal Testing |
| 200 | SAE AS140G-2008 | 2008-03-01(R 2014) | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, 45° TO 90° |
| 201 | SAE AS141G-2008 | 2008-03-01(R 2014) | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, 90° TO 90° |
| 202 | SAE AMS2759/4C-2008 | 2008-03-01(R 2014) | English | Heat Treatment Austenitic Corrosion-Resistant Steel Parts |
| 203 | SAE J288-2008 | 2008-03-01(R 2014) | English | Snowmobile Fuel Tanks |
| 204 | SAE AS136G-2008 | 2008-03-01(R 2014) | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO STRAIGHT |
| 205 | SAE AS137G-2008 | 2008-03-01(R 2014) | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO 45° |
| 206 | SAE AS139G-2008 | 2008-03-01(R 2014) | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, 45° TO 45° |
| 207 | SAE ARP5941-2008 | 2008-03-01(R 2014) | English | Aerospace Fluid Power - Contamination Sensitivity - Considerations for Establishing Test Procedures for Flight Control Actuators |
| 208 | SAE AMS5709H-2008 | 2008-03-01(R 2013) | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution, Stabilization, and Precipitation Heat Tr |
| 209 | SAE ARP5624-2008 | 2008-03-01(R 2013) | English | Aircraft Inflight Icing Terminology |
| 210 | SAE ARP5908-2008 | 2008-03-01(R 2013) | English | Landing Gear Servicing |
| 211 | SAE AMS5707L-2008 | 2008-03-01(R 2013) | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabiliz |
| 212 | SAE AMS4215H-2008 | 2008-03-01(R 2013) | English | Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6) Solution and Precipitation Heat Treated - UNS A33550 |
| 213 | SAE AMS4235B-2008 | 2008-03-01(R 2013) | English | Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T71) Solution and Precipitation Heat Treated - UNS A12060 |
| 214 | SAE AMS5385H-2008 | 2008-03-01(R 2013) | English | Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings 62Co - 27Cr - 2.8Ni - 5.5Mo As-Cast - UNS R30021(DoD Adopted) |
| 215 | SAE AMS5380G-2008 | 2008-03-01(R 2013) | English | Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings 50.5Co - 26Cr - 15Ni - 6.0Mo As-Cast - UNS R30030(DoD Adopted) |
| 216 | SAE AMS5704J-2008 | 2008-03-01(R 2013) | English | Nickel Alloy, Corrosion and Heat Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation H |
| 217 | SAE AMS2806C-2008 | 2008-03-01(R 2013) | English | Identification Bars, Wire, Mechanical Tubing, and Extrusions Carbon and Alloy Steels and Corrosion and Heat-Resistant Steels and Alloys |
| 218 | SAE AS4536B-2008 | 2008-03-01(R 2012) | English | Safety Cable Kit Procurement Specification and Requirement for Use |
| 219 | SAE AMS5864C-2008 | 2008-03-01(R 2012) | English | Steel, Corrosion-Resistant, Plate 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable - UNS S13800
DoD Adopted |
| 220 | SAE ARP5718-2008 | 2008-03-01 | English | Qualification Process for SAE AMS1428 Type II, III, and IV Fluids |
| 221 | SAE AMS4215H-2008 | 2008-03-01 | English | Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6) Solution and Precipitation Heat Treated - UNS A33550
DoD Adopted |
| 222 | SAE AS141G-2008 | 2008-03-01 | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, 90掳 TO 90掳 |
| 223 | SAE AS140G-2008 | 2008-03-01 | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, 45掳 TO 90掳 |
| 224 | SAE AS22759A-A1-2008 | 2008-03-01 | English | Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
DoD Adopted |
| 225 | SAE AS139G-2008 | 2008-03-01 | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, 45掳 TO 45掳 |
| 226 | SAE AS137G-2008 | 2008-03-01 | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO 45掳 |
| 227 | SAE AS136G-2008 | 2008-03-01 | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO STRAIGHT |
| 228 | SAE ARP5941-2008 | 2008-03-01 | English | Aerospace Fluid Power - Contamination Sensitivity - Considerations for Establishing Test Procedures for Flight Control Actuators |
| 229 | SAE AMS5864C-2008 | 2008-03-01 | English | Steel, Corrosion-Resistant, Plate 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable - UNS S13800
DoD Adopted |
| 230 | SAE AMS5779E-2008 | 2008-03-01 | English | Alloy Welding Electrodes, Covered, Corrosion and Heat Resistant 75Ni - 15Cr - 1.5 (Cb+Ta) - 1.9Ti - 0.55Al - 5.5Fe - UNS N07750
DoD Adopted |
| 231 | SAE ARP5908-2008 | 2008-03-01 | English | Landing Gear Servicing |
| 232 | SAE AMS3279C-2008 | 2008-03-01 | English | Sealing Compound, Sprayable For Integral Fuel Tanks and Fuel Cell Cavities, For Intermittent Use to 350 掳F (177 掳C) |
| 233 | SAE AMS3276E-2008 | 2008-03-01 | English | Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 掳F (182 掳C)
DoD Adopted |
| 234 | SAE AMS3269B-2008 | 2008-03-01 | English | Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities High Strength, for Intermittent Use to 360 掳F (182 掳C)
DoD Adopted |
| 235 | SAE AMS5709H-2008 | 2008-03-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 掳F (1079 掳C) Solution, Stabilization, and Precipitation Heat Treated - UNS N07001
DoD Adopted |
