| Pos | standard Number | publication date | Language | Description |
| 1 | SAE J695-2011 | 2011-06-01 | English | Turning Ability and Off Tracking - Motor Vehicles - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 2 | SAE J826-1-2011 | 2011-06-01 | English | CAD Model for SAE J826 3-D H-Point Machine - Includes Access to Additional Content |
| 3 | SAE ARP4926B-2011 | 2011-06-01 | English | Alloy Verification and Chemical Composition Inspection of Welding Wire |
| 4 | SAE AS5304-2011 | 2011-06-01 | English | Standard Specification for Turbine Flowmeters |
| 5 | SAE AIR4951-2011 | 2011-06-01 | English | Test Cell Thrust Measurement |
| 6 | SAE J693-2011 | 2011-06-01 | English | Truck Overall Widths Across Dual Tires - This document has been declared "Stabilized" by SAE |
| 7 | SAE J691-2011 | 2011-06-01 | English | Motor Truck CA Dimensions - This document has been declared "Stabilized" by SAE |
| 8 | SAE J648-2011 | 2011-06-01 | English | Automatic Transmission Hydraulic Control Systems - Terminology - This document has been declared "Stabilized" by SAE |
| 9 | SAE AS39029/11A-2011 | 2011-06-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, (FOR AS81659 SERIES 2 CONNECTORS)
DoD Adopted |
| 10 | SAE AS70991B-2011 | 2011-06-01 | English | Terminals: Lug and Splice, Crimp Style, Aluminum, For Aluminum Aircraft Wire
DoD Adopted |
| 11 | SAE AS81935/1A-2011 | 2011-06-01 | English | (R) BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING,WIDE, EXTERNALLY THREADED, -65 TO +325 Degrees F
DoD Adopted |
| 12 | SAE J614-2011 | 2011-06-01 | English | Engine and Transmission Dipstick Marking - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 13 | SAE J586-2011 | 2011-06-01 | English | Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width
DoD Adopted |
| 14 | SAE J254-2011 | 2011-06-01 | English | Instrumentation and Techniques for Exhaust Gas Emissions Measurement - This document has been declared "Stabilized" by SAE |
| 15 | SAE J244-2011 | 2011-06-01 | English | Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines - This document has been declared "Stabilized" by SAE |
| 16 | SAE AS5304-2011 | 2011-06-01 | English | Standard Specification for Turbine Flowmeters |
| 17 | SAE AS3611A-2011 | 2011-06-01 | English | BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN |
| 18 | SAE AS81935/2B-2011 | 2011-06-01 | English | BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, WIDE, INTERNALLY THREADED, -65 TO +325 °F
DoD Adopted |
| 19 | SAE AS81935/4A-2011 | 2011-06-01 | English | (R) BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, NARROW, EXTERNALLY THREADED, -65 TO +325 °F
DoD Adopted |
| 20 | SAE AS81935/5A-2011 | 2011-06-01 | English | BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, NARROW, INTERNALLY THREADED, -65 TO +325 °F
DoD Adopted |
| 21 | SAE AS81935/6A-2011 | 2011-06-01 | English | BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, WIDE, EXTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES)-65 TO +325 °F |
| 22 | SAE AS81935/7A-2011 | 2011-06-01 | English | BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, WIDE, INTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES)-65 TO +325 °F |
| 23 | SAE AS81935/8-2011 | 2011-06-01 | English | BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, NARROW, EXTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES)-65 TO +325 °F |
| 24 | SAE AS81935/9A-2011 | 2011-06-01 | English | BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, NARROW, INTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES)-65 TO +325 °F |
| 25 | SAE AS81935C-2011 | 2011-06-01 | English | Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating, General Specification For (-65 to +325 °F)
DoD Adopted |
| 26 | SAE AS85028A-2011 | 2011-06-01 | English | Connector, Electrical, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, General Specification For
DoD Adopted |
| 27 | SAE J2496-2011 | 2011-06-01 | English | Transport Area Network Cabling - This document has been declared "Stabilized" by SAE |
| 28 | SAE J2956-2011 | 2011-06-01 | English | Occupant Restraint and Equipment Mounting Integrity – Side Impact System-Level Ambulance Patient Compartment |
| 29 | SAE J2848-2-2011 | 2011-06-01 | English | Tire Pressure Systems - Maintenance (ATIS) Type For Medium and Heavy Duty Highway Vehicles |
| 30 | SAE J2568-2011 | 2011-06-01 | English | Intrusion Resistance of Safety Glazing Systems for Road Vehicles |
| 31 | SAE J573-2011 | 2011-06-01 | English | (R) Signal & Marking Light Sources
DoD Adopted |
| 32 | SAE ARP5021A-2011 | 2011-06-01 | English | Oxygen Cylinder Installation Guide |
| 33 | SAE J391-2011 | 2011-06-01 | English | Definition for Particle Size - This document has been declared "Stabilized" by SAE |
| 34 | SAE J1967-2011 | 2011-06-01 | English | (R) Retroreflective Materials for Vehicle Conspicuity |
| 35 | SAE J2760-2011 | 2011-06-01 | English | Pressure Terminology Used In Fuel Cells and Other Hydrogen Vehicle Applications - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 36 | SAE AMS2515F-2011 | 2011-06-01 | English | Polytetrafluoroethylene (PTFE) Resin Coating Low Build, 370 to 400 °C (698 to 752 °F) Fusion
DoD Adopted |
| 37 | SAE AMS3217/4B-2011 | 2011-06-01 | English | Test Slabs, Fluoroelastomer (FKM) 65 - 75
DoD Adopted |
| 38 | SAE AMS4472-2011 | 2011-06-01 | English | Aluminum Alloy, Plate 4.0Cu - 1.0Li - 0.40Mg - 0.35Ag - 0.13Zr (2195-T34) Solution Heat Treated and Stress Relieved - UNS A92195 |
| 39 | SAE AMS4903B-2011 | 2011-06-01 | English | Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated - UNS R56400 |
| 40 | SAE AMS4904B-2011 | 2011-06-01 | English | Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated and Aged - UNS R56400 |
| 41 | SAE AMS5862J-2011 | 2011-06-01 | English | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Consumable Electrode Remelted, Solution Heat Treated Precipitation-Hardenable - UNS S15500
DoD Adopted |
| 42 | SAE AMS6358J-2011 | 2011-06-01 | English | Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) - UNS G87400
DoD Adopted |
| 43 | SAE AMS6440R-2011 | 2011-06-01 | English | Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 - 1.05C) (SAE 52100) For Bearing Applications - UNS G52986
DoD Adopted |
| 44 | SAE AMS6444L-2011 | 2011-06-01 | English | Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 - 1.05C) (SAE 52100) Premium Aircraft-Quality, Consumable Electrode Vacuum Remelted - UNS G52986
DoD Adopted |
| 45 | SAE AMS6447G-2011 | 2011-06-01 | English | Steel, Bars, Forgings, and Tubing 1.4Cr (0.93-1.05C) (SAE 52100) Electroslag Remelted - UNS G52986
DoD Adopted |
| 46 | SAE AMS6479C-2011 | 2011-06-01 | English | Steel, Bars, Forgings, and Tubing 1.45Cr (0.93-1.05C) (SAE 52100) Special Aircraft-Quality Cleanliness - UNS G52986 |
| 47 | SAE AMS7273D-2011 | 2011-06-01 | English | Rubber: Fluorosilicone (FVMQ) High Temperature Fuel and Oil Resistant For Seals In Fuel Systems and Specific Engine Oil Systems
DoD Adopted |
| 48 | SAE AMS7276H-2011 | 2011-06-01 | English | Rubber: Fluorocarbon (FKM) High-Temperature-Fluid Resistant Low Compression Set For Seals In Fuel Systems and Specific Engine Oil Systems
DoD Adopted |
| 49 | SAE AS3625-2011 | 2011-06-01 | English | NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, UNS S66286 SILVER PLATED THREADS ONLY |
| 50 | SAE AS3626-2011 | 2011-06-01 | English | NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, UNS S66286,C’BORE SILVER PLATED THREADS ONLY |
| 51 | SAE AS6093-2011 | 2011-06-01 | English | FITTING, 37° SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 90° |
| 52 | SAE AS85049/87C-2011 | 2011-06-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 53 | SAE AS85049/132-2011 | 2011-06-01 | English | CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELL, 45°, SELF-LOCKING CATEGORY 3B FOR MIL-DTL-38999 SERIES III & SAE AS5590/1 CONNECTORS |
| 54 | SAE J2629-2011 | 2011-06-01 | English | Standard Formats for Presenting Acoustical Data |
| 55 | SAE MA3374B-2011 | 2011-06-01 | English | Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric
DoD Adopted |
| 56 | SAE J835-2011 | 2011-06-01 | English | Split Type Bushings – Design and Application - This document has been declared "Stabilized" by SAE |
| 57 | SAE J875-2011 | 2011-06-01 | English | Trailer Axle Alignment - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 58 | SAE J922-2011 | 2011-06-01 | English | Turbocharger Nomenclature and Terminology - This document has been declared "Stabilized" by SAE |
| 59 | SAE J924-2011 | 2011-06-01 | English | Thrust Washers – Design and Application - This document has been declared "Stabilized" by SAE |
| 60 | SAE J1133-2011 | 2011-06-01 | English | (R) School Bus Stop Arm Lamp |
| 61 | SAE AIR4487A-2011 | 2011-06-01 | English | (R) Investigation of Silver Plated Conductor Corrosion (Red Plague) |
| 62 | SAE AIR6448-2011 | 2011-06-01 | English | Gaining Approval for Seats with Integrated Electronics in Accordance with AC21-49 Option 7b |
| 63 | SAE AMS2370K-2011 | 2011-06-01 | English | Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products and Forging Stock
DoD Adopted |
| 64 | SAE AMS2371J-2011 | 2011-06-01 | English | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock
DoD Adopted |
| 65 | SAE AMS2372F-2011 | 2011-06-01 | English | Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Forgings |
| 66 | SAE AMS2374E-2011 | 2011-06-01 | English | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steel and Alloy Forgings |
| 67 | SAE AMS2452-2011 | 2011-06-01 | English | Superfinishing of HVOF Applied Tungsten Carbide Coatings |
| 68 | SAE AMS3301H-2011 | 2011-06-01 | English | Silicone, Rubber General Purpose 40 Durometer
DoD Adopted |
| 69 | SAE AMS3302H-2011 | 2011-06-01 | English | Silicone Rubber General Purpose 50 Durometer
DoD Adopted |
| 70 | SAE AMS3303K-2011 | 2011-06-01 | English | Silicone, Rubber General Purpose 60 Durometer
DoD Adopted |
| 71 | SAE AMS3673C-2011 | 2011-06-01 | English | Cloth, Glass Aluminum Face, Silicone Rubber Back |
| 72 | SAE AMS3801/1B-2011 | 2011-06-01 | English | Cloth, Parachute, Meta-Aramid, Low Modulus 4.7 (159) Weight, Twill
DoD Adopted |
| 73 | SAE AMS3801/2B-2011 | 2011-06-01 | English | Cloth, Parachute, Meta-Aramid, Low Modulus 6.5(220) Weight, Special Weave
DoD Adopted |
| 74 | SAE AMS3801/3B-2011 | 2011-06-01 | English | Cloth, Parachute, Meta-Aramid, Low Modulus 12.0(407) Weight, Special Weave
DoD Adopted |
| 75 | SAE AMS3801/4B-2011 | 2011-06-01 | English | Cloth, Parachute, Meta-Aramid, Low Modulus 7.0(237) Weight, Plain Weave
DoD Adopted |
| 76 | SAE AMS3801/5B-2011 | 2011-06-01 | English | Cloth, Parachute, Meta-Aramid, Low Modulus 18.0(610) Weight, Basket Weave, Resin Treated
DoD Adopted |
| 77 | SAE AMS3801C-2011 | 2011-06-01 | English | Cloth, Parachute - Meta-Aramid, Low Modulus
DoD Adopted |
| 78 | SAE AMS4901S-2011 | 2011-06-01 | English | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa) - UNS R50700 |
| 79 | SAE AMS4928S-2011 | 2011-06-01 | English | Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed - UNS R56400
DoD Adopted |
| 80 | SAE AMS4930G-2011 | 2011-06-01 | English | Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 4V, Extra Low Interstitial Annealed - UNS R56401
DoD Adopted |
| 81 | SAE AMS4945E-2011 | 2011-06-01 | English | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved - UNS R56320 |
| 82 | SAE AMS4950C-2011 | 2011-06-01 | English | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged Modified Strength - UNS R56400 |
| 83 | SAE AMS4964B-2011 | 2011-06-01 | English | Titanium Alloy Bars, Wire, Forgings, and Rings 4.5Al - 3V - 2Fe - 2Mo Annealed |
| 84 | SAE AMS4965K-2011 | 2011-06-01 | English | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0AI - 4.0V Solution Heat Treated and Aged - UNS R56400
DoD Adopted |
| 85 | SAE AMS4967K-2011 | 2011-06-01 | English | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable - UNS R56400
DoD Adopted |
| 86 | SAE AMS4975K-2011 | 2011-06-01 | English | Titanium Alloy, Bars, Wire, and Rings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 0.08Si Solution and Precipitation Heat Treated - UNS R54620
DoD Adopted |
| 87 | SAE AMS4978F-2011 | 2011-06-01 | English | Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed - UNS R56620
DoD Adopted |
| 88 | SAE AMS5646N-2011 | 2011-06-01 | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11 Ni - 0.60Cb(Nb) (347) Solution Heat Treated - UNS S34700
DoD Adopted |
| 89 | SAE AMS6263L-2011 | 2011-06-01 | English | Steel Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) - UNS K44414 |
| 90 | SAE AMS6274P-2011 | 2011-06-01 | English | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) - UNS G86200
DoD Adopted |
| 91 | SAE AMS6276K-2011 | 2011-06-01 | English | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Consumable Electrode Vacuum Remelted - UNS G86200
DoD Adopted |
| 92 | SAE AMS6277G-2011 | 2011-06-01 | English | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Arc or Electroslag Remelted - UNS G86200
DoD Adopted |
| 93 | SAE AMS6278D-2011 | 2011-06-01 | English | Steel, Bars, Forgings, and Tubing 4.1Cr - 3.4Ni - 4.2Mo - 1.2V (0.11 - 0.15C) Premium Aircraft-Quality for Bearing Applications Double Vacuum Melted - UNS K91231
DoD Adopted |
| 94 | SAE AMS6532E-2011 | 2011-06-01 | English | Steel, Bars and Forgings 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted, Normalized and Overaged Precipitation Hardenable - UNS K92580
DoD Adopted |
| 95 | SAE AMS6543E-2011 | 2011-06-01 | English | Steel, Bars and Forgings 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) (HY-180) Double Vacuum Melted Solution Heat Treated, Marage Hardenable - UNS K91970
DoD Adopted |
| 96 | SAE AMS6901A-2011 | 2011-06-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 5Al - 2.5Sn, Extra Low Interstitial Annealed - UNS R54521 |
| 97 | SAE AMS6906A-2011 | 2011-06-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution Heat Treated and Aged - UNS R56260 |
| 98 | SAE AMS6910A-2011 | 2011-06-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 8Al - 1Mo - 1V Duplex Annealed - UNS R54810 |
| 99 | SAE AMS6915A-2011 | 2011-06-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 7.0Al - 4.0Mo Annealed - UNS R56740 |
| 100 | SAE AMS6920B-2011 | 2011-06-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated - UNS R58640 |
| 101 | SAE AMS6921A-2011 | 2011-06-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated and Aged - UNS R58640 |
| 102 | SAE AMS6925A-2011 | 2011-06-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated - UNS R58010 |
| 103 | SAE AMS6926A-2011 | 2011-06-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated and Aged - UNS R58010 |
| 104 | SAE AMS6930B-2011 | 2011-06-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al – 4.0V Solution Heat Treated and Aged - UNS R56400 |
| 105 | SAE AMS6931B-2011 | 2011-06-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Annealed - UNS R56400 |
| 106 | SAE AMS6932A-2011 | 2011-06-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al – 4.0V Extra Low Interstitial Annealed - UNS R56401 |
| 107 | SAE AMS6935A-2011 | 2011-06-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al – 6.0V – 2.0Sn Solution Heat Treated and Aged - UNS R56620 |
| 108 | SAE AMS6936A-2011 | 2011-06-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 6Al - 6V - 2Sn Annealed - UNS R56620 |
| 109 | SAE AMS7320F-2011 | 2011-06-01 | English | Rings, Sealing, Cast Leaded-Tin Bronze 80Cu – 16Sn – 5Pb As Cast - UNS C92800
DoD Adopted |
| 110 | SAE J887-2011 | 2011-06-01 | English | School Bus Warning Lamp |
| 111 | SAE AS85049/132-2011 | 2011-06-01 | English | CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELL, 45°, SELF-LOCKING CATEGORY 3B FOR MIL-DTL-38999 SERIES III & SAE AS5590/1 CONNECTORS |
| 112 | SAE AMS2374E-2011 | 2011-06-01 | English | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steel and Alloy Forgings |
| 113 | SAE J1133-2011 | 2011-06-01 | English | School Bus Stop Arm Lamp |
| 114 | SAE AMS2452-2011 | 2011-06-01 | English | Superfinishing of HVOF Applied Tungsten Carbide Coatings |
| 115 | SAE AS645A-2011 | 2011-06-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARED, 90° TO 90° |
| 116 | SAE ARP4926B-2011 | 2011-06-01 | English | Alloy Verification and Chemical Composition Inspection of Welding Wire |
| 117 | SAE ARP6402-2011 | 2011-06-01 | English | LED Landing, Taxiing, Runway Turnoff, and Recognition Lights |
| 118 | SAE AS640A-2011 | 2011-06-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARED, STRAIGHT TO STRAIGHT |
| 119 | SAE AS641A-2011 | 2011-06-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARED, STRAIGHT TO 45° |
| 120 | SAE AS642A-2011 | 2011-06-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARED, STRAIGHT TO 90° |
| 121 | SAE AS643A-2011 | 2011-06-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARED, 45° TO 45° |
| 122 | SAE AS644A-2011 | 2011-06-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARED, 45° TO 90° |
| 123 | SAE J1939-81-2011 | 2011-06-01 | English | (R) Network Management |
| 124 | SAE AS647C-2011 | 2011-06-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, STRAIGHT TO STRAIGHT |
| 125 | SAE J1752-3-2011 | 2011-06-01 | English | Measurement of Radiated Emissions from Integrated Circuits—TEM/Wideband TEM (GTEM) Cell Method; TEM Cell (150 kHz to 1 GHz), Wideband TEM Cell (150 kHz to 8 GHz) |