| 236 | SAE AMS5708K-2008 | 2008-03-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Consumable Electrode or Vacuum Induction Melted 1975 掳F (1079 掳C) Solution Heat Treated - UNS N07001
DoD Adopted |
| 237 | SAE AMS5707L-2008 | 2008-03-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900 degrees F (996 to 1038 Degrees C) Solution, Stabilization, and Precipitation Heat Treated - UNS N07001
DoD Adopted |
| 238 | SAE AMS5704J-2008 | 2008-03-01 | English | Nickel Alloy, Corrosion and Heat Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 Degrees F (996 to 1038 Degrees C) Solution, Stabilization, and Precipitation Heat Treated
DoD Adopted |
| 239 | SAE AS39029/33A-2008 | 2008-03-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-81511 SERIES 1 CONNECTORS)
DoD Adopted |
| 240 | SAE AS39029/36A-2008 | 2008-03-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-28748/9 CONNECTORS)
DoD Adopted |
| 241 | SAE AS39029/46A-2008 | 2008-03-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-81511 SERIES 2 CONNECTORS)
DoD Adopted |
| 242 | SAE AMS1551A-2008 | 2008-03-01 | English | Cleaner, Turbine Engine Gas Path Aqueous Type |
| 243 | SAE AS4536B-2008 | 2008-03-01 | English | (R) Safety Cable Kit Procurement Specification and Requirement for Use |
| 244 | SAE AMS1532D-2008 | 2008-03-01 | English | Cleaner for Aircraft Exterior Surfaces Wipe-On, Wipe-Off, Emulsion-Type |
| 245 | SAE AMS1547A-2008 | 2008-03-01 | English | Cleaner, Anodic, Electrolytic, Alkaline For Steel, Tank Type |
| 246 | SAE AMS2806C-2008 | 2008-03-01 | English | Identification Bars, Wire, Mechanical Tubing, and Extrusions Carbon and Alloy Steels and Corrosion and Heat-Resistant Steels and Alloys
DoD Adopted |
| 247 | SAE AMS1551A-2008 | 2008-03-01 | English | Cleaner, Turbine Engine Gas Path Aqueous Type |
| 248 | SAE AMS1370A-2008 | 2008-03-01 | English | Compound, Rust Remover, Liquid Aircraft and Aerospace Components, Immersion Tank Method |
| 249 | SAE AIR5656-2008 | 2008-03-01 | English | Statistical Stability Assessment |
| 250 | SAE AMS5060J-2008 | 2008-03-01 | English | Steel, Bars, Forgings, and Tubing 0.13 - 0.18C (SAE 1015) - UNS G10150
DoD Adopted |
| 251 | SAE AMS4917G-2008 | 2008-03-01 | English | Titanium Alloy Sheet, Strip, and Plate 13.5V - 11Cr - 3.0Al Solution Heat Treated - UNS R58010 |
| 252 | SAE AMS4501E-2008 | 2008-03-01 | English | Copper Sheet, Strip, and Plate Oxygen-Free, Light Cold Rolled - UNS C10200 |
| 253 | SAE AMS5696D-2008 | 2008-03-01 | English | Steel, Corrosion and Heat-Resistant, Welding Wire 19Cr - 12.5Ni - 2.5Mo High Ferrite Grade - UNS S31683 |
| 254 | SAE ARP5757-2008 | 2008-03-01 | English | Guidelines for Engine Component Tests |
| 255 | SAE AMS1545B-2008 | 2008-03-01 | English | Cleaner, Thrust Reverser Alkaline, Water-Base |
| 256 | SAE AS71051B-2008 | 2008-03-01 | English | Pipe Threads, Taper, Aeronautical National Form, Symbol ANPT - Design and Inspection Standard |
| 257 | SAE ARP5941-2008 | 2008-03-01 | English | Aerospace Fluid Power - Contamination Sensitivity - Considerations for Establishing Test Procedures for Flight Control Actuators |
| 258 | SAE AMS5380G-2008 | 2008-03-01 | English | Cobalt Alloy, Corrosion and Heat-Resistant Investment Castings 50.5Co - 26Cr - 15Ni - 6.0Mo As-Cast - UNS R30030 |
| 259 | SAE ARP5624-2008 | 2008-03-01 | English | Aircraft Inflight Icing Terminology |
| 260 | SAE AS81820C-2008 | 2008-03-01 | English | (R) Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation
DoD Adopted |
| 261 | SAE ARP1846A-2008 | 2008-03-01 | English | (R) Measurement of Far Field Noise from Gas Turbine Engines During Static Operation |
| 262 | SAE AS85049/138 AMD 1-2008 | 2008-03-01 | English | Connector Accessories, Electrical, Cap, Dust, Plastic, Category 9 |
| 263 | SAE AMS6461K-2008 | 2008-03-01 | English | Steel, Welding Wire 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130) Vacuum Melted, Environment Controlled Packaging - UNS K13148
DoD Adopted |
| 264 | SAE AS5458B-2008 | 2008-03-01 | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO STRAIGHT |
| 265 | SAE AS5459B-2008 | 2008-03-01 | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO 45掳 |
| 266 | SAE AS5460B-2008 | 2008-03-01 | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO 90掳 |
| 267 | SAE AMS1526C-2008 | 2008-03-01 | English | Cleaner for Aircraft Exterior Surfaces Water-Miscible, Pressure-Spraying Type
DoD Adopted |
| 268 | SAE AS5461B-2008 | 2008-03-01 | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 45掳 TO 45 |
| 269 | SAE AS5462B-2008 | 2008-03-01 | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 45掳 TO 90掳 |
| 270 | SAE AS5463B-2008 | 2008-03-01 | English | (R) HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 90掳 TO 90掳 |
| 271 | SAE AS9535-2008 | 2008-03-01 | English | Substance Declaration Standard |
| 272 | SAE AS71051B-2008 | 2008-03-01 | English | Pipe Threads, Taper, Aeronautical National Form, Symbol ANPT - Design and Inspection Standard
DoD Adopted |