| 126 | SAE AS648C-2011 | 2011-06-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, STRAIGHT TO 45° |
| 127 | SAE AS649C-2011 | 2011-06-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, STRAIGHT TO 90° |
| 128 | SAE AS650C-2011 | 2011-06-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, 45° TO 45° |
| 129 | SAE AS651C-2011 | 2011-06-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, 45° TO 90° |
| 130 | SAE AIR4951-2011 | 2011-06-01 | English | Test Cell Thrust Measurement |
| 131 | SAE AS652C-2011 | 2011-06-01 | English | (R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, 90° TO 90° |
| 132 | SAE AS1065A-2011 | 2011-06-01 | English | Quality & Serviceability Requirements for Aircraft Cylinder Assemblies Charged with Aviator’s Breathing Oxygen - This document has been declared "Stabilized" by SAE |
| 133 | SAE AS81935/4B-2011 | 2011-06-01 | English | (R) BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, NARROW, EXTERNALLY THREADED, -65 TO +325 °F(DoD Adopted) |
| 134 | SAE AS8034B-2011 | 2011-06-01 | English | (R) Minimum Performance Standard for Airborne Multipurpose Electronic Displays |
| 135 | SAE J2901-2011 | 2011-06-01 | English | Misfire Generator Functional Requirements |
| 136 | SAE AMS-R-3065A-2011 | 2011-05-01 | English | Rubber, Fabricated Products |
| 137 | SAE AS85049/96C-2011 | 2011-05-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, CATEGORY 7, 1/4 PERIMETER |
| 138 | SAE AMS6312H-2011 | 2011-05-01 | English | Steel Bars, Forgings, and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) - UNS K22440 |
| 139 | SAE AS85049/47D-2011 | 2011-05-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90掳, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 140 | SAE ARP4868A-2011 | 2011-05-01 | English | (R) Function-Based API for Gas Turbine Engine Performance Programs |
| 141 | SAE AMS7909B-2011 | 2011-05-01 | English | Aluminum Beryllium, NNS Preforms Hot Isostatic Pressed 38Al - 62Be |
| 142 | SAE AMS6476D-2011 | 2011-05-01 | English | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.12Mo (0.89 - 1.01C) - UNS K19526
DoD Adopted |
| 143 | SAE AS6075-2011 | 2011-05-01 | English | FITTING, BOLT, FLARED, 37掳 SPHERICAL |
| 144 | SAE AS6092-2011 | 2011-05-01 | English | FITTING, 37掳 SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 75掳 |
| 145 | SAE AS6094-2011 | 2011-05-01 | English | FITTING, 37掳 SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 45掳 |
| 146 | SAE AS6095-2011 | 2011-05-01 | English | FITTING, 37掳 SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, TEE |
| 147 | SAE AS6098-2011 | 2011-05-01 | English | FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL ON SIDE, FLARED, 37掳 SPHERICAL |
| 148 | SAE AMS6425C-2011 | 2011-05-01 | English | Steel, Bars, Forgings, and Tubing 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C) Consumable Electrode Vacuum Melted - UNS K32550
DoD Adopted |
| 149 | SAE AMS6422J-2011 | 2011-05-01 | English | Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified 98BV40) - UNS K11940
DoD Adopted |
| 150 | SAE AMS6421F-2011 | 2011-05-01 | English | Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B (0.35 - 0.40C) (Modified 98B37)
DoD Adopted |
| 151 | SAE AMS6419G-2011 | 2011-05-01 | English | Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.45C) Consumable Electrode Vacuum Remelted - UNS K44220
DoD Adopted |
| 152 | SAE AMS6417G-2011 | 2011-05-01 | English | Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C) Consumable Electrode Vacuum Remelted
DoD Adopted |
| 153 | SAE AMS6257E-2011 | 2011-05-01 | English | Steel Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) Consumable Electrode Vacuum Remelted Normalized and Tempered - UNS K44220
DoD Adopted |
| 154 | SAE J1860-2011 | 2011-05-01 | English | Labeling Air Brake Valves with Their Performance (Input-Output) characteristics |
| 155 | SAE J1859-2011 | 2011-05-01 | English | Test Procedures for Determining Air Brake Valve Input-Output Characteristics |
| 156 | SAE J1802-1-2011 | 2011-05-01 | English | Test Component Specifications |
| 157 | SAE J1490-2011 | 2011-05-01 | English | Measurement and Presentation of Truck Ride Vibrations - This document has been declared "Stabilized" by SAE |
| 158 | SAE J1231-2011 | 2011-05-01 | English | (R) Formed Tube Ends for Hose Connections and Hose Fittings
DoD Adopted |
| 159 | SAE J858-2011 | 2011-05-01 | English | Electrical Terminals Blade Type - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 160 | SAE J683-2011 | 2011-05-01 | English | Tire Chain Clearance - Trucks, Buses (Except Suburban, Intercity, and Transit Buses), and Combinations of Vehicles - This document has been declared "Stabilized" by the SAE
DoD Adopted |
| 161 | SAE J682-2011 | 2011-05-01 | English | Rear Wheel Splash and Stone Throw Protection - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 162 | SAE J662-2011 | 2011-05-01 | English | Brake Block Chamfer - This document has been declared "Stabilized" by SAE |
| 163 | SAE AS85049/33B-2011 | 2011-05-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELDED TERMINATION, CATEGORY 3C (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 164 | SAE AS85049/32B-2011 | 2011-05-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90掳, SHIELDED TERMINATION, CATEGORY 3C (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 165 | SAE AS20708/20A-2011 | 2011-05-01 | English | (R) Synchro, Control Transmitter, Type 15CX6C
DoD Adopted |
| 166 | SAE AMS6370N-2011 | 2011-05-01 | English | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) - UNS G41300
DoD Adopted |
| 167 | SAE AMS6357K-2011 | 2011-05-01 | English | Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (8735) - UNS G87350 |
| 168 | SAE AMS6250L-2011 | 2011-05-01 | English | Steel Bars, Forgings, and Tubing 1.5Cr - 3.5Ni (0.07 - 0.13 C) (3310) - UNS K44910
DoD Adopted |
| 169 | SAE AMS5654F-2011 | 2011-05-01 | English | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11Ni - 0.60Cb (Nb) (347) Premium Aircraft Quality, Consumable Electrode Melted Solution Heat Treated - UNS S34700 |
| 170 | SAE AMS6356G-2011 | 2011-05-01 | English | Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo - (0.30 - 0.35C)(4132) - UNS G41300
DoD Adopted |
| 171 | SAE AMS6351H-2011 | 2011-05-01 | English | Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Spheroidized - UNS G41300
DoD Adopted |
| 172 | SAE AMS5653G-2011 | 2011-05-01 | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 17Cr - 12Ni - 2.5Mo (0.030 Max C) (316L) Solution Heat Treated - UNS S31603
DoD Adopted |
| 173 | SAE AMS5647J-2011 | 2011-05-01 | English | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 19Cr - 9.5Ni Solution Heat Treated - UNS S30403
DoD Adopted |
| 174 | SAE AMS5350J-2011 | 2011-05-01 | English | Steel, Corrosion and Moderate Heat-Resistant, Investment Castings 12.5Cr (SAE 51410) Hardened and Tempered - UNS J91152
DoD Adopted |
| 175 | SAE AIR1823B-2011 | 2011-05-01 | English | Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS |
| 176 | SAE AMS4987D-2011 | 2011-05-01 | English | Titanium Alloy, Forgings 10V - 2Fe - 3AI Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 140 ksi (965 MPa) Tensile Strength - UNS R56410 |
| 177 | SAE AMS4986D-2011 | 2011-05-01 | English | Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 160 ksi (1103 MPa) Tensile Strength - UNS R56410 |
| 178 | SAE AMS4983E-2011 | 2011-05-01 | English | Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Aged 180 ksi (1241 MPa) Tensile Strength - UNS R56410
DoD Adopted |
| 179 | SAE AMS6350L-2011 | 2011-05-01 | English | Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) - UNS G41300
DoD Adopted |
| 180 | SAE J1264-2011 | 2011-05-01 | English | Joint RCCC/SAE Fuel Consumption Test Procedure (Short Term In-Service Vehicle) Type 1 - This document has been declared "Stabilized" by SAE |
| 181 | SAE AMS6300F-2011 | 2011-05-01 | English | Steel Bars and Forgings 0.25Mo (0.35 - 0.40C) (SAE 4037) - UNS G40370
DoD Adopted |
| 182 | SAE AIR6151-2011 | 2011-05-01 | English | Torque, Threaded Application, Electrical Connector and Accessory Installation |
| 183 | SAE AIR1678B-2011 | 2011-05-01 | English | Uncertainty of In-Flight Thrust Determination |
| 184 | SAE AMS4944J-2011 | 2011-05-01 | English | Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved - UNS R56320
DoD Adopted |
| 185 | SAE AMS4934F-2011 | 2011-05-01 | English | Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 4V Solution Heat Treated and Aged - UNS R56400 |
| 186 | SAE AMS4920E-2011 | 2011-05-01 | English | Titanium Alloy, Forgings 6AI - 4V Alpha-Beta or Beta Processed, Annealed - UNS R56400 |
| 187 | SAE AMS4640H-2011 | 2011-05-01 | English | Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50) - UNS C63000