| 273 | SAE AMS3333A-2008 | 2008-03-01 | English | Sealing Compound, Polysulfide for Aircraft Windshields aand Canopies, for Use up to 250 Degrees F (121 Degrees C) |
| 274 | SAE AMS4235B-2008 | 2008-03-01 | English | Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T71) Solution and Precipitation Heat Treated - UNS A12060
DoD Adopted |
| 275 | SAE J1179-2008 | 2008-03-01 | English | Hydraulic Excavator and Backhoe Digging Forces |
| 276 | SAE AMS1527C-2008 | 2008-03-01 | English | Cleaner for Aircraft Exterior Surfaces Water-Miscible, Foam-On, Pressure-Spraying |
| 277 | SAE AMS1532D-2008 | 2008-03-01 | English | Cleaner for Aircraft Exterior Surfaces Wipe-On, Wipe-Off, Emulsion-Type |
| 278 | SAE AMS1529D-2008 | 2008-03-01 | English | Cleaner for Aircraft Exterior Surfaces Emulsion, Foam-On, Pressure-Spray Type |
| 279 | SAE AMS6462J-2008 | 2008-03-01 | English | Steel, Welding Wire 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130) - UNS K13149
DoD Adopted |
| 280 | SAE AMS1528D-2008 | 2008-03-01 | English | Cleaner for Aircraft Exterior Surfaces, Emulsion, Pressure-Spray Type |
| 281 | SAE AMS1547A-2008 | 2008-03-01 | English | Cleaner, Anodic, Electrolytic, Alkaline For Steel, Tank Type
DoD Adopted |
| 282 | SAE AMS1523B-2008 | 2008-03-01 | English | Cleaner for Exterior Aircraft Surfaces Thickened or Gel-Type, Water-Base |
| 283 | SAE AMS1531D-2008 | 2008-03-01 | English | Cleaner for Aircraft Exterior Surfaces Wipe-On, Wipe-Off, Containing Suspended Abrasive Solids |
| 284 | SAE AIR4365A-2008 | 2008-03-01 | English | 400 Hz Connection Aircraft Electrical Maintenance Procedures |
| 285 | SAE ARP9536-2008 | 2008-03-01 | English | Declarable Substances Recommended Practice |
| 286 | SAE AMS1545B-2008 | 2008-03-01 | English | Cleaner, Thrust Reverser Alkaline, Water-Base |
| 287 | SAE AMS1530C-2008 | 2008-03-01 | English | Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off |
| 288 | SAE J1349-2008 | 2008-03-01 | English | Engine Power Test Code鈥擲park Ignition and Compression Ignition鈥擭et Power Rating
DoD Adopted |
| 289 | SAE AMS1540C-2008 | 2008-03-01 | English | Cleaner, Thrust Reverser Water-Base |
| 290 | SAE AMS1533B-2008 | 2008-03-01 | English | Cleaner for Exterior Aircraft Surfaces Gel-Type, Solvent-Base |
| 291 | SAE AMS2759/4C-2008 | 2008-03-01 | English | Heat Treatment Austenitic Corrosion-Resistant Steel Parts |
| 292 | SAE AMS3667D-2008 | 2008-03-01 | English | (R) Polytetrafluoroethylene (PTFE) Sheet, Molded General Purpose Grade, AS Sintered |
| 293 | SAE J288-2008 | 2008-03-01 | English | Snowmobile Fuel Tanks |
| 294 | SAE AMS-T-21014A-2008 | 2008-03-01 | English | Tungsten Base Metal, High Density
DoD Adopted |
| 295 | SAE AS896C-2008 | 2008-03-01 | English | (R) FITTING, NIPPLE, REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD
DoD Adopted |
| 296 | SAE AMS5380G-2008 | 2008-03-01 | English | Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings 50.5Co - 26Cr - 15Ni - 6.0Mo As-Cast - UNS R30030
DoD Adopted |
| 297 | SAE AMS5385H-2008 | 2008-03-01 | English | Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings 62Co - 27Cr - 2.8Ni - 5.5Mo As-Cast - UNS R30021
DoD Adopted |
| 298 | SAE AS895C-2008 | 2008-03-01 | English | (R) FITTING, ELBOW, 45掳, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD |
| 299 | SAE AS894C-2008 | 2008-03-01 | English | (R) FITTING, TEE, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE ON RUN, EXTERNAL THREAD |
| 300 | SAE AMS2807B-2008 | 2008-02-01(R 2019) | English | Identification Carbon and Low-Alloy Steels, Corrosion and Heat-Resistant Steels and Alloys Sheet, Strip, Plate, and Aircraft Tubing |
| 301 | SAE J1166-2008 | 2008-02-01(R 2014) | English | (R) Sound Measurement-Off-Road Self-Propelled Work Machines Operator-Work Cycle(DoD Adopted) |
| 302 | SAE AIR1839C-2008 | 2008-02-01(R 2014) | English | (R) A Guide to Aircraft Turbine Engine Vibration Monitoring Systems |
| 303 | SAE J1388-2008 | 2008-02-01(R 2013) | English | Personnel Protection - Skid Steer Loaders |
| 304 | SAE AS23190/3A-2008 | 2008-02-01(R 2013) | English | (R) STRAPS, CLAMPS, AND MOUNTING HARDWARE, PLASTIC AND METAL FOR CABLE HARNESS TYING AND SUPPORT STRAP, TIE DOWN, ADJUSTABLE, CORROSION RESISTANT STEEL, TYPE VI, CLASS 1 |
| 305 | SAE AMS5869C-2008 | 2008-02-01(R 2013) | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb Solution Heat Treated - UNS N06625(DoD Adopted) |
| 306 | SAE AIR4061B-2008 | 2008-02-01(R 2012) | English | (R) Guidelines for Integrating Typical Engine Health Management Functions Within Aircraft Systems |
| 307 | SAE AMS6474A-2008 | 2008-02-01(R 2012) | English | Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness |
| 308 | SAE AMS2415J-2008 | 2008-02-01(R 2012) | English | Plating, Lead and Indium |
| 309 | SAE J1939-05-2008 | 2008-02-01(R 2012) | English | Marine Stern Drive and Inboard Spark-Ignition Engine On-Board Diagnostics Implementation Guide |
| 310 | SAE AMS2819B-2008 | 2008-02-01(R 2012) | English | Identification, Welding Wire Direct Color Code System |
| 311 | SAE AMS2807B-2008 | 2008-02-01(R 2012) | English | Identification Carbon and Low-Alloy Steels, Corrosion and Heat-Resistant Steels and Alloys Sheet, Strip, Plate, and Aircraft Tubing |
| 312 | SAE ARP5783-2008 | 2008-02-01(R 2012) | English | Health and Usage Monitoring Metrics Monitoring the Monitor |
| 313 | SAE J360-2008 | 2008-02-01(R 2011) | English | Truck and Bus Grade Parking Performance Test Procedure
DoD Adopted |
| 314 | SAE ARP490F-2008 | 2008-02-01 | English | (R) Electrohydraulic Servovalves
DoD Adopted |
| 315 | SAE AMS2819B-2008 | 2008-02-01 | English | Identification, Welding Wire Direct Color Code System |
| 316 | SAE AMS-WW-T-700/7A-2008 | 2008-02-01 | English | Tube, Aluminum Alloy, Drawn, Seamless, 7075
DoD Adopted |
| 317 | SAE AS5763-2008 | 2008-02-01 | English | CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, FUEL AND PETROLEUM BASED HYDRAULIC FLUID |
| 318 | SAE AMS-H-81829A-2008 | 2008-02-01 | English | Heat Transfer Fluid, Fluorochemical
DoD Adopted |
| 319 | SAE J1388-2008 | 2008-02-01 | English | Personnel Protection - Skid Steer Loaders |
| 320 | SAE AMS-G-952B-2008 | 2008-02-01 | English | Guns, Spray, Oil and Solvent
DoD Adopted |
| 321 | SAE ARP5783-2008 | 2008-02-01 | English | Health and Usage Monitoring Metrics Monitoring the Monitor |
| 322 | SAE AMS6511-2008 | 2008-02-01 | English | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18Ni - 8.5Co - 3.2Mo - 0.20Ti - 0.10Al Double Vacuum Melted, Annealed - UNS K92710 |
| 323 | SAE AMS6515-2008 | 2008-02-01 | English | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni - 12.0Co - 4.9Mo - 1.40Ti - 0.10Al Double Vacuum Melted, Annealed - UNS K93540 |
| 324 | SAE AMS5950B-2008 | 2008-02-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50AI - 18Fe Vacuum Induction and Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable - UNS N07719 |
| 325 | SAE AS832F-2008 | 2008-02-01 | English | Air/Surface (Intermodal) General Purpose Containers |
| 326 | SAE AIR4061B-2008 | 2008-02-01 | English | (R) Guidelines for Integrating Typical Engine Health Management Functions Within Aircraft Systems |
| 327 | SAE ARP597D-2008 | 2008-02-01 | English | (R) Wheels and Brakes, Supplementary Criteria for Design Endurance Civil Transport Aircraft |
| 328 | SAE AMS5085G-2008 | 2008-02-01 | English | Steel Sheet, Strip, and Plate 0.47 - 0.55C (SAE 1050) Annealed
DoD Adopted |
| 329 | SAE AS28889A-2008 | 2008-02-01 | English | VALVE, AIR, HIGH PRESSURE CHARGING, 5000 PSI |
| 330 | SAE AS5874-2008 | 2008-02-01 | English | CLAMP, LOOP TYPE, CUSHIONED SUPPORT |
| 331 | SAE AMS6424E-2008 | 2008-02-01 | English | Steel Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) - UNS K22950
DoD Adopted |
| 332 | SAE AMS5869C-2008 | 2008-02-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb Solution Heat Treated - UNS N06625
DoD Adopted |
| 333 | SAE AIR5829-2008 | 2008-02-01 | English | Air in Aircraft Hydraulic Systems |
| 334 | SAE ARP5783-2008 | 2008-02-01 | English | Health and Usage Monitoring Metrics Monitoring the Monitor |
| 335 | SAE J360-2008 | 2008-02-01 | English | Truck and Bus Grade Parking Performance Test Procedure |
| 336 | SAE AMS3128G-2008 | 2008-02-01 | English | Aluminum Pigment Paste |
| 337 | SAE AS7928A-2008 | 2008-02-01 | English | (R) Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For
DoD Adopted |
| 338 | SAE AMS2772E-2008 | 2008-02-01 | English | Heat Treatment of Aluminum Alloy Raw Materials |
| 339 | SAE AMS4910N-2008 | 2008-02-01 | English | Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn Annealed - UNS R54520 |
| 340 | SAE AMS4909H-2008 | 2008-02-01 | English | Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn, Extra Low Interstitial Annealed |
| 341 | SAE AMS2807B-2008 | 2008-02-01 | English | Identification Carbon and Low-Alloy Steels, Corrosion and Heat-Resistant Steels and Alloys Sheet, Strip, Plate, and Aircraft Tubing
DoD Adopted |
| 342 | SAE J1061-2008 | 2008-02-01 | English | Surface Discontinuities on General Application Bolts, Screws, and Studs |
| 343 | SAE AS23190/3A-2008 | 2008-02-01 | English | (R) Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support Strap, Tie down, Adjustable, Corrosion Resistant Steel Type VI, Class 1
DoD Adopted |
| 344 | SAE AMS4905D-2008 | 2008-02-01 | English | Titanium Alloy, Damage-Tolerant Grade Plate 6Al - 4V Beta Annealed - UNS R56400 |
| 345 | SAE AS2078A-2008 | 2008-02-01 | English | (R) Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE) |
| 346 | SAE AS5874-2008 | 2008-02-01 | English | CLAMP, LOOP TYPE, CUSHIONED SUPPORT |
| 347 | SAE AMS4933D-2008 | 2008-02-01 | English | Titanium Alloy Extrusions and Flash Welded Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized - UNS R54810 |
| 348 | SAE AMS4943H-2008 | 2008-02-01 | English | Titanium Alloy, Hydraulic, Seamless Tubing 3.0Al - 2.5V Annealed
DoD Adopted |
| 349 | SAE J1715-2008 | 2008-02-01 | English | (R) Hybrid Electric Vehicle (HEV) & Electric Vehicle (EV) Terminology |