DoD Adopted |
| 188 | SAE AMS4417B-2011 | 2011-05-01 | English | Castings, Sand, Magnesium Alloy 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21 - T6) Solution and Precipitation Heat Treated - UNS M18330 |
| 189 | SAE AMS4154P-2011 | 2011-05-01 | English | Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T6510, 7075-T6511) Solution Heat Treated, Stress Relieved by Stretching When Required and Precipitation Heat Treated - UNS A97075 |
| 190 | SAE AMS4085D-2011 | 2011-05-01 | English | Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged - UNS A97475
DoD Adopted |
| 191 | SAE AMS4031H-2011 | 2011-05-01 | English | Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-0) Annealed or when specified, 鈥淎s Fabricated鈥?(2219-F) - UNS A92219 |
| 192 | SAE AMS3220G-2011 | 2011-05-01 | English | Rubber, Synthetic General Purpose, Fluid Resistant 55 - 65
DoD Adopted |
| 193 | SAE AMS3195F-2011 | 2011-05-01 | English | Silicone Rubber Sponge Closed Cell, Medium
DoD Adopted |
| 194 | SAE AMS3194D-2011 | 2011-05-01 | English | Silicone Rubber Sponge Closed Cell, Firm, Extreme Low Temperature
DoD Adopted |
| 195 | SAE AMS3193D-2011 | 2011-05-01 | English | Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature
DoD Adopted |
| 196 | SAE J2847-1-2011 | 2011-05-01 | English | (R) Communication between Plug-in Vehicles and the Utility Grid |
| 197 | SAE J2646-2011 | 2011-05-01 | English | Cab Air-Conditioning Test Procedure鈥擧eavy Trucks with and without Sleepers |
| 198 | SAE J2494-1-2011 | 2011-05-01 | English | Dimensional Specifications for Metallic Body Push-to-Connect Fittings Used on a Vehicular Air Brake System |
| 199 | SAE AS39029/32B-2011 | 2011-05-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 1, MIL-DTL-26500 AND MIL-DTL-26518 CONNECTORS)
DoD Adopted |
| 200 | SAE AS39029/31B-2011 | 2011-05-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 1, MIL-DTL-26500 AND MIL-DTL-26518 CONNECTORS)
DoD Adopted |
| 201 | SAE AS5272E-2011 | 2011-05-01 | English | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| 202 | SAE ARP1971C-2011 | 2011-05-01 | English | (R) Aircraft Deicing Vehicle 鈥?Self-Propelled |
| 203 | SAE J2310-2011 | 2011-05-01 | English | (R) Rectangular Cross Section Polymeric Sealing Rings |
| 204 | SAE AIR1678B-2011 | 2011-05-01 | English | Uncertainty of In-Flight Thrust Determination |
| 205 | SAE J2178-3-2011 | 2011-05-01 | English | Class B Data Communication Network Messages - Part 3 - Frame IDs for Single-Byte Forms of Headers - This document has been declared "Stabilized" by SAE |
| 206 | SAE AMS-B-20148B-2011 | 2011-05-01 | English | Brazing Sheet, Aluminum Alloy
DoD Adopted |
| 207 | SAE J1555-2011 | 2011-05-01 | English | (R) Recommended Practice for Optimizing Automobile Damageability and Repairability |
| 208 | SAE AS85049/96C-2011 | 2011-05-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, CATEGORY 7, 1/4 PERIMETER
DoD Adopted |
| 209 | SAE AS85049/94C-2011 | 2011-05-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, CATEGORY 7, FULL PERIMETER
DoD Adopted |
| 210 | SAE J2376-2011 | 2011-05-01 | English | New-Vehicle Collision Repair Information |
| 211 | SAE AIR6130-2011 | 2011-05-01 | English | Cadmium Plate Cyclic Corrosion Test |
| 212 | SAE AIR6082-2011 | 2011-05-01 | English | Calculations to Determine Dimensions for Backup Rings to AS5781, AS5782, AS5860, AS5861 |
| 213 | SAE J2245-2011 | 2011-05-01 | English | Recommended Practice for Splash and Spray Evaluation - This document has been declared "Stabilized" by SAE |
| 214 | SAE J2180-2011 | 2011-05-01 | English | A Tilt Table Procedure for Measuring the Static Rollover Threshold for Heavy Trucks - This document has been declared "Stabilized" by SAE |
| 215 | SAE J1961-2011 | 2011-05-01 | English | Accelerated Exposure of Automotive Exterior Materials Using a Solar Fresnel Reflector Apparatus |
| 216 | SAE AIR1678B-2011 | 2011-05-01 | English | Uncertainty of In-Flight Thrust Determination |
| 217 | SAE AS85049/96C-2011 | 2011-05-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, CATEGORY 7, 1/4 PERIMETER |
| 218 | SAE J1939-75-2011 | 2011-05-01 | English | Application Layer鈥擥enerator Sets and Industrial |
| 219 | SAE J948-2011 | 2011-05-01 | English | Test Method for Determining Resistance to Abrasion of Automotive Bodycloth, Vinyl, and Leather, and the Snagging of Automotive Bodycloth |
| 220 | SAE J953-2011 | 2011-05-01 | English | Passenger Car Backlight Defogging System - This document has been declared "Stabilized" by SAE |
| 221 | SAE J1530-2011 | 2011-05-01 | English | Test Method for Determining Resistance to Fiber Loss, Resistance to Abrasion and Bearding of Automotive Carpet Materials |
| 222 | SAE J1771-2011 | 2011-05-01 | English | Criteria for Refrigerant Identification Equipment for Use with Mobile Air-Conditioning Systems - This document has been declared "Stabilized" by SAE |
| 223 | SAE J1939-01-2011 | 2011-05-01 | English | (R) On-Highway Equipment Control and Communication Network |
| 224 | SAE J1989-2011 | 2011-05-01 | English | Recommended Service Procedure for the Containment of CFC-12 (R-12) - This document has been declared "Stabilized" by SAE |
| 225 | SAE J1990-2011 | 2011-05-01 | English | Recovery and Recycle Equipment for Mobile Automotive Air-Conditioning Systems - This document has been declared "Stabilized" by SAE |
| 226 | SAE J2629-2011 | 2011-05-01 | English | Standard Formats for Presenting Acoustical Data |
| 227 | SAE J2661-2011 | 2011-05-01 | English | Optical Imaging Evaluation of Impact Damage Resistance Testing on Exterior Finishes |
| 228 | SAE JA1010-1-2011 | 2011-05-01 | English | (R) Maintainability Program Standard Implementation Guide |
| 229 | SAE J638-2011 | 2011-05-01 | English | Motor Vehicle Heater Test Procedure - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 230 | SAE AS5272E-2011 | 2011-05-01 | English | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| 231 | SAE J537-2011 | 2011-05-01 | English | Storage Batteries
DoD Adopted |
| 232 | SAE AS5725A-2011 | 2011-05-01 | English | Interface Standard, Miniature Mission Store Interface |
| 233 | SAE ARP5526C-2011 | 2011-05-01 | English | (R) Aircraft Seat Design Guidance and Clarifications |
| 234 | SAE R-397-2011 | 2011-04-12 | English | Vehicle Accident Analysis and Reconstruction Methods - Second Edition; Incorporated Errata: 4/12/2011; To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 235 | SAE PT-147-2011 | 2011-04-11 | English | Active Safety and the Mobility Industry - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 236 | SAE PT-150-2011 | 2011-04-05 | English | Pregnant Occupant Biomechanics - Advances in Automobile Safety Research - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 237 | SAE AMS5552G-2011 | 2011-04-01 | English | Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 46Fe - 20.5Cr - 32Ni - 1.1Ti Annealed - UNS N08801
DoD Adopted |
| 238 | SAE ARP6253-2011 | 2011-04-01 | English | LEDs and Aircraft Applications |
| 239 | SAE AIR5487B-2011 | 2011-04-01 | English | (R) Aircraft Tire History |
| 240 | SAE AMS-S-83318B-2011 | 2011-04-01 | English | Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks and Fuel Cell Cavities
DoD Adopted |
| 241 | SAE AS85049/90B-2011 | 2011-04-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 242 | SAE AS85049/95C-2011 | 2011-04-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, CATEGORY 7, 3/4 PERIMETER
DoD Adopted |
| 243 | SAE AMS4490J-2011 | 2011-04-01 | English | Magnesium Alloy Castings, Die 9.0Al - 0.70Zn (AZ91D, Temper F) As Cast - UNS M11916 |
| 244 | SAE AMS5387E-2011 | 2011-04-01 | English | Alloy, Corrosion and Heat Resistant, Investment Castings 60Co - 29Cr - 4.5W As Cast - UNS R30006
DoD Adopted |
| 245 | SAE AMS5802D-2011 | 2011-04-01 | English | Iron-Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 41Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.5Ti Vacuum Melted, Low Expansion - UNS N19907
DoD Adopted |
| 246 | SAE J1803-2011 | 2011-04-01 | English | Seat Belt Restraint System Hardware—Glossary of Terms |
| 247 | SAE J1939-2011 | 2011-04-01 | English | Serial Control and Communications Heavy Duty Vehicle Network - Top Level Document - See SAE CS 1939 for Companion Spreadsheet |
| 248 | SAE J1986-2011 | 2011-04-01 | English | (R) Balance Weight and Rim Flange Design Specifications, Test Procedures, and Performance Recommendations |
| 249 | SAE J2178-1-2011 | 2011-04-01 | English | Class B Data Communication Network Messages - Detailed Header Formats and Physical Address Assignments - This document has been declared "Stabilized" by SAE |