| 350 | SAE J2016-2008 | 2008-02-01 | English | Chemical Stress Resistance of Polymers |
| 351 | SAE J1828-2008 | 2008-02-01 | English | Uniform Reference and Dimensional Guidelines for Collision Repair |
| 352 | SAE J1082-2008 | 2008-02-01 | English | Fuel Economy Measurement Road Test Procedure
DoD Adopted |
| 353 | SAE J1623-2008 | 2008-02-01 | English | All-Terrain Vehicle Headlamps |
| 354 | SAE AMS3170G-2008 | 2008-02-01 | English | Thinner, Alcohol-Ester |
| 355 | SAE AMS7205G-2008 | 2008-02-01 | English | Spring Pins, Tubular Carbon Steel |
| 356 | SAE AMS6474A-2008 | 2008-02-01 | English | Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness |
| 357 | SAE AIR5829-2008 | 2008-02-01 | English | Air in Aircraft Hydraulic Systems |
| 358 | SAE AMS4959E-2008 | 2008-02-01 | English | Titanium Alloy Wire 13.5V - 11Cr - 3Al Spring Temper - UNS R58010
DoD Adopted |
| 359 | SAE J2819-2008 | 2008-02-01 | English | TP2.0 Vehicle Diagnostic Protocol |
| 360 | SAE J585-2008 | 2008-02-01 | English | (R) Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less than 2032 mm in Overall Width
DoD Adopted |
| 361 | SAE J1166-2008 | 2008-02-01 | English | (R) Sound Measurement鈥擮ff-Road Self-Propelled Work Machines Operator-Work Cycle
DoD Adopted |
| 362 | SAE AMS4940A-2008 | 2008-02-01 | English | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength - UNS R50250 |
| 363 | SAE AMS4954H-2008 | 2008-02-01 | English | Titanium Alloy, Welding Wire 6Al - 4V - UNS R56402 |
| 364 | SAE AIR5866-2008 | 2008-02-01 | English | An Assessment of Planar Waves |
| 365 | SAE AMS4941E-2008 | 2008-02-01 | English | Titanium Tubing, Welded Annealed, 40 ksi (276 MPa) Yield Strength - UNS R50400
DoD Adopted |
| 366 | SAE J360-2008 | 2008-02-01 | English | Truck and Bus Grade Parking Performance Test Procedure
DoD Adopted |
| 367 | SAE AS2078A-2008 | 2008-02-01 | English | (R) Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE)
DoD Adopted |
| 368 | SAE AS8021-2008 | 2008-02-01 | English | Minimum Performance Standard for Direction Instrument, Non-Magnetic (Gyroscopically Stabilized) |
| 369 | SAE AIR1168/11-2008 | 2008-02-01 | English | Spacecraft Boost and Entry Heat Transfer |
| 370 | SAE AIR1839C-2008 | 2008-02-01 | English | (R) A Guide to Aircraft Turbine Engine Vibration Monitoring Systems |
| 371 | SAE AMS4246D-2008 | 2008-02-01 | English | Aluminum Alloy, Welding Wire 7.0Si - 0.52Mg (357) - UNS A03570
DoD Adopted |
| 372 | SAE AS5763-2008 | 2008-02-01 | English | CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, FUEL AND PETROLEUM BASED HYDRAULIC FLUID |
| 373 | SAE AMS-D-81956A-2008 | 2008-02-01 | English | Detergent, External Removable Fuel Tanks |
| 374 | SAE J1939-05-2008 | 2008-02-01 | English | Marine Stern Drive and Inboard Spark-Ignition Engine On-Board Diagnostics Implementation Guide |
| 375 | SAE AMS2411G-2008 | 2008-02-01 | English | Plating, Silver for High Temperature Applications
DoD Adopted |
| 376 | SAE AMS2415J-2008 | 2008-02-01 | English | Plating, Lead and Indium
DoD Adopted |
| 377 | SAE J2625-2008 | 2008-02-01 | English | Automotive Vehicle Brake Squeal Test Recommend Practice |
| 378 | SAE J1729-2008 | 2008-02-01 | English | Parking Brake Drawbar Pull Test Procedure鈥擳ruck and Bus |
| 379 | SAE AMS4970H-2008 | 2008-02-01 | English | Titanium Alloy Bars, Wire, and Forgings 7Al - 4Mo Solution and Precipitation Heat Treated - UNS R56740
DoD Adopted |
| 380 | SAE J2467-2008 | 2008-02-01 | English | Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending and Flaring |
| 381 | SAE AMS4973F-2008 | 2008-02-01 | English | Titanium Alloy Forgings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized - UNS R54810 |
| 382 | SAE J2435-2008 | 2008-02-01 | English | Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, and Beading |
| 383 | SAE ARP4741-2008 | 2008-02-01 | English | Aerospace-Hydraulic Switching Valve, Pressure or Pilot Operated |
| 384 | SAE AMS5643R-2008 | 2008-02-01 | English | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable - UNS S17400
DoD Adopted |
| 385 | SAE AS27198A-2008 | 2008-02-01 | English | Seal, Plain, Rubber, (-65 to + 350 Degrees F Fuel Resistant), Mold in Groove
DoD Adopted |
| 386 | SAE AMS5544J-2008 | 2008-02-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed - UNS N07001
DoD Adopted |
| 387 | SAE AS27197A-2008 | 2008-02-01 | English | Seal, Plain, Rubber, (Hot Air Resistant 400 Degree F), Mold in Groove
DoD Adopted |
| 388 | SAE AS27196A-2008 | 2008-02-01 | English | GASKET, RUBBER, FLUID RESISTANT, OILS, SYNTHETIC OILS AND FUELS (-65 TO +400 掳F), MOLD IN GROOVE
DoD Adopted |
| 389 | SAE J1166-2008 | 2008-02-01 | English | (R) Sound Measurement - Off-Road Self-Propelled Work Machines Operator-Work Cycle |
| 390 | SAE AMS-C-27725C-2008 | 2008-02-01 | English | Coating, Corrosion Preventative, for Aircraft Integral Fuel Tanks for Use to 250 掳F (121 掳C)
DoD Adopted |
| 391 | SAE AMS3251J-2008 | 2008-01-01(S 2014) | English | Synthetic Rubber and Cork Composition General Purpose Medium(DoD Adopted) |
| 392 | SAE J2698-2008 | 2008-01-01(R 2018) | English | Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design - Truck and Bus |
| 393 | SAE AS1301E-2008 | 2008-01-01(R 2014) | English | Adapters - Port Connection, Ring Locked Design, Installation and Removal of(DoD Adopted) |
| 394 | SAE ARP5891-2008 | 2008-01-01(R 2014) | English | Achieving Cleanliness Standards for Aircraft Hydraulic Systems During Manufacture |
| 395 | SAE AMS3909B-2008 | 2008-01-01(R 2014) | English | Cloth, Aramid Intermediate Modulus |
| 396 | SAE J2698-2008 | 2008-01-01(R 2014) | English | Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design—Truck and Bus |
| 397 | SAE AMS4414-2008 | 2008-01-01(R 2013) | English | Aluminum Alloy, Hand Forgings 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged - UNS A97085 |
| 398 | SAE AMS4064F-2008 | 2008-01-01(R 2013) | English | Aluminum Alloy, Clad Two Sides Sheet 1.25Mn - 0.12Cu (No. 12-0 Brazing Sheet) Annealed - UNS A83003 |
| 399 | SAE AMS4274A-2008 | 2008-01-01(R 2013) | English | Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-0) Annealed, Fine Grain - UNS A82024 |
| 400 | SAE AMS-QQ-C-320B-2008 | 2008-01-01 | English | Chromium Plating (Electrodeposited)
DoD Adopted |
| 401 | SAE AMS3278A-2008 | 2008-01-01 | English | Sealing and Coating Compound: Polyurethane (PUR) Fuel Resistant High Tensile Strength / Elongation For Integral Fuel Tanks / Fuel Cavities / General Purpose |
| 402 | SAE AIR5359C-2008 | 2008-01-01 | English | Requirements for Certification/Registration of Aerospace Quality Management Systems |
| 403 | SAE ARP4418A-2008 | 2008-01-01 | English | (R) Procedure for Sampling and Measurement of Engine and APU Generated Contaminants in Bleed Air Supplies from Aircraft Engines |
| 404 | SAE AMS5622E-2008 | 2008-01-01 | English | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable Consumable Electrode Remelted - UNS S17400 |
| 405 | SAE AMS2315F-2008 | 2008-01-01 | English | Determination of Delta Ferrite Content
DoD Adopted |
| 406 | SAE AMS7918A-2008 | 2008-01-01 | English | Beryllium Aluminum Alloy Investment Castings 64.9Be - 30Al - 3Ag - 1Co - 0.75Ge As Cast |
| 407 | SAE AMS INDEX-2008 | 2008-01-01 | English | AEROSPACE MATERIAL SPECIFICATIONS INDEX - ISSUED SEMI-ANNUALLY (JANUARY & JULY) |
| 408 | SAE AS85421/14C-2008 | 2008-01-01 | English | FITTING, ELBOW, 90°, BEAM SEAL, 3000/4000 PSI, MALE TO FEMALE |
| 409 | SAE AS85421/5C-2008 | 2008-01-01 | English | FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN AND, BRANCH, SWIVEL NUT ON RUN |
| 410 | SAE AS1301E-2008 | 2008-01-01 | English | Adapters - Port Connection, Ring Locked Design, Installation and Removal of
DoD Adopted |
| 411 | SAE AS85421/6A-2008 | 2008-01-01 | English | FITTING, CROSS, BEAM SEAL, 3000/4000 PSI, MALE ENDS |
| 412 | SAE AS17108A-2008 | 2008-01-01 | English | (R) BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, WIDE CARTRIDGE, TYPE II
DoD Adopted |
| 413 | SAE AS85421/17C-2008 | 2008-01-01 | English | FITTING, TEE, BEAM SEAL, 3000/4000 PSI, BULKHEAD ON BRANCH, MALE ENDS |
| 414 | SAE J2818-2008 | 2008-01-01 | English | Keyword Protocol 1281 |
| 415 | SAE ARP5602/8-2008 | 2008-01-01 | English | A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Technician, Quality Assurance Inspector, or Engineer Hands-on Competencies |
| 416 | SAE ARP5602/7-2008 | 2008-01-01 | English | A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Technician Knowledge Competencies |
| 417 | SAE J1960-2008 | 2008-01-01 | English | Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-cooled Xenon Arc Apparatus |
| 418 | SAE AMS7918A-2008 | 2008-01-01 | English | Beryllium Aluminum Alloy Investment Castings 64.9Be - 30Al - 3Ag - 1Co - 0.75Ge As Cast |
| 419 | SAE ARP5891-2008 | 2008-01-01 | English | Achieving Cleanliness Standards for Aircraft Hydraulic Systems During Manufacture |
| 420 | SAE MAM2355E-2008 | 2008-01-01 | English | Quality Assurance, Sampling and Testing Aluminum Alloys and Magnesium Alloys Wrought Products, Except Forging Stock, and Rolled, Forged, or Flash Welded Rings |
| 421 | SAE J2698-2008 | 2008-01-01 | English | Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design鈥擳ruck and Bus |
| 422 | SAE AMS4955F-2008 | 2008-01-01 | English | Titanium Alloy, Welding Wire 8AI - 1Mo - 1V - UNS R54810 |
| 423 | SAE AMS2485K-2008 | 2008-01-01 | English | Coating, Black Oxide
DoD Adopted |
| 424 | SAE AMS7918A-2008 | 2008-01-01 | English | Beryllium Aluminum Alloy Investment Castings 64.9Be - 30Al - 3Ag - 1Co - 0.75Ge As Cast |
| 425 | SAE MAM2221D-2008 | 2008-01-01 | English | Tolerances, Metric Copper and Copper Alloy Bars and Rods |
| 426 | SAE AS5951C-2008 | 2008-01-01 | English | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35,000 kPa), 275 掳F (135 掳C), Aircraft Hydraulic Systems |
| 427 | SAE AS5978A-2008 | 2008-01-01 | English | (R) FITTING ASSEMBLY, 45掳, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| 428 | SAE J670-2008 | 2008-01-01 | English | (R) Vehicle Dynamics Terminology |