| 250 | SAE J2178-2-2011 | 2011-04-01 | English | Class B Data Communication Network Messages - Part 2: Data Parameter Definitions - This document has been declared "Stabilized" by SAE |
| 251 | SAE J2178-4-2011 | 2011-04-01 | English | Class B Data Communication Network Messages - Message Definitions for Three Byte Headers - This document has been declared "Stabilized" by SAE |
| 252 | SAE AS81824/12-2011 | 2011-04-01 | English | SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, TIN-COATED COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1, 150 ºC, HEATLESS SEALING |
| 253 | SAE AS20218A-2011 | 2011-04-01 | English | (R) BEARING, BALL, ANTI-FRICTION, AIRFRAME
DoD Adopted |
| 254 | SAE AMS3970/3A-2011 | 2011-04-01 | English | (R) Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 3 - Purchasing Specification for Carbon Prepreg |
| 255 | SAE AMS3970A-2011 | 2011-04-01 | English | (R) Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 0 - Introduction |
| 256 | SAE J643-2011 | 2011-04-01 | English | (R) Hydrodynamic Drive Test Code |
| 257 | SAE AMS4221D-2011 | 2011-04-01 | English | Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated - UNS A92124 |
| 258 | SAE AMS4183A-2011 | 2011-04-01 | English | Aluminum Alloy, Extruded Profiles (2027-T3511) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated and Stress Relieved by Stretching - UNS A92027 |
| 259 | SAE AMS3970/1A-2011 | 2011-04-01 | English | Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 1 - General Requirements |
| 260 | SAE AMS5387E-2011 | 2011-04-01 | English | Alloy, Corrosion and Heat Resistant, Investment Castings 60Co - 29Cr - 4.5W As Cast - UNS R30006 |
| 261 | SAE AIR5487B-2011 | 2011-04-01 | English | (R) Aircraft Tire History |
| 262 | SAE AIR4830A-2011 | 2011-04-01 | English | (R) Aircraft Tire Pressure Monitoring Systems |
| 263 | SAE AMS3970/2A-2011 | 2011-04-01 | English | Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 2 - Qualification Program for Fiber, Fabric, Carbon Prepreg, Film Adhesive and Non-Structural Glass Prepreg |
| 264 | SAE AMS3970/5-2011 | 2011-04-01 | English | Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 5 - Purchasing Specification for Companion Non-Structural Glass Fiber Fabric Prepreg |
| 265 | SAE AMS3970/4A-2011 | 2011-04-01 | English | Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive |
| 266 | SAE AMS3970/6-2011 | 2011-04-01 | English | Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 6 - Material Specification: Carbon Fiber Fabric Reinforced Epoxy Prepreg for Repair, Plain Weave Fabric, 193 g/m2, Adhesive Film for Repair and Non-Structural Glass Fiber Fabric Reinfo |
| 267 | SAE AMS3970A-2011 | 2011-04-01 | English | (R) Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 0 - Introduction |
| 268 | SAE AMS4183A-2011 | 2011-04-01 | English | Aluminum Alloy, Extruded Profiles (2027-T3511) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated and Stress Relieved by Stretching - UNS A92027 |
| 269 | SAE AS4167B-2011 | 2011-04-01 | English | (R) Wrenches; Flare Nut, Crowfoot, 12 Point Non-distorting
DoD Adopted |
| 270 | SAE AMS3970/5-2011 | 2011-04-01 | English | Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 5 - Purchasing Specification for Companion Non-Structural Glass Fiber Fabric Prepreg |
| 271 | SAE AIR4830A-2011 | 2011-04-01 | English | (R) Aircraft Tire Pressure Monitoring Systems |
| 272 | SAE AS85896A-2011 | 2011-04-01 | English | Ladder, Aircraft Maintenance, Aluminum, Three-Way Combination (Step, Straight and Extension), General Specification for |
| 273 | SAE AMS3970/4A-2011 | 2011-04-01 | English | (R) Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive |
| 274 | SAE AS85049/138A-2011 | 2011-04-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, CAP, DUST, PLASTIC, CATEGORY 9 |
| 275 | SAE AS31021A-2011 | 2011-04-01 | English | (R) CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, SOLDER CONTACTS, AN TYPE
DoD Adopted |
| 276 | SAE AMS3970/6-2011 | 2011-04-01 | English | Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 6 - Material Specification: Carbon Fiber Fabric Reinforced Epoxy Prepreg for Repair, Plain Weave Fabric, 193 g/m2, Adhesive Film for Repair and Non-Structural Glass Fiber Fabric Reinfo |
| 277 | SAE J646-2011 | 2011-04-01 | English | (R) Planetary Gears - Terminology |
| 278 | SAE AMS3175A-2011 | 2011-04-01 | English | Non-Chromated Surface Pretreatment Prior to Painting |
| 279 | SAE AS7788A-2011 | 2011-04-01 | English | Panels, Information, Integrally Illuminated
DoD Adopted |
| 280 | SAE AS5379A-2011 | 2011-04-01 | English | Valves, Safety, Cabin Air, General Specification For
DoD Adopted |
| 281 | SAE EIA-649B-2011 | 2011-04-01 | English | Configuration Management Standard - Formerly TechAmerica EIA-649-B |
| 282 | SAE USCAR-40-2011 | 2011-04-01 | English | Lead-Free Solder Validation Test Plan |
| 283 | SAE J1661-2011 | 2011-04-01 | English | Procedure Retrofitting CFC-12 (R-12) Mobile Air-Conditioning Systems to HFC-134a (R-134a) - This document has been declared "Stabilized" by SAE |
| 284 | SAE J1660-2011 | 2011-04-01 | English | Fittings and Labels for Retrofit of CFC-12 (R-12) Mobile Air-Conditioning Systems to HFC-134a (R-134a) - This document has been declared "Stabilized" by SAE |
| 285 | SAE J1657-2011 | 2011-04-01 | English | Selection Criteria for Retrofit Refrigerants to Replace CFC-12 (R-12) in Mobile Air-Conditioning Systems - This document has been declared "Stabilized" by SAE |
| 286 | SAE J1627-2011 | 2011-04-01 | English | Performance Criteria for Electronic Refrigerant Leak Detectors - This document has been declared "Stabilized" by SAE |
| 287 | SAE J183-2011 | 2011-04-01 | English | (R) Engine Oil Performance and Engine Service Classification (Other than "Energy Conserving")
DoD Adopted |
| 288 | SAE J179-2011 | 2011-04-01 | English | Labeling - Disc Wheels and Demountable Rims - Trucks - This document has been declared "Stabilized" by SAE |
| 289 | SAE AS85049/50B-2011 | 2011-04-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, CATEGORY 4C (FOR MIL-DTL-24308 CONNECTORS)
DoD Adopted |
| 290 | SAE AMS6413L-2011 | 2011-04-01 | English | Steel, Mechanical Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337) - UNS G43370 |
| 291 | SAE AMS6396E-2011 | 2011-04-01 | English | Steel Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) Annealed - UNS K22950
DoD Adopted |
| 292 | SAE AMS4285E-2011 | 2011-04-01 | English | Aluminum Alloy Castings, Centrifugal 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated - UNS A03560 |
| 293 | SAE AMS3970/2A-2011 | 2011-04-01 | English | (R) Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 2 - Qualification Program for Fiber, Fabric, Carbon Prepreg, Film Adhesive and Non-Structural Glass Prepreg |
| 294 | SAE AMS3970/1A-2011 | 2011-04-01 | English | (R) Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 1 - General Requirements |
| 295 | SAE AMS-QQ-A-367B-2011 | 2011-04-01 | English | Aluminum Alloy Forgings
DoD Adopted |
| 296 | SAE R-399-2011 | 2011-03-29 | English | Brake NVH Testing and Measurements - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 297 | SAE T-125-2011 | 2011-03-16 | English | Hybrid-Powered Vehicles - Second Edition; To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 298 | SAE ARP6404-2011 | 2011-03-01 | English | Aircraft Tire Electrical Resistance Test |
| 299 | SAE AS27640/1-2011 | 2011-03-01 | English | BEARING, BALL, AIRFRAME, ANTI-FRICTION, HEAVY DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN) |
| 300 | SAE AS27645/1-2011 | 2011-03-01 | English | BEARING, BALL, AIRFRAME, ANTI-FRICTION, SELF-ALIGNING, LIGHT AND HEAVY DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN) |
| 301 | SAE AS3618-2011 | 2011-03-01 | English | CABLE, SAFETY, FERRULE, ELONGATED CORROSION AND HEAT RESISTANT STEEL, UNS S32100 |
| 302 | SAE ARP5758-2011 | 2011-03-01 | English | Trend Analysis for Maintaining Correlation of Gas Turbine Engine Test Cells |
| 303 | SAE AS5368C-2011 | 2011-03-01 | English | FITTING ASSEMBLY, ADAPTER – RING LOCKED PORT CONNECTION TO FLARED TUBE END, 3000 PSI |
| 304 | SAE AS5370A-2011 | 2011-03-01 | English | Multi-Transmitter Bidirectional Fiber-Optic Data Bus for Distributed Aircraft Control Systems - This document has been declared “Stabilized” by SAE |
| 305 | SAE AMS-T-81914/7A-2011 | 2011-03-01 | English | Tubing, Plastic, Flexible, Convoluted, Fluorinated Ethylene Propylene, Integral Braid
DoD Adopted |
| 306 | SAE AMS-T-81914/6A-2011 | 2011-03-01 | English | Tubing, Plastic, Flexible, Convoluted, Ethylene-Tetrafluoroethylene, Standard Convolution
DoD Adopted |
| 307 | SAE AMS-T-81914/5A-2011 | 2011-03-01 | English | Tubing, Plastic, Extra Flexible, Convoluted, Ethylene-Tetrafluoroethylene, Close Convolution
DoD Adopted |