| 429 | SAE J2363-2008 | 2008-01-01 | English | Lubricating Oil for Wheeled Military Vehicles with Heavy-Duty Diesel Engines
DoD Adopted |
| 430 | SAE J2362-2008 | 2008-01-01 | English | Lubricating Oil, Automotive Engine, API Service SM for Military Administrative Service
DoD Adopted |
| 431 | SAE AMS-QQ-A-200/4B-2008 | 2008-01-01 | English | Aluminum Alloy 5083, Bar, Rod, Shapes, Tube, and Wire, Extruded - UNS A95083
DoD Adopted |
| 432 | SAE MAM2224D-2008 | 2008-01-01 | English | Tolerances, Metric Copper and Copper Alloy Wire |
| 433 | SAE MAM2223D-2008 | 2008-01-01 | English | Tolerances, Metric Copper and Copper Alloy Seamless Tubing |
| 434 | SAE MAM2222D-2008 | 2008-01-01 | English | Tolerances, Metric Copper and Copper Alloy Sheet, Strip, and Plate |
| 435 | SAE AS5653-2008 | 2008-01-01 | English | High Speed Network for MIL-STD-1760 |
| 436 | SAE AMS6488H-2008 | 2008-01-01 | English | Steel, Bars and Forgings 5.0Cr - 1.3Mo - 0.5V - (0.38 - 0.43C) - UNS T20811 |
| 437 | SAE AMS3909B-2008 | 2008-01-01 | English | Cloth, Aramid Intermediate Modulus |
| 438 | SAE AMS6469D-2008 | 2008-01-01 | English | Steel, Welding Wire 1.75Mn - 0.78Cr - 2.8Ni - 0.85Mo - (0.09 - 0.12C) Vacuum Melted, Environment-Controlled Packaging
DoD Adopted |
| 439 | SAE AMS4957D-2008 | 2008-01-01 | English | Titanium Alloy, Round Bar and Wire 3AI - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Cold Drawn - UNS R58640
DoD Adopted |
| 440 | SAE AMS4958C-2008 | 2008-01-01 | English | Titanium Alloy Bars and Rods 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Centerless Ground - UNS R58640 |
| 441 | SAE AIR3270-2008 | 2008-01-01 | English | Aircraft Sealant Removal Techniques |
| 442 | SAE J1885-2008 | 2008-01-01 | English | Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus |
| 443 | SAE AMS4963B-2008 | 2008-01-01 | English | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable, Modified Strength - UNS R56400
DoD Adopted |
| 444 | SAE AIR5720-2008 | 2008-01-01 | English | Technical Architecture for Aircraft, Launcher, and Weapon Interoperability (ALWI TA) |
| 445 | SAE AMS3801B-2008 | 2008-01-01 | English | Cloth, Parachute - Meta-Aramid, Low Modulus
DoD Adopted |
| 446 | SAE AMS-QQ-A-200/2A-2008 | 2008-01-01 | English | Aluminum Alloy 2014, Bar, Rod, Shapes, Tube, and Wire, Extruded - UNS A92014
DoD Adopted |
| 447 | SAE AS5976A-2008 | 2008-01-01 | English | FITTING ASSEMBLY, 90掳, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| 448 | SAE AMS6265M-2008 | 2008-01-01 | English | Steel, Bars, Forgings, and Tubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310) Vacuum Consumable Electrode Remelted - UNS G93106
DoD Adopted |
| 449 | SAE ARP1146C-2008 | 2008-01-01 | English | Combination Evacuation Slide/Raft - Civil Air Transport |
| 450 | SAE AMS3250J-2008 | 2008-01-01 | English | Synthetic Rubber and Cork Composition General Purpose Soft
DoD Adopted |
| 451 | SAE AMS3251H-2008 | 2008-01-01 | English | Synthetic Rubber and Cork Composition General Purpose Medium
DoD Adopted |
| 452 | SAE AMS3252J-2008 | 2008-01-01 | English | Synthetic Rubber and Cork Composition, General Purpose, Firm |
| 453 | SAE AMS2649C-2008 | 2008-01-01 | English | Etch Inspection of High Strength Steel Parts |
| 454 | SAE AMS-T-6736B-2008 | 2008-01-01 | English | Tubing, Chrome-Molybdenum (4130 or 8630) Steel, Seamless and Welded
DoD Adopted |
| 455 | SAE AS7003D-2008 | 2008-01-01 | English | (R) Nadcap Program Requirements |
| 456 | SAE AMS5660K-2008 | 2008-01-01 | English | Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode Remelted or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated - UNS N09901
DoD Adopted |
| 457 | SAE AMS4064F-2008 | 2008-01-01 | English | Aluminum Alloy, Clad Two Sides Sheet 1.25Mn - 0.12Cu (No. 12-0 Brazing Sheet) Annealed - UNS A83003
DoD Adopted |
| 458 | SAE AMS4988A-2008 | 2008-01-01 | English | Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated - UNS R56620 |
| 459 | SAE AMS4981E-2008 | 2008-01-01 | English | Titanium Alloy Bars, Wire, and Forgings 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution and Precipitation Heat Treated - UNS R56260
DoD Adopted |
| 460 | SAE AMS4979F-2008 | 2008-01-01 | English | Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Solution and Precipitation Heat Treated - UNS R56620
DoD Adopted |
| 461 | SAE AMS4976G-2008 | 2008-01-01 | English | Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Solution and Precipitation Heat Treated - UNS R54620
DoD Adopted |
| 462 | SAE J1292-2008 | 2008-01-01 | English | (R) Automobile and Motor Coach Wiring
DoD Adopted |
| 463 | SAE AS5792A-2008 | 2008-01-01 | English | (R) FITTING ASSEMBLY, STRAIGHT, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC
DoD Adopted |
| 464 | SAE AMS4414-2008 | 2008-01-01 | English | Aluminum Alloy, Hand Forgings 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged - UNS A97085 |
| 465 | SAE AS5725-2008 | 2008-01-01 | English | Interface Standard, Miniature Mission Store Interface |
| 466 | SAE AMS4274A-2008 | 2008-01-01 | English | Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-0) Annealed, Fine Grain - UNS A82024 |
| 467 | SAE J276-2008 | 2008-01-01 | English | Steering Frame Lock for Articulated Loaders and Tractors
DoD Adopted |
| 468 | SAE AS85421/3C-2008 | 2008-01-01 | English | FITTING, TEE, REDUCER, BEAM SEAL, 3000/4000 PSI, 3 MALE ENDS
DoD Adopted |
| 469 | SAE AS85421/4C-2008 | 2008-01-01 | English | FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN, SWIVEL NUT ON BRANCH
DoD Adopted |
| 470 | SAE AS85421/5C-2008 | 2008-01-01 | English | FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN AND, BRANCH, SWIVEL NUT ON RUN
DoD Adopted |
| 471 | SAE AS85421/6A-2008 | 2008-01-01 | English | FITTING, CROSS, BEAM SEAL, 3000/4000 PSI, MALE ENDS |
| 472 | SAE AS85421/7A-2008 | 2008-01-01 | English | FITTING ASSEMBLY, CROSS, BEAM SEAL, 3000/4000 PSI, 4 FEMALE ENDS |
| 473 | SAE AS85421/8A-2008 | 2008-01-01 | English | FITTING, CROSS, REDUCER, BEAM SEAL 3000/4000 PSI, 4 MALE ENDS |
| 474 | SAE AS85421/9A-2008 | 2008-01-01 | English | FITTING ASSEMBLY, CROSS, REDUCER BEAM SEAL, 3000/4000 PSI, 4 FEMALE ENDS |
| 475 | SAE AS85421/10C-2008 | 2008-01-01 | English | FITTING, ADAPTER, BEAM SEAL, 3000/4000 PSI, MALE TO FLARELESS
DoD Adopted |
| 476 | SAE AS85421/11C-2008 | 2008-01-01 | English | FITTING, UNION, BEAM SEAL, 3000/4000 PSI, MALE ENDS
DoD Adopted |
| 477 | SAE AS85421/12C-2008 | 2008-01-01 | English | FITTING, ELBOW, 90掳, BEAM SEAL, 3000/4000 PSI, MALE TO MALE
DoD Adopted |
| 478 | SAE AS85421/13C-2008 | 2008-01-01 | English | FITTING, ELBOW, 90掳, BEAM SEAL, 3000/4000 PSI, BULKHEAD MALE ENDS
DoD Adopted |
| 479 | SAE AS85421/14C-2008 | 2008-01-01 | English | FITTING, ELBOW, 90掳, BEAM SEAL, 3000/4000 PSI, MALE TO FEMALE
DoD Adopted |
| 480 | SAE AS85421/15C-2008 | 2008-01-01 | English | FITTING, ELBOW, 45掳, BEAM SEAL, 3000/4000 PSI, BULKHEAD, MALE ENDS
DoD Adopted |
| 481 | SAE AS85421/16C-2008 | 2008-01-01 | English | FITTING, TEE, BEAM SEAL, 3000/4000 PSI, BULKHEAD ON RUN, MALE ENDS
DoD Adopted |
| 482 | SAE AS85421/17C-2008 | 2008-01-01 | English | FITTING, TEE, BEAM SEAL, 3000/4000 PSI, BULKHEAD ON BRANCH, MALE ENDS
DoD Adopted |
| 483 | SAE J1330-2007 | 2007-12-01(R 2014) | English | (R) Photometry Laboratory Accuracy Guidelines |
| 484 | SAE AS1424G-2007 | 2007-12-01(R 2014) | English | (R) Hose Assemblies, Metal, Medium Pressure, High Temperature |
| 485 | SAE AMS4287A-2007 | 2007-12-01(R 2013) | English | Aluminum Alloy, Extrusion 2.7 Cu - 1.8 Li - 0.7 Zn - 0.3 Mn - 0.3 Mg - 0.08 Zr (2099-T83) Solution Heat Treated, Stress Relieved by Stretching 1% to 4% and Aged - UNS A92099 |
| 486 | SAE AMS2259E-2007 | 2007-12-01(R 2012) | English | Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels |
| 487 | SAE AS1182C-2007 | 2007-12-01(R 2012) | English | Standard Stock Removal Allowance Aircraft-Quality and Premium Aircraft-Quality Steel Bars and Mechanical Tubing |
| 488 | SAE ARP1820B-2007 | 2007-12-01(R 2012) | English | Chord Method of Evaluating Surface Microstructural Characteristics
DoD Adopted |
| 489 | SAE AS7205-2007 | 2007-12-01(R 2012) | English | Spring Pins, Tubular, Carbon Steel, Procurement Specification for |
| 490 | SAE AMS2745A-2007 | 2007-12-01(R 2012) | English | Induction Hardening of Steel Parts |
| 491 | SAE ARP982D-2007 | 2007-12-01(R 2011) | English | Minimizing Stress-Corrosion Cracking in Wrought Titanium Alloy Products
DoD Adopted |
| 492 | SAE AS7205-2007 | 2007-12-01 | English | Spring Pins, Tubular, Carbon Steel, Procurement Specification for |
| 493 | SAE AMS5400B-2007 | 2007-12-01 | English | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H935) 170 ksi (1172 MPa) Tensile Strength - UNS J92110
DoD Adopted |
| 494 | SAE J525-2007 | 2007-12-01 | English | Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring
DoD Adopted |
| 495 | SAE J2244/1-2007 | 2007-12-01 | English | Connections for Fluid Power and General Use - Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 1: Port with O-Ring Seal in Truncated Housing
DoD Adopted |
| 496 | SAE AS1182C-2007 | 2007-12-01 | English | Standard Stock Removal Allowance Aircraft-Quality and Premium Aircraft-Quality Steel Bars and Mechanical Tubing
DoD Adopted |
| 497 | SAE AMS2745A-2007 | 2007-12-01 | English | Induction Hardening of Steel Parts |
| 498 | SAE J2244-4-2007 | 2007-12-01 | English | Connections for Fluid Power and General Use鈥擯orts and Stud Ends with ISO 261 Threads and O-Ring Sealing鈥擯art 4: Heavy-Duty (S Series) External Hex Port Plugs鈥擠imensions, Design, Test Methods, and Requirements |
| 499 | SAE J2244-3-2007 | 2007-12-01 | English | Connections for Fluid Power and General Use鈥擯orts and Stud Ends with ISO 261 Metric Threads and O-Ring Sealing, Part 3: Light-Duty (L Series) Stud Ends鈥?Dimensions, Design, Test Methods, and Requirements |
| 500 | SAE ARP982D-2007 | 2007-12-01 | English | Minimizing Stress-Corrosion Cracking in Wrought Titanium Alloy Products |
|