| 308 | SAE AMS-T-81914/4A-2011 | 2011-03-01 | English | Tubing, Plastic, Extra Flexible, Convoluted, Fluorinated Ethylene Propylene, Close Convolution
DoD Adopted |
| 309 | SAE AS27646/1-2011 | 2011-03-01 | English | BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN) |
| 310 | SAE AMS-T-81914/3A-2011 | 2011-03-01 | English | Tubing, Plastic, Flexible, Convoluted, Fluorinated Ethylene Propylene, Standard Convolution
DoD Adopted |
| 311 | SAE AMS-T-81914/2A-2011 | 2011-03-01 | English | Tubing, Plastic, Extra Flexible, Convoluted, Polytetrafluoroethylene, Close Convolution
DoD Adopted |
| 312 | SAE AMS-T-81914/1A-2011 | 2011-03-01 | English | Tubing, Plastic, Flexible, Convoluted, Polytetrafluoroethylene, Standard Convolutions
DoD Adopted |
| 313 | SAE AS5729-2011 | 2011-03-01 | English | O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL |
| 314 | SAE AMS2814G-2011 | 2011-03-01 | English | Packaging and Marking of Packages of Welding Wire Premium Quality |
| 315 | SAE J2133-2011 | 2011-03-01 | English | Disc Wheel Radial Runout Low Point Marking - This document has been declared "Stabilized" by SAE |
| 316 | SAE J1939-71-2011 | 2011-03-01 | English | Vehicle Application Layer (Through May 2010) |
| 317 | SAE AMS4982E-2011 | 2011-03-01 | English | Titanium Alloy Wire 44.5 Cb - UNS R58450
DoD Adopted |
| 318 | SAE J851-2011 | 2011-03-01 | English | Dimensions - Wheels for Demountable Rims, Demountable Rims, and Spacer Bands - Truck and Bus - This document has been declared "Stabilized" by SAE |
| 319 | SAE AS85049/86B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 320 | SAE AS85049/85B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 321 | SAE AS85049/84B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)
|
| 322 | SAE AS85049/83B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELFLOCKING, SHIELD, BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)
|
| 323 | SAE AS85049/82B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)
|
| 324 | SAE AS85049/79B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 90°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 325 | SAE AS85049/78B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 45°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 326 | SAE AS85049/77B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 45°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 327 | SAE AS85049/69B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINKBOOT, CATEGORY 5 (MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 328 | SAE AS85049/62A-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS) |
| 329 | SAE AS85049/61B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, RING, POTTING BOOT, CATEGORY 5 (MIL-DTL-27599 CONNECTORS)
DoD Adopted |
| 330 | SAE AS85049/59A-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)
DoD Adopted |
| 331 | SAE AS85049/58B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, RING, POTTING BOOT, CATEGORY 5 (MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 332 | SAE AS85049/56A-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAINRELIEF, STRAIGHT, CATEGORY 4C (MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 333 | SAE AS85049/55C-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NON-ENVIRONMENTAL, 90°, SELF-LOCKING AND NON-SELFLOCKING, CATEGORY 4C (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
Do |
| 334 | SAE AS85049/54B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, 45°, CATEGORY 4C (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
DoD Adopted |
| 335 | SAE AS27641/1-2011 | 2011-03-01 | English | BEARING, BALL, AIRFRAME, ANTI-FRICTION, INTERMEDIATE DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN) |
| 336 | SAE AS26574A-2011 | 2011-03-01 | English | CIRCUIT BREAKER - TRIP-FREE, PUSH-PULL, 1/2 THRU 20 AMP, TYPE I
DoD Adopted |
| 337 | SAE AS27644/1-2011 | 2011-03-01 | English | BEARING, BALL, AIRFRAME, ANTI-FRICTION, DOUBLE ROW, HEAVY DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN) |
| 338 | SAE AS27643/1-2011 | 2011-03-01 | English | BEARING, BALL, AIRFRAME, ANTI-FRICTION, SELF-ALIGNING, DOUBLE ROW, HEAVY DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN) |
| 339 | SAE AMS-S-8802C-2011 | 2011-03-01 | English | (R) Sealing Compound, Temperature Resistant, Integral Fuel Tanks and Fuel Cell Cavities, High Adhesion
DoD Adopted |
| 340 | SAE AS4716B-2011 | 2011-03-01 | English | (R) Gland Design, O-ring and Other Elastomeric Seals
DoD Adopted |
| 341 | SAE AS4786A-2011 | 2011-03-01 | English | (R) Driver Drills, Battery Powered |
| 342 | SAE AS8037B-2011 | 2011-03-01 | English | Minimum Performance Standard for Aircraft Position Lights |
| 343 | SAE J583-2011 | 2011-03-01 | English | (R) Front Fog Lamp
DoD Adopted |
| 344 | SAE AS7928B-2011 | 2011-03-01 | English | Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For
DoD Adopted |
| 345 | SAE AS85049/17B-2011 | 2011-03-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGRY 2B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 346 | SAE J2933-2011 | 2011-03-01 | English | Verification of Brake Rotor Modal Frequencies |
| 347 | SAE AMS2355K-2011 | 2011-03-01 | English | Quality Assurance, Sampling and Testing Aluminum Alloys and Magnesium Alloy Wrought Products (Except Forging Stock), and Rolled, Forged, or Flash Welded Rings |
| 348 | SAE AMS2647D-2011 | 2011-03-01 | English | Fluorescent Penetrant Inspection Aircraft and Engine Component Maintenance |
| 349 | SAE AS85049/34B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NON-ENVIRONMENTAL, THREADED ADAPTER, CATEGORY 3C (FOR MIL-DTL-26482 SERIES 1 JAM NUT RECEPTACLE CONNECTOR)
DoD Adopted |
| 350 | SAE AMS4284J-2011 | 2011-03-01 | English | Aluminum Alloy Castings, Permanent Mold 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated - UNS A03560 |
| 351 | SAE AS85049/36B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY 3B (FOR MIL-DTL-27599 SERIES I AND MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 352 | SAE AMS4375L-2011 | 2011-03-01 | English | Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0) Annealed and Recrystallized - UNS M11311
DoD Adopted |
| 353 | SAE J1601-2011 | 2011-03-01 | English | Rubber Cups for Hydraulic Actuating Cylinders - This document has been declared "Stabilized" by SAE |
| 354 | SAE J640-2011 | 2011-03-01 | English | Symbols for Hydrodynamic Drives |
| 355 | SAE AMS6437H-2011 | 2011-03-01 | English | Steel, Sheet, Strip, and Plate 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) - UNS T20811
DoD Adopted |
| 356 | SAE AS85049/41B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, NON-ENVIRONMENTAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (FOR AS50151 GENERAL DUTY A ENDBELL AND AS85049 ACCESSORIES)
DoD Adopted |
| 357 | SAE AS85049/42B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, NONENVIRONMENTAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4A (FOR AS50151 SOLDER TYPE, V THREAD OF MS310X CLASSES A, B, C OR K CONNECTORS)
DoD Adopted |
| 358 | SAE AMS6439D-2011 | 2011-03-01 | English | Steel Sheet, Strip, and Plate 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.42 - 0.48C) (D6AC) Consumable Electrode Vacuum Melted, Annealed - UNS K24728
DoD Adopted |
| 359 | SAE J192-2011 | 2011-03-01 | English | Maximum Exterior Sound Level for Snowmobiles |
| 360 | SAE AS21428/1-2011 | 2011-03-01 | English | BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, PRECISION, CORROSION RESISTANT NITROGEN STEEL (CREN) |
| 361 | SAE AS85049/45B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, NONMETALLIC, CATEGORY 4C (FOR MIL-DTL-27599 SERIES I AND MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 362 | SAE AS85049/46B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, NONMETALLIC, CATEGORY 4C (FOR MIL-DTL-27599 SERIES I AND MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 363 | SAE J164-2011 | 2011-03-01 | English | (R) Radiator Caps and Filler Necks
DoD Adopted |
| 364 | SAE J128-2011 | 2011-03-01 | English | Occupant Restraint System Evaluation - Passenger Cars and Light-Duty Trucks - This document has been declared "Stabilized" by SAE |
| 365 | SAE AMS-WW-T-700/6B-2011 | 2011-03-01 | English | Tube, Aluminum Alloy, Drawn, Seamless, 6061
DoD Adopted |
| 366 | SAE J99-2011 | 2011-03-01 | English | Lighting and Marking of Industrial Equipment on Highways - This document has been declared "Stabilized" by SAE |
| 367 | SAE AMS2248G-2011 | 2011-03-01 | English | Chemical Check Analysis Limits Corrosion and Heat-Resistant Steels and Alloys, Maraging and Other Highly-Alloyed Steels, and Iron Alloys
DoD Adopted |
| 368 | SAE AS1986E-2011 | 2011-03-01 | English | FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/
DoD Adopted |
| 369 | SAE AS85049/53B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, STRAIGHT, CATEGORY 4C (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
DoD Adopted |
| 370 | SAE J2531-2011 | 2011-03-01 | English | Impulse Noise from Automotive Inflatable Devices |
| 371 | SAE ARP6404-2011 | 2011-03-01 | English | Aircraft Tire Electrical Resistance Test |
| 372 | SAE AS26574A-2011 | 2011-03-01 | English | CIRCUIT BREAKER - TRIP-FREE, PUSH-PULL, 1/2 THRU 20 AMP, TYPE I |
| 373 | SAE AS83519B-2011 | 2011-03-01 | English | (R) Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant General Specification For
DoD Adopted |
| 374 | SAE AS39029/2A-2011 | 2011-03-01 | English | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, (FOR MIL-C-81659 SERIES 1 CONNECTORS) - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 375 | SAE AS6146-2011 | 2011-03-01 | English | NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, UNS S66286 |
| 376 | SAE AS6099-2011 | 2011-03-01 | English | FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARED, 37° SPHERICAL
DoD Adopted |
| 377 | SAE AS6057-2011 | 2011-03-01 | English | JAUS Manipulator Service Set |
| 378 | SAE AS39029/8A-2011 | 2011-03-01 | English | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26482 SERIES 2 AND MIL-C-81703 SERIES 3 CONNECTORS) - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 379 | SAE AS85049/5B-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL CABLE SEALING, STRAIGHT, STEP-DOWN, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)
DoD Adopted |
| 380 | SAE AS85049/114C-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF-LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted< |
| 381 | SAE AS6038A-2011 | 2011-03-01 | English | (R) Bearing, Ball, Bellcrank, Antifriction, Airframe
DoD Adopted |
| 382 | SAE AS39029/7A-2011 | 2011-03-01 | English | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26482 SERIES 2 AND MIL-C-81703 SERIES 3 CONNECTORS) - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 383 | SAE J2531-2011 | 2011-03-01 | English | Impulse Noise from Automotive Inflatable Devices |
| 384 | SAE J1378-2011 | 2011-03-01 | English | Electric Hourmeter Specification - This document has been declared "Stabilized" by SAE |
| 385 | SAE AMS-P-83461/1B-2011 | 2011-03-01 | English | Packing, Preformed, Petroleum Hydraulic Fluid Resistant Improved Performance at 275°F (135°C) Sizes and Tolerances
DoD Adopted |
| 386 | SAE J2857-2011 | 2011-03-01 | English | Hybrid III 3-Year Old Child Dummy Users Manual |
| 387 | SAE AS85049/112C-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 388 | SAE AMS2813G-2011 | 2011-03-01 | English | Packaging and Marking of Packages of Welding Wire Standard Method
DoD Adopted |
| 389 | SAE AMS4213A-2011 | 2011-03-01 | English | Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated, Cold Worked and Naturally Aged - UNS A92027 |
| 390 | SAE AMS-P-83461/2A-2011 | 2011-03-01 | English | PACKING, PREFORMED, PETROLEUM-HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 °F (135 °C) FOR USE IN BOSS FITTINGS, SIZES AND TOLERANCES
DoD Adopted |
| 391 | SAE AS85049/115C-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 392 | SAE AMS2814G-2011 | 2011-03-01 | English | Packaging and Marking of Packages of Welding Wire Premium Quality
DoD Adopted |
| 393 | SAE AS26574A-2011 | 2011-03-01 | English | CIRCUIT BREAKER - TRIP-FREE, PUSH-PULL, 1/2 THRU 20 AMP, TYPE I |
| 394 | SAE AMS2814G-2011 | 2011-03-01 | English | Packaging and Marking of Packages of Welding Wire Premium Quality |
| 395 | SAE AMS2813G-2011 | 2011-03-01 | English | Packaging and Marking of Packages of Welding Wire Standard Method |
| 396 | SAE AMS6517-2011 | 2011-03-01 | English | Steel, Bars, and Forgings 3.5Cr - 9.5Ni - 18Co - 1.1Mo (0.13 - 0.17C) Double Vacuum Melted, Normalized, Annealed - UNS K93061 |
| 397 | SAE AS85049/111C-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, AS50151 SERIES I & II, AS81703 SERIES III, AND MIL-DTL |
| 398 | SAE AS85049/109C-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, NON-SELF LOCKING AND SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, AS50151 SERIES I & II, AS81703 SERIES III, AND MIL-DTL- |
| 399 | SAE AS85049C-2011 | 2011-03-01 | English | (R) Connector Accessories, Electrical General Specification For
DoD Adopted |
| 400 | SAE AS39029/3A-2011 | 2011-03-01 | English | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, (FOR MIL-C-81659 SERIES 1 CONNECTORS) - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 401 | SAE AS85049/117C-2011 | 2011-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMODATION, CATEGORY 3B FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS
DoD Adopted |
| 402 | SAE AS34501B-2011 | 2011-03-01 | English | CONNECTORS, RECEPTACLE, ELECTRICAL, WALL MOUNTING, REAR RELEASE, CRIMP CONTACT, AN TYPE
DoD Adopted |
| 403 | SAE AMS4213A-2011 | 2011-03-01 | English | Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated, Cold Worked and Naturally Aged - UNS A92027 |
| 404 | SAE PT-149-2011 | 2011-02-02 | English | Chevrolet Volt Development Story of the Pioneering Electrified Vehicle - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 405 | SAE AS39029/112A-2011 | 2011-02-01 | English | ELECTRICAL CONNECTOR, CONTACT BUSHING, WIRE BARREL |
| 406 | SAE AS20708/2A-2011 | 2011-02-01 | English | Synchro, Control Transmitter, Type 11CX4E
DoD Adopted |
| 407 | SAE AS5258/10A-2011 | 2011-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, T
DoD Adopted |
| 408 | SAE J1735-2011 | 2011-02-01 | English | Harmonized Vehicle Headlamp Performance Requirements - This document has been declared "Stabilized" by SAE |
| 409 | SAE J885-2011 | 2011-02-01 | English | Human Tolerance to Impact Conditions as Related to Motor Vehicle Design - This document has been declared "Stabilized" by SAE |
| 410 | SAE AS20708/1A-2011 | 2011-02-01 | English | Synchro, Control Transformer, Type 11CT4E
DoD Adopted |
| 411 | SAE J2233-2011 | 2011-02-01 | English | (R) Bus Body Heating System Test |
| 412 | SAE AS85049/63C-2011 | 2011-02-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL,STRAIN RELIEF, 90°, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 413 | SAE AIR81C-2011 | 2011-02-01 | English | (R) Importance of Physical and Chemical Properties of Aircraft Hydraulic Fluids |
| 414 | SAE AS81659/71A-2011 | 2011-02-01 | English | (R) CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (DUAL INSERT, TYPE IV, CLASS 1, (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A, CLINCH NUT MOUNT)
DoD Adopted |
| 415 | SAE J2282-2011 | 2011-02-01 | English | Distributed Lighting Systems (DLS) - This document has been declared "Stabilized" by SAE |
| 416 | SAE J774-2011 | 2011-02-01 | English | Emergency Warning Device and Emergency Warning Device Protective Container - This document has been declared "Stabilized" by SAE |
| 417 | SAE J639-2011 | 2011-02-01 | English | (R) Safety Standards for Motor Vehicle Refrigerant Vapor Compression Systems |
| 418 | SAE J2297-2011 | 2011-02-01 | English | Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a and R-1234yf (HFO-1234yf) Air-Conditioning Systems |
| 419 | SAE AS5272D-2011 | 2011-02-01 | English | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| 420 | SAE AS20708/16A-2011 | 2011-02-01 | English | Synchro, Control Differential Transmitter, Type 15CDX4D
DoD Adopted |
| 421 | SAE AS20708/17A-2011 | 2011-02-01 | English | Synchro, Torque Differential Transmitter, Type 15TDX4C
DoD Adopted |
| 422 | SAE AIR5913-2011 | 2011-02-01 | English | Landing Gear Shock Strut Heat Damage |
| 423 | SAE AS20708/19A-2011 | 2011-02-01 | English | Synchro, Torque Receiver Transmitter, Type 15TRX4A
DoD Adopted |
| 424 | SAE AS85049/57C-2011 | 2011-02-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL,STRAIN RELIEF, 45°, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 425 | SAE AS20708/21A-2011 | 2011-02-01 | English | Synchro, Control Transformer, Type 15CT6D
DoD Adopted |
| 426 | SAE AS3326A-2011 | 2011-02-01 | English | NUT, SELF-LOCKING-CAPTIVE WASHER, STEEL |
| 427 | SAE AS81659/61A-2011 | 2011-02-01 | English | (R) CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (SINGLE INSERT, TYPE III, CLASS 1, (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A)
DoD Adopted |
| 428 | SAE AS5258/6A-2011 | 2011-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle, Low Profile, Miniature
DoD Adopted |
| 429 | SAE AS5258/5A-2011 | 2011-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight, Low Profile, Miniature
DoD Adopted |
| 430 | SAE AS20708/4A-2011 | 2011-02-01 | English | Synchro, Torque Transmitter, Type 11TX4C
DoD Adopted |
| 431 | SAE AS5258/4A-2011 | 2011-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle, Low Profile
DoD Adopted |
| 432 | SAE AS5258/3A-2011 | 2011-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight, Low Profile
DoD Adopted |
| 433 | SAE AS5258/2A-2011 | 2011-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle
DoD Adopted |
| 434 | SAE AS28431A-2011 | 2011-02-01 | English | Aerospace Hand Torque Wrenches (Mechanical, Impulse) |
| 435 | SAE AS5258/1A-2011 | 2011-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight
DoD Adopted |
| 436 | SAE J2189-2011 | 2011-02-01 | English | Guidelines for Evaluating Child Restraint System Interactions with Deploying Airbags - This document has been declared "Stabilized" by SAE |
| 437 | SAE AS20708/5A-2011 | 2011-02-01 | English | Synchro, Torque Receiver, Type 26V-11TR4C
DoD Adopted |
| 438 | SAE AS20708/6A-2011 | 2011-02-01 | English | Synchro, Torque Transmitter, Type 26V-11TX4C
DoD Adopted |
| 439 | SAE AS20708/7A-2011 | 2011-02-01 | English | Synchro, Control Transformer, Type 26V-11CT4D
DoD Adopted |
| 440 | SAE AS5258/7A-2011 | 2011-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, T
DoD Adopted |
| 441 | SAE AS5258/8A-2011 | 2011-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable, Strain Relief and Sealing, Y
DoD Adopted |
| 442 | SAE AS20708/3A-2011 | 2011-02-01 | English | Synchro, Torque Receiver, Type 11TR4C
DoD Adopted |
| 443 | SAE AMS7908C-2011 | 2011-02-01 | English | Beryllium Near-Net Preforms Standard Grade Hot Isostatic Pressed |
| 444 | SAE ARP5890A-2011 | 2011-02-01 | English | (R) Guidelines for Preparing Reliability Assessment Plans for Electronic Engine Controls |
| 445 | SAE J2114-2011 | 2011-02-01 | English | Dolly Rollover Recommended Test Procedure - This document has been declared "Stabilized" by SAE |
| 446 | SAE AS20708/8A-2011 | 2011-02-01 | English | Synchro, Control Transmitter, Type 26V-11CX4C
DoD Adopted |
| 447 | SAE AS20708/9A-2011 | 2011-02-01 | English | Synchro, Control Differential Transmitter, Type 26V-11CDX4C
DoD Adopted |
| 448 | SAE J2064-2011 | 2011-02-01 | English | R134a Refrigerant Automotive Air-Conditioned Hose |
| 449 | SAE AS20708/14A-2011 | 2011-02-01 | English | Synchro, Control Transmitter, Type 15CX4D
DoD Adopted |
| 450 | SAE AS5258/9A-2011 | 2011-02-01 | English | Insulating Components, Molded, Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, 1 to 3
DoD Adopted |
| 451 | SAE J1980-2011 | 2011-02-01 | English | Guidelines for Evaluating Out-of-Position Vehicle Occupant Interactions with Deploying Frontal Airbags - This document has been declared "Stabilized" by SAE |
| 452 | SAE AS20708/15A-2011 | 2011-02-01 | English | Synchro, Control Transformer, Type 15CT4C
DoD Adopted |
| 453 | SAE J1970-2011 | 2011-02-01 | English | (R) Shoreline Sound Level Measurement Procedure for Recreational Motorboats |
| 454 | SAE AS20708/28A-2011 | 2011-02-01 | English | Synchro, Control Transmitter, Type 18CX4D
DoD Adopted |
| 455 | SAE J1527-2011 | 2011-02-01 | English | Marine Fuel Hoses |
| 456 | SAE AS9552C-2011 | 2011-02-01 | English | (R) BRACKET, FLAT, CRES UNS S32100 |
| 457 | SAE J1970-2011 | 2011-02-01 | English | (R) Shoreline Sound Level Measurement Procedure for Recreational Motorboats |
| 458 | SAE J2762-2011 | 2011-02-01 | English | Method for Removal of Refrigerant from Mobile Air Conditioning System to Quantify Charge Amount |
| 459 | SAE AS28431A-2011 | 2011-02-01 | English | Aerospace Hand Torque Wrenches (Mechanical, Impulse) |
| 460 | SAE AS28431A-2011 | 2011-02-01 | English | Aerospace Hand Torque Wrenches (Mechanical, Impulse) |
| 461 | SAE AMS-A-22771B-2011 | 2011-02-01 | English | Aluminum Alloy Forgings, Heat Treated
DoD Adopted |
| 462 | SAE AMS4212K-2011 | 2011-02-01 | English | Aluminum Alloy Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated - UNS A03550
DoD Adopted |
| 463 | SAE AMS4932C-2011 | 2011-02-01 | English | Titanium Alloy Sheet 6Al - 4V Driver Sheet - UNS R56400 |
| 464 | SAE AMS5645R-2011 | 2011-02-01 | English | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated - UNS S32100
DoD Adopted |
| 465 | SAE AS4405A-2011 | 2011-02-01 | English | (R) FITTING ASSEMBLY, ADAPTER, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
DoD Adopted |
| 466 | SAE AS4406A-2011 | 2011-02-01 | English | (R) FITTING ASSEMBLY, UNION, REDUCER AND NONREDUCER, INTERNAL FLARE
DoD Adopted |
| 467 | SAE AS4407A-2011 | 2011-02-01 | English | (R) FITTING ASSEMBLY, ELBOW 90°, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
DoD Adopted |
| 468 | SAE AS4408A-2011 | 2011-02-01 | English | (R) FITTING ASSEMBLY, ELBOW 90°, REDUCER AND NONREDUCER, INTERNAL FLARE
DoD Adopted |
| 469 | SAE AS4409A-2011 | 2011-02-01 | English | (R) FITTING ASSEMBLY, ELBOW 45°, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
DoD Adopted |
| 470 | SAE AS6003-2011 | 2011-02-01 | English | TTP Communication Protocol |
| 471 | SAE AS20708/22A-2011 | 2011-02-01 | English | Synchro, Control Differential Transmitter, Type 15CDX6C
DoD Adopted |
| 472 | SAE AS20708/23A-2011 | 2011-02-01 | English | Synchro, Torque Receiver Transmitter, Type 15TRX6A
DoD Adopted |
| 473 | SAE AS20708/25A-2011 | 2011-02-01 | English | (R) Synchro, Control Transformer, Type 16CTB4b
DoD Adopted |
| 474 | SAE AS20708/29A-2011 | 2011-02-01 | English | Synchro, Control Transformer, Type 18CT4C
DoD Adopted |
| 475 | SAE AS20708/30A-2011 | 2011-02-01 | English | Synchro, Control Differential Transmitter, Type 18CDX4C
DoD Adopted |
| 476 | SAE AS20708/31A-2011 | 2011-02-01 | English | Synchro, Torque Differential Transmitter, Type 18TDX4C
DoD Adopted |
| 477 | SAE AS20708/32A-2011 | 2011-02-01 | English | Synchro, Torque Receiver Transmitter, Type 18TRX4A
DoD Adopted |
| 478 | SAE AS20708/33A-2011 | 2011-02-01 | English | Synchro, Control Transmitter, Type 18CX6C
DoD Adopted |
| 479 | SAE AS20708/34A-2011 | 2011-02-01 | English | Synchro, Control Transformer, Type 18CT6D
DoD Adopted |
| 480 | SAE AS20708/35A-2011 | 2011-02-01 | English | Synchro, Torque Receiver Transmitter, Type 18TRX6B
DoD Adopted |
| 481 | SAE AS20708/36A-2011 | 2011-02-01 | English | Synchro, Control Differential Transmitter, Type 18CDX6D
DoD Adopted |
| 482 | SAE AS20708/45A-2011 | 2011-02-01 | English | Synchro, Control Transmitter, Type 23CX4D
DoD Adopted |
| 483 | SAE AS20708/46A-2011 | 2011-02-01 | English | Synchro, Control Transformer, Type 23CT4C
DoD Adopted |
| 484 | SAE AS20708/47A-2011 | 2011-02-01 | English | Synchro, Control Differential Transmitter, Type 23CDX4C
DoD Adopted |
| 485 | SAE AS20708/48A-2011 | 2011-02-01 | English | Synchro, Torque Differential Transmitter, Type 23TDX4C
DoD Adopted |
| 486 | SAE AS20708/49A-2011 | 2011-02-01 | English | Synchro, Differential Receiver, Type 23TDR4B
DoD Adopted |
| 487 | SAE AS20708/50A-2011 | 2011-02-01 | English | Synchro, Torque Receiver Transmitter, Type 23TRX4A
DoD Adopted |
| 488 | SAE AS20708/52A-2011 | 2011-02-01 | English | Synchro, Control Transmitter, Type 23CX6D
DoD Adopted |
| 489 | SAE AS20708/53A-2011 | 2011-02-01 | English | Synchro, Control Transformer, Type 23CT6D
DoD Adopted |
| 490 | SAE AS20708/54A-2011 | 2011-02-01 | English | Synchro, Control Differential Transmitter, Type 23CDX6C
DoD Adopted |
| 491 | SAE AS39029/77A-2011 | 2011-02-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS)
DoD Adopted |
| 492 | SAE AS39029/83A-2011 | 2011-02-01 | English | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-28840 CONNECTORS)
DoD Adopted |
| 493 | SAE AS39029/84A-2011 | 2011-02-01 | English | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-28840 CONNECTORS)
DoD Adopted |
| 494 | SAE AS39029/106B-2011 | 2011-02-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, (FOR MIL-DTL-38999 SERIES I, III, IV, MIL-DTL-55302 AND AS29600 SERIES A CONNECTORS)
DoD Adopted |
| 495 | SAE AS39029/107B-2011 | 2011-02-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, (FOR MIL-DTL-38999 SERIES I, III, IV, MIL-DTL-55302 AND AS29600 SERIES A CONNECTORS)
DoD Adopted |
| 496 | SAE AS85049/3A-2011 | 2011-02-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)
DoD Adopted |
| 497 | SAE AS85049/15B-2011 | 2011-02-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 45°, NON-SELF-LOCKING AND SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 498 | SAE AS85049/16B-2011 | 2011-02-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, NON-SELF-LOCKING AND SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 499 | SAE AS85049/120A-2011 | 2011-02-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90° SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) |
| 500 | SAE AS85049/123B-2011 | 2011-02-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90° SELF-LOCKING, AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
